hmm i have no idea :D i know i wrote all the voltages down, but i don't know where....i'll check the papers asap. if i find anything, i'll post it here. take care
Hey, Ive pretty much finished my gaussmarkov PCB build but Ive hit a dead end in the true bypass and power supply. What does GNB3V mean? and could someone send my a bypass circuit that bypasses a battery so that it doesnt wear down, or do I have to use a mains supply, in which case bypassing the power would be irrelivant.
sorry can't don't sell efects at this point, but if you have a little DIY enthusiasm, go to gaussmarkov's web page and build one. It's a simple project really. Take care
Kustom has a new model line out. Budget priced and they sound like more or less, they hijacked the Dr Boogie and used it for their preamp. Don't think it much matters though, everyone is going so high gain and using hollowing tone stacks so it's basically become the standard sound.of everyone's amps be they chip or tube.
@jamfxpedals Would it be possible for you to check your circuit and compare it with the GaussMarkov schematic? Your pedal sounds way better than my version. Granted, I removed the tone-stack and the pedal is currently built on breadboard :) Maybe it is time to tune the JFET drain trimpots like you mentioned?
hmmm i don't know the values anymore sorry .... i got about 4,5V (@9V supply) to each tranzistor and than tuned it up by ear....it takes quite a long time, but u get a fu**** growly pedal out of it :D
just like pipebag said....J201 are the best j-fets for this project....i think that 2n5457 would work as well, or bf245 (not sure if this is the right one), but i haven't tried any of those really. i prefer j201
great job! pedal sounds tasty :) where did you find schematics? i looking for jcm800 or plexi emulator schematics, can you help me? sorry if my english sucks :P
tnx for ur reply (and sorry for my late reply :D )
it sounds like dual rec on solo (imo crapy and too thin :D ) i don't like Dr. Boogey's or Dual rectifiers solo sound, but its has the best rythm pedal.
wow, the last part of the video sounds great..what are the settings for this on the pedal?
antissimo 1 year ago
hmm i have no idea :D i know i wrote all the voltages down, but i don't know where....i'll check the papers asap. if i find anything, i'll post it here. take care
jamfxpedals 1 year ago
Hey, Ive pretty much finished my gaussmarkov PCB build but Ive hit a dead end in the true bypass and power supply. What does GNB3V mean? and could someone send my a bypass circuit that bypasses a battery so that it doesnt wear down, or do I have to use a mains supply, in which case bypassing the power would be irrelivant.
Tomcom403 1 year ago
sorry can't don't sell efects at this point, but if you have a little DIY enthusiasm, go to gaussmarkov's web page and build one. It's a simple project really. Take care
jamfxpedals 1 year ago
Kustom has a new model line out. Budget priced and they sound like more or less, they hijacked the Dr Boogie and used it for their preamp. Don't think it much matters though, everyone is going so high gain and using hollowing tone stacks so it's basically become the standard sound.of everyone's amps be they chip or tube.
...digital is bound to catch up soon!
JonDeth 1 year ago
Where can i buy this pedal?
Gyro911 2 years ago
You can't, yet. Right now, you have to build it.
jburton0001 2 years ago
How hard is it to build such a thing if you never have built a pedal?
uiterniels 2 years ago
can someone build me this pedal. or at least the pc board. contact me if you can.
stratman7000 2 years ago
gaussmarkov
jamfxpedals 2 years ago
can u share your mods? my Dr Boogey has more treble.
ubaid88 2 years ago
was this layout..from the gaussmarkov...or aron site i have built both...just wondered which this is........
100roberthenry 2 years ago
we modded the tonestack a bit to get more bass response....i forgot what it was coz it's a year ago or more.
jamfxpedals 2 years ago
@jamfxpedals how much would it cost for you to build me one?
openthedoar 1 year ago
@jamfxpedals Would it be possible for you to check your circuit and compare it with the GaussMarkov schematic? Your pedal sounds way better than my version. Granted, I removed the tone-stack and the pedal is currently built on breadboard :) Maybe it is time to tune the JFET drain trimpots like you mentioned?
What are your JFET drain-to-ground voltages?
inspiredinfidel 1 year ago
nope we modded it a bit
jamfxpedals 2 years ago
What mods did you do?
meffcio 2 years ago
Thank you.
You use the default schema or you have changed?
Thanks,
Alexis
alexis4624 2 years ago
hmmm i don't know the values anymore sorry .... i got about 4,5V (@9V supply) to each tranzistor and than tuned it up by ear....it takes quite a long time, but u get a fu**** growly pedal out of it :D
jamfxpedals 2 years ago
Good evening,
Excuse me, I produce the same effect you but I just can not solve the voltage of Q1 Q2 Q3 Q4 and Q5. I use it as planned J201.
Could you please tell me how you've set for each transistor please.
Thank you.
Alexis
alexis4624 2 years ago
Hi,you done it great,are some replacments for J201,do you know?Thanks
Livitation3 2 years ago
if you want quality sound, replacements aren't the way to go, just the J201 do the work fine, with the others the results will be shitty
try to get them, is not too hard, you can order them all over the internet
PipebagCFH 2 years ago
just like pipebag said....J201 are the best j-fets for this project....i think that 2n5457 would work as well, or bf245 (not sure if this is the right one), but i haven't tried any of those really. i prefer j201
jamfxpedals 2 years ago
great!
what is the 1st song you played?
petossido 2 years ago
Hey, what schematics did you use to make this pedal? Could you tell us the website?
Thank You.
reizeinr 2 years ago 2
gaussmarkov with a couple of my own modifications
jamfxpedals 2 years ago
its 9V in this video, but it can go up to 18V and more (caps r rated atleast 25volts)
jamfxpedals 3 years ago
great sound!!! do you use only 9 volts for that pedal or more?
MisterKuss 3 years ago
dr boogey is the best dual rect emulator pedal!
ntulntul 3 years ago
great job! pedal sounds tasty :) where did you find schematics? i looking for jcm800 or plexi emulator schematics, can you help me? sorry if my english sucks :P
fafa88xxx 3 years ago
tnx guys ;) mattmcqueen88,send me a PM
jamfxpedals 3 years ago
The sound clip with the PRS was brutal XD
Karasu192 3 years ago
wanna sell it. or build one for me?
mattmcqueen88 3 years ago
hey,
tnx for ur reply (and sorry for my late reply :D )
it sounds like dual rec on solo (imo crapy and too thin :D ) i don't like Dr. Boogey's or Dual rectifiers solo sound, but its has the best rythm pedal.
we'll record a solo 4 u as soon as possible.
take care
JaMFX
jamfxpedals 3 years ago
oh my fucking god... Awesome pedal
ow much it cost? can you do some solo for me?
like john petrucci :P or at leas a solo to ear how it sounds!
fumancha 3 years ago