Jet boat, Tenerife. Dual V8-engined, turbo big-block.

[estfano68]

i aslo worked for paul for a short time in late 2008 till feb 2009,i think he still has the boat stored at a good friend of mine in tenerife,last i heard from him he was working on a rig off the coast of norway.paul if you read this love to the family,steve

[chadjitsu1]

you need to add a few more non functional scoops, you only have 4 on there right now, maybe you can get another one from autozone.

[themechanic345]

What's the point of turbos on that? Aren't they for HP through acceleration and varying RPMs?

[steelmesh]

Is that a tourist vessel?

[handiest1]

looks kinda stupid

[VIKINGODIN]

I thought it was a woman driving until he moved lol

[tigerfanfanatic72]

Have ya'll every submarined the boat or thought of it? My dad's friend has a 22 foot jet boat and he submarines it. It is a ton of fun and gets out hella wet. Make sure you have a good bilge though.

[harorider95]

Yupp Ls* blocks

[MrYorkshire666]

thats simler to my mates boat in motor grande puerto rico gran canaria big red nice boat tho oh ye lol out boards are shit all of us who play with boats know lmao

[jordyboy0129]

i have a boat that could thrash that boat to the bone it has triple 350hp yamaha v8s in total 1050hp on a rib aswell

[madrx2]

@jordyboy0129 Jordy boy, Who do you think you are fooling??? Your a child with a toy boat.... Everyone go to this kid's youtube account he has 2.3 meter tinny with a mariner 3.3hp engine.

Come back in about 20 years after you grow up/get a job and some how make enough money to have a 1050Hp rib. Keep dreaming kiddo and it Can happen

[jordyboy0129]

@madrx2 ye i am a marine a trained marine machenic i have over 40 boats including a bayliner and i will send you a link to the rib with the 3x 350hp if you want i also have a mariner 8hp on a rib a honda 8hp on a rib 20hp honda 4 stroke on a rib honda 50hp on a dory mercury 150hp opti on a rib and many more look through more videos before you just see one of my little tenders dumbass

[AaronWallace]

Look at those fuggin intake manifolds! METAL.

[CatScooters1]

Sounds good,lotsa grunt,i bet it wouldn't last 10 secs against my 2.5 2 stroke black max.10,000 revs,ceramic pistons.etc.

[madrx2]

@CatScooters1 who care's about outboards...... No one

[jordyboy0129]

@madrx2 infact outboards can put allot more power down so dont argue with me because i am in the marine mechanic trade

[madrx2]

@jordyboy0129 Well you wont last long in the trade you moron. What do ships run, Pod's and inboards. What do all of the fastest race boats run? Inboards. Go play with your 8hp outboard that's in your video's you little kid. Come back when you have some knowledge about the boating industry

[jordyboy0129]

@madrx2 WELL INBOARDS CAN RUN ON PETROL OR DESIEL AND ITS WHERE THE ENGINE IS INSIDE THE BOAT WITH EITHER A STERN DRIVE OR A STRAIT ENTERING PROP WITH A RUDDER THE STERN DRIVE IS FASTER THAN THE STRAIT THROUGH PROP WITH RUDDER E.G. THE MASTERCRAFT. THE FASTEST TYPE OF RACEBOATS RUN ON JET TURBINES THEN ITS THE OUTBOARD RACING ENGINES THEN ITS INBOARDS JET DRIVES THEN THE STERN DRIVES I DO NOT WORK WITH SHIPS I WORK ON CANAL BOATS AND INBOARD MOTOR CRUZERS AND RIBS SOME HAVE OUTBOARD JET INBOARD

[MrYorkshire666]

big red in gran canaria is better he lives by me el valle both beautifull boats tho

[haze656]

looks like it for show boating

[Th0mS0n1991]

@rightfredsdead Time for glasses for you i guess xD, those look like life-jackets too me xD

[chillincruisin]

=/ some sort of tour boat? shame, that would make a kick ass weekend pleasure boat. And i bet a innertube on the back of that thing would be hella awesome.

[dirtrider383]

didnt see no turbos

[dieseldog00]

That's the stubbiest boat with twins I've ever seen. 25 feet maybe? Does he take it in the ocean or are there rivers on Tenerife he goes on? I like the jet drives, makes good acceleration when the boat is full of people gear and fuel. Those motors would make 40-50hp more each with better exhaust(CMI). Gale Banks has come out with twin turbo Duramax diesel engines rated at 500hp/800tq. Plenty of low end grunt and would save on fuel. Not cheap though, probly US $50K.

Is the boat back in Charter?

[CatScooters1]

@dieseldog00 here here,mate,lot of dollars for wank value,looks good,no good for much else.......

[fuasshole666]

nice turn bro

[01Disco]

I saw this awsome boat in action. You did a great job Paul. Forget those idiots below.

[pauljetblaster]

hi iansing thanks for uploading your video nice one mate from all the jet blaster team.

[pauljetblaster]

hi bigman, the jet blaster runs 2 *496 with1000 CFM intakes ,the teiple scoops are very functionl under the scoops are 6 inch pipes ,6 inch high pointing aft .the engine conpartment is 98 % dry and engine temp water and oil are perfect........as for very ugly i am sure your wifes rear ends very fat and ugly .fucking twat.

[mvpicemann]

@pauljetblaster hello paul,its wez from medina village paint and body repairs in cowes.i sprayed tony hamilton's p1 dog gone.sure u remember wasn't that long ago.how you doing sir?jet blaster looks a little different from when it was here.fine effort my friend.hope it surpassed all your expectations.looks and sounds the nuts.would have looked better if id sprayed it 4 u mind!!!well done bud,wasn't a easy project seemed like it was uphill battle nearly all the way 4 u.hope life is treating you w

[dellandchip55]

i have a paddle boat thats faster than this canoo

[dangershark2]

sure drinks alot of gas huh

[01Disco]

In 2008 I was on Tenerife close to P.Colon. There were a few times when we where on the beach that I saw the boat in action. I can tell you when you see and hear the sound of the boat in action, you know it's special. Before finding out it was the jetb boat I already did some jetski runs and decided that it was enough for this year. In 2009 I was back on Tenerife full expecations. Sadly I found out that it wasn't in business anymore. Who knows where this boat is today? And who is running it now?

[megafatmat]

I am the chubby guy on the back I had the pleasure of working for these lovely people last summer. Hope to see it back here in Tenerife in 2010. Wherever you guys are hope things are good. Big love as always to the kids.

[lansing9r]

Pretty sure I saw Paul in Inverness the other night.... maybe he's jacked it in, or was just home for a holiday :)

[jdutton100]

@megafatmat its called pleasantly plump lol

[kevincullen1]

where can i be getting one of these

[bradmac75]

This boat looks so different, i havent see a boat like this,

[mattgreen68]

What a mad trip so wet, screeming girls,

Paul you must have the best job

[HondaSuperSport1100]

passing everything but the gas pump!

[2010gtr]

oryt paul al neva forget the holiday in tenerife coz o the jet blaster.

ITS A BEAST O A BOAT

paul ur a LEGAND !!!!!!!!!!!!!!

[darylandrewmaclean]

Thats my uncles boat his name is paul thompson

[lansing9r]

I knew him when he used to work for Mitchells and Pro-bike in Inverness. :)

[fmosracing]

Aren't those LSx motors, not big blocks?

[lansing9r]

They could well be - I'm not up on my engine models, I was only going on what Paul had written on the flyer they were handing out :)

[godgunplay2]

@fmosracing an lsx is a big block. usually they are 427s in vettes.

[MrUltraworld]

@godgunplay2 LSX is a small block. Built one for my GTO & one for my '67 Nova. The displacement can run from 350 cu in up to almost 500.

[MrUltraworld]

@fmosracing Yep

[manorboi20]

@fmosracing i thought the lsx were 454 which are big blocks?

[wtfisthis1989]

hear the turbo whistles at 0:52 sick ^^

[orfeasGreek]

awesome.. 5/5