Echo 1 M28 Review w/ Natural Lighting

[madcow3095]

do you recomend a tigh bore ? idk if i wanna spend money on one and idk what size to get. thanks

[annisman]

@madcow3095 From what I have seen it comes with a 6.03 barrel stock.

[madcow3095]

@annisman na like length lol

[Cravona]

@madcow3095 495mm

[ProductionsDx]

Would it hurt to get shot from 130 ft away with this gun?(I wanna know because im going to get this gun and shoot my friend)

[ovandolah14]

Pretty nice paint job.............probably the only thing i like about that gun.

[TenerifeAlphaAirsoft]

Whats the difference between this and the Javalin M24? Is it APS2 compatable?

Thanks, i subbed btw :)

[Cravona]

@TenerifeAlphaAirsoft To be honest, I couldn't really tell you. I'm not much of an airsoft sniper myself (this is a teammates rifle). As far as I know, this has a few differant internal components than the Javelin (better parts). As far as APS2, I'm not sure.

[greymanthe]

@Cravona The ECHO1 (on contrary to logical on asr) is an A&K rebrand, not a snow wolf rebrand. The Echo1/ A&K uses the Marui system (It takes marui parts, but the cylinder parts need slight modifications, very easy to do). The Javelin or snow wolf M24 uses a completely APS-2 system.

[Cravona]

@greymanthe Thanks for the info man. I'll definitely pass that along to anyone with questions.

[sargentghost24]

my echo1 looks the same kinda i have a echo1 barrel exstension and little bit different paint job

[XxSiRwAfFlEsxX]

What scope is that, and is it good. What are the specs and how much was it.

[TheTitanium22]

The one dislike is because a 10 year old went pee when he heard the back round water, and he thought you said hair style bi pod.

[MrSilence247]

Like what deathfromasian said, i'm painting my Well l96 would it be best just to take the two main parts of the sniper apart, and then paint it? Or could I just lightly put the tape over the bolt and then do the same paint technique you used. Anyway thanks for all of the videos it's helped me alot.

[Cravona]

@MrSilence247 You could do either to be honest. If you can, remove the bolt/barrel from the stock and paint the two pieces separately. Either way though, if you can't remove the actual bolt from the receiver, you will have to tape the bolt.

[XxSiRwAfFlEsxX]

@MrSilence247 i say you make or buy the ghillie wrap that fits the enviornment you play in,becuased its removable and looks sick, and it blends in better

[theblissster]

this or the 250$ well g96? i am in a tough decision.... do you think you could hit a one foot across target at about 150 feet away? id like to know just how accurate this is

[Kole208]

so just how acurate is this gun whats its range whats your farthest kill with it an estimation what do u think it is acurate up to and im replaceing the iner with a matrix 300% wich will make it shoot around 550 fps and do u think this will shoot as far as the gi g98

[Kole208]

very very butiful paint job i am getting this gun and putting in a matrix 300% in it but just love your paint job its not the way i woulda done my desert comon i would use like cristmas tree leaves and paint it on but i do just love ur paint job if i was like that i would get my gun painted like that and so far how good is the gun any problems yet?

[combatReady1538]

i have the same exact scope as yours and i just bought that gun :D

[ercrazy5]

Do you do custom paint jobs

[Cravona]

@ercrazy5 I have been asked but no one has followed through with it. I'll be putting out a video in the next week or so about how to paint like I did in my CQBR video.

[jupitersend]

Nice paint job.



[deathfromasian]

i want to paint my sniper but how did u cover the bolt to stop the paint from going into the bolt and cause a sticky bolt

[TheChief417]

@deathfromasian probably painter's tape.

[TheChief417]

@deathfromasian actually now that I think about it he probably took it apart.

[Cravona]

@deathfromasian I'm not sure if my friend took it apart or used painters tape. Either would work.

[deathfromasian]

@Cravona wouldnt painters tape ruin the oil on the bolt?

[Cravona]

@deathfromasian Now that you mention it I believe it could. To be safe I guess, try and dissasemble it.

[Knightsairsoftteam]

That paint looks gorgeous, what paints did you use?

[Cravona]

@Knightsairsoftteam Paint was Rustoleum "Camoflauge" series.

[TheUvakid110]

One more question... I'm seeing a lot of other guns tht look exactly the same as this one, and have the same discription on the websites... cheaper too ( UK arms M24, X28, Matrix M24 etc. ) Please respond! im on the fence about buying this gun and i already subscribed. Thanks

-Jeremy

[larzulrich199]

WHAT IS THE EFFECTIVE RANGE

[TheUvakid110]

Any slam firing yet?



[Cravona]

@TheUvakid110 So far, no.

[Ghilled1]

@TheUvakid110

I would rather go with the Echo 1 Advanced sniper (ASR) and by the upgrade kit and a 6.01mm inner barrel and it will shoot 530 fps easy

[TheUvakid110]

Anything above tht u can see into ur target's soul... NICE!!!

[konidragon]

Can u do a video on how to paint the m28 like that?

[KDOG1352]

GREAT paint job! how did you paint the scope?!

[EmazingAzn]

Which is the better sniper rifle among the following:

TM VSR 10 PRO

TM VSR 10 G SPEC

JG BAR 10

CA m24 ENCHANCED

ECHO 1 M28

[Cejo871]

can you please tell me what bbs you use because i am going to get .3 and want to know if i should get more or less gram

[Cravona]

@Cejo871 .3's should be just fine.

[Cejo871]

@Cravona thank you i knew i was right and one last question how hard is it to pull back is it so easy you just need to push it up and pull back or do you really need to try hard or what sweat paint job though

[Cravona]

@Cejo871 The bolt is fairly easy to pull back, however some effort is needed.

[Cejo871]

@Cravona ok thank you for all your help and hope to see you in up coming videos and if you live near illinois i would like to see you at cpx sports airsoft its very nice

[KPcashelTHF14]

I am gettin this for my sniper loadout. i cannot waaaiiit. may paint it, probly not. just go with some camo tape if i need to. SEXY GUN

[lildewie2]

im getting the same exact set up!!! and i might paint it too

[jwalburg10]

How long is it in inches

[Cravona]

@jwalburg10 It is 1025mm. Or 40 Inches.

[jwalburg10]

How long is it in inches

[aaronr700]

wer did u get it from

[Cravona]

@aaronr700 AirsoftGI

[Cravona]

@SHNERFINATOR Base layer was done with Khaki. Then brown was lightly dusted on.

[happycrazyugly]

@Cravona i have a question about the scopes, which one would you recomend, the 4X32 or the 3-9X40?

[Cravona]

@happycrazyugly I believe the 3-9x40 would be the best bet.

[julianleeho]

is th einternals of this gun the same as the vsr 10's?

[Cravona]

@julianleeho I don't believe so. Although I've heard they are similar and some can be modified to fit.

[BLOODSHOT9902]

damn i would love to play airsoft in that snow

[TheCodman321]

is it raining

[Cravona]

@TheCodman321 No. The snow had just melted and water was dripping off of the roof. Unfortunately we did not find this was audible until after filming as the playback on the camera didn't allow us to hear it.

[RaptorDiablo]

see in my targets soul... lol i wish, so i can shoot it :3.

[punaboy12]

Boo.. lol

[airsoftTX]

where did you get that scope

[Cravona]

@airsoftTX Can't remember the exact website, but you can find it lots of places. Google search "Leapers 3-9x40 Scope w/ Sunshade" and you should find it.

[TheCodman321]

@Cravona that scope rules got it on my utg l96

[TheMonitorwipes]

BEAUTIFUL paint job!

[Cravona]

@TheMonitorwipes Thank you very much!

[TheMonitorwipes]

@Cravona Did you use Krylon Camo Paint for it?

[Cravona]

@TheMonitorwipes I actually used Rustoleum "Camouflage" paint.

[stealthyairsoft996]

do the mags ever jam and does it perform well in combat

[Cravona]

@stealthyairsoft996 As far as I know (the rifle is a friends), the mags haven't jammed. I also cannot say how it performs as I have not used it.

[EDDIETHEGREAT100]

Make A paint tutorial please

[mistahkickbutt]

Is there a fire going? I guess thats what the 'natural lighting' means.

[KMAirsoftTeam]

Did u paint the gun???

[Cravona]

@KMAirsoftTeam Yes sir.

[Cravona]

@ApacheAirsoftTV Thanks man.

[snipingace34]

Nice! i got mine yesterday but the scope was too small :( what website did you get your scope?

[Cravona]

@snipingace34 Can't remember the exact website, but you can find it lots of places. Google search "Leapers 3-9x40 Scope w/ Sunshade" and you should find it.

[TheRunescapefreak99]

@Cravona im getting the m28 and a armored leapers 3-9x40 scope cant w8 till i get it ^^

[IMsuperDUPERable]

@TheRunescapefreak99 try the 3-9x50 from evike.com its only an extra $2 and it has nothing to do with the zoom as far as I know i think its just the field of view thats bigger.

[Cravona]

@ApacheAirsoftTV Haha thank you. We were debating leaving them out or not. Glad to hear we made the right choice!