Good vid, Nutn. I love ZT knives. I have 3, one of which is the 0100 fixed blade with that huge, bulky sheath.For the record, you're 100% right about that sheath. If they offered a kydex alternative I'd buy it in a heartbeat but the knife itself is loaded with awesome. I classify these knives as emergency equipment and I want to know the knife can take whatever I throw at it. ZT knives are built like tanks. Seriously, they're panzerized!
ZT knives are worth every penny and their collaborations with custom knife makers not to mention there top notch quality make them probably the best production knives out there. You can buy your cheap spydercos but they will never hold up to the use that ZT knives can easily handle on a bad day.
i dont think ZT knives are over priced at all, I have a 0301 that is a beast of a knife people bitch and complain about cheaper knives that they have to constantly sharpen and take care off because they dont want to shell out the extra bucks for better steel and lockup.
hey nutn! you never got back to my email about how I can donate to the TNP! but I was wondering if you know whether or not if we can put that clip that is on the ZT 560 on the ZT 550 cause I like the deep carry clip much better!
Love that first Rick Hinderer design, I am actually drooling over it but it's too expensive so I'll never own it. I can buy a gun for the price of these ZT knives especially the 777, holy cow 600 bones for a knife, no way. I own a couple $150 dollar knives and I barely get more enjoyment out of them than my delica and endura knives. Also I agree with Nutn about those sheaths shown in the video.
@whispers221 This. I agree, way too expensive for me, but, if I could afford it, I would buy that 777 (sooooo sexy). And that one sheath... I was digging that knife up until he showed the sheath. If they made it cleaner, with holes for attaching it to molle or use with paracord (like some of their other kydex sheaths), then I would definitely consider buying that knife. With that overly massive and bulky sheath, I would never buy it. That's just my opinion.
I agree with dade, there the ones we 'look' at but there never gonna be in my pocket. Plenty of other bargain blades that can get the same job done(Kershaw). Definitely a second type of cool knife, but way out of my league and price range
I honestly dont understand how people can hate a knife for being expensive! This knife was the overall knife of the year it is incredible! You get what you pay for every single time
I've got a 0550, and I was very hesitant to buy it at first because I had heard several negative things about it, but after I finally got one, I love it. It is built like a tank and everything about it is perfection. Thanks for the awesome review brother! Loved every second of it. Can't wait to get my 0560 and 0777.
BTW* The nylon sheath for that one knife... yea. WAY too gauky
Love it NutN, long time sub, and I appreciate everything you're doing for the project. I.E. traveling to SHOT to get us all the inside info on the new stuff! Love it!
Great review on ZT knives. I like the ZT line of knives for my EDC is the 0400ST. It is slighty heavy but very well built and I have 0170 as well. I like the little boot knife for that was a second kind of cool to me. Nutn, this was a great review and thanks for doing a booth review on ZT knives.
It is great that there is a market for such high end and aesthetically pleasing knives, but I would much rather purchase the Sig 2022 for that price. Still, interesting to hear the technology like the brazing and adjustable lock bar. Thanks for sharing!
I have to agree with what others have said, I would rather purchase 2 benchmades or 3 spydercos instead of some of these ZT knives. I don't even really find the ZT's that aesthetically pleasing, they look so bulky I would probably never carry one in my pocket. If guys want to buy these as collector items for the "2nd type of cool" I could somewhat understand that particular argument, but when a knife starts approaching 500+ dollars, I would personally rather have another glock or AK variant.
Heavy pilot ... School bus of the air! Meh nice knifes none the less, and I have a 200 dollar SOG that was the peak for a EDC to me, but each thier own. (tanto auto)
And they are selling them, prob cant keep them in, so sell! made in USA all for it.
nice review, you show the product with good info, the 599 one whats the wieght? if its not 3 OZ or less not worth it
@shawn4201111 I do understand the value of a high end blade with top materials and construction. I also greater understand value vs practicality and for me, I absolutely refuse to spend anything north of 200 on a blade simply due to the fact that the blades I have that cost 30-50 dollars can just as easily cut through the top of a bag of french fries. There gets to be a point in knife purchasing where the the price starts to be outrageous. It's not a linear graph in terms of price/practicality.
@FFJabarr mine can hold an edge for 3 days because of the steel (cpm-m4) and it has a very good heat treat and ive had a tenacious and the lock failed while i was cutting 550 cord and i got cut very badly about 100 stitches
@shawn4201111 Well I've put adequate use on my tenacious and its been sharp for 5 days. There is definately wear on the edge, but its still hair cutting sharp.
How did the lock fail when you were cutting the 550 cord? I'm not trying to poke fun or anything, just curious to know. I couldn't imagine the lock failing from that. Maybe you had a faulty blade?
@FFJabarr no not the lock the scale cracked and the blade popped off the pivot idk how that happened and when i said 3 days i meant use to the point that its borderline abuse
Some of the stainless steel seems like a durable metal to have on a carry knife. Nutnfancy I have a question for you. I've been wanting to get a nice knife with a sizable blade to carry on the job. But as far as knifes go I'm lost. Do you have any good recommendations on folding knife with a solid blade with great grips. Thank you. Continue the good work.
@superstreetdogg You have been rejected by TNP Nation. Now you can use all your new free time to learn how to type. -Lt Col Nutnfancy, the guy who dropped you into the fight in the first place and covered your ass from the air...you're welcome
@nutnfancy In regards to "superstreetdogg". Just sounds like some nube with a chip on his shoulder. Any real soldier comes to realize that we are all parts of the same team and all working towards the same goals. Loved your response, well said and profesional. Good job on the reviews, even if many of the items are way above my pay grade (E-6). Also, thanks for the lift and the air cover.
Will u please give us a top 10 best folders to carry as an LEO and EDC please for under $150. Again, keep up the awesome vids. Saw u and doodle at shot but u looked busy so did not want to bother u. Arizona LEO
hey bud . long time sub .... i wish i could do a vid response to this . too much for text ... point being thees knives are way too expensive . obviously not to the rich man . but i.m broke so i.m cheap . could not imagine spending so much . my letherman wave is 60 buck . i think thats expensive worth every penny but still expensive
@305dade8a Yep good comment. I will say that I don't own any ZT knives. Like you I am pretty happy with the lower priced blades that deliver tremendous value. They are over priced for what you get usually but some guys like that.
@305dade8a Yep good comment. I will say that I don't own any ZT knives. Like you I am pretty happy with the lower priced blades that deliver tremendous value. They are over priced for what you get usually but some guys like that.
@nutnfancy thanks for the reply . i really like your vids ..... see how i copied and pasted i think you tube should do this for me . right ?
@nutnfancy well then for what price should they be sold at?? you sell your spyderco persistence for 130$! yes it takes time to make those but so do the ZT knives. i think 200$ is even cheap for the Hinderer knife.
@nutnfancy i ahve to check out your reviews of those...but already I can see too heavy! but, if one was to consider the expensive cousin, strider, how do they stack up? and is the strider warrantee worth the paycheck???
My heart skipped a beat on the last one there... I was scared it was some $1200 knife.
MSRP of $599!!!??? It seems like a lot but it's within reach if you really want it. That's honestly an awesome price for what that is, just throwing out my personal opinion. I'm sure the street price will be HIGHER due to demand, but regardless, something like that under 1k is pretty amazing to me.
Purely opinion and preference here, but to me this video is full of ugly and crazy expensive knives. Oh well, as long as I can't afford it, I'm happier if I don't want one.
@vampire847 I'm pretty sure there's no such thing as a flipper lock back. How would that even work? The lock bar would be in the way of the flipper. Not possible.
Wow, I was not a fan of these knives. Yes they might be good knives... but with their prices are a out of hand here. I love it when you go after them, "This knife is a boat anchor." Good. Feet to the fire. I wasn't impressed. SORRY. it is what it is.
Sometimes I lug around a $30 Buck knife with bottle opener and I BEAT ON THAT KNIFE. Still rocks. If I drop it I don't shriek in fear. Good things may cost, but your average joe can't afford these outrageous prices. Ah well. Thanks for posting!
@Konban9vikar no kidding, dude. they announced that echelon at shot last year and it's nowhere to be found. the other us-made stuff, is really hard to find. talked to a dealer at a recent gun/knife show who said that he was having a hard time getting any us-made products from kershaw. hey, kershaw!! if you're listening, we want to buy your knives, but you have to put them on the shelves!
Hmmmm.....none of those move me at all really. Kershaw does make some other decent blades for sure, but these just don't do it for me.... Still a good booth review bro!
$500!!! oh my!!!:( i guess im going to cry myself to sleep tonight lmao just kidding but wow i dont have enough pennies in my piggy bank to buy that last knife
I guess people don't understand the difference between MSRP and MAPP pricing. Guess what people, nobody pays MSRP. The ZT0560, you can get it for $260.
I HAVE THE 0200ST AND THE FRAME LOCK BAR SYSTEM IS A FAIL . IF YOU TRY TO CKACK A NUT SHELL WITH THE BACK OF THE BLADE ,THE LOCK RELEASES AND ALMOST LOPS OFF THE USERS FINGERS ,AND THAT THING IS SHARP .I'M GOING TO MACHINE OUT A LOCK THAT WILL LOCK THE LOCK WITH A SPRING AUTOMATICLY .OTHER THAN THAT I LOVE IT AND CARRY IT EVERYDAY .
@scottb8907 It's especially slimy when you know the whole story, it was deliberately copied for vindictive, petty, and ridiculous reasons. No microtechs for me!
Yo Nutnfancy.... Head on over to the Condor knife and tool booth.... I bought a condor Parang last year and its a freakin unbelievable chopping machine... Total value that you should find very appealing... Go check out something called a Boomslang and see if it doesnt strike your Fancy....pun intended.
Why does everyone want something for nothing? These are some of the best production knives ever made, just because they're priced high does not make them over priced. Want a BMW or a Kia? I'll take the BMW even if I have to buy it used and live off Ramon noodles for a year.
Next year could you give some exposure to smaller, more elite brands. I have a Les Baer pistol and it's godly, he had a booth at SHOT but he gets limited exposure. GO TNP!
MMMM, love me some ZT knives. They may be big and pricey but they ain't kidding on the hard use. Hold one, before you think otherwise. ZT 0350 and 0550. Oh, and not to go against anyone, I mean we all like I knives here! I'm only like 150 lbs, I can carry either of those knives no problem! But hey, to each their own. Too bad Spyderco wasn't letting people take pictures of the prototype knives =/
Sweet Looking blades. The zero tolerance 3x7. blade looks sharp, but for $599 msrp its no working mans blade. In hard use do you believe that blade would break at the weld ?
Three years ago, nutn and Sootch00 we're the ones that turned me on to the ZT lineup. Because of them, I bought my first high quality knife: a ZT0350. Now I'm pretty pissed off, because of all the models, that's the one that nutn skipped over!!!!
i was excited for this video because i hadn't really looked at zt knives until i realized the minimum you get get them for is like 200 dollars great vid though
These knives look great, but other than the $100-$150, maybe even $200 blades are fantastic. Anything higher than that, and I don't want to use it, which then ruins the fact that it is made out of such fantastic materials. Depressing. The most I'd ever spend money on is an Emerson.
Good review, thank you for posting it. I have had a bad experience with the customer support of ZT. Called twice, left message, no answer or call back...Unfortunately I got burn buying the 0300 that 'skipped' QC. Also, they started with saying that their main market is LE/Military - and they keep saying that- ...but I don't see a E3-E4 type spending $300 for a knife (knifenuts excluded!). And ZT line keeps pushing out high end (highly priced) products.
i like the ZTs. yeah they are pricey but you get what you pay for. yes, they are "heavy" but i carry a 5oz. knife every day and dont mind. if 5oz really bothers you that much then idk how you can carry a gun.
Love the ZT knives I hope at some point they will actually make some knives so I can buy one.
Nebulax123 12 hours ago
Good vid, Nutn. I love ZT knives. I have 3, one of which is the 0100 fixed blade with that huge, bulky sheath.For the record, you're 100% right about that sheath. If they offered a kydex alternative I'd buy it in a heartbeat but the knife itself is loaded with awesome. I classify these knives as emergency equipment and I want to know the knife can take whatever I throw at it. ZT knives are built like tanks. Seriously, they're panzerized!
muzzlebreak 3 days ago
ZT knives are worth every penny and their collaborations with custom knife makers not to mention there top notch quality make them probably the best production knives out there. You can buy your cheap spydercos but they will never hold up to the use that ZT knives can easily handle on a bad day.
nosaj03 4 days ago
i dont think ZT knives are over priced at all, I have a 0301 that is a beast of a knife people bitch and complain about cheaper knives that they have to constantly sharpen and take care off because they dont want to shell out the extra bucks for better steel and lockup.
SuperBlockster 1 week ago
@SuperBlockster Yeah they're great knives, but you can get knives with similar materials and quality control for usually MUCH cheaper
mathnerdm 5 days ago
hey nutn! you never got back to my email about how I can donate to the TNP! but I was wondering if you know whether or not if we can put that clip that is on the ZT 560 on the ZT 550 cause I like the deep carry clip much better!
bobabarcafe 1 week ago
The 777 is sharp! Me likey
bobrunner06 2 weeks ago
NOOOO....you skipped the 0350!
BgOutdoorsSurvival 2 weeks ago
hey nutn, what are your thoughts on the new kershaw cryo. personally I'm very excited!!!
jvod247 2 weeks ago
Hey Nutn', did you do an inverview at the Spyderco booth this year? If yes, I'm looking forward to seeing it!
noobslaya111 3 weeks ago
good job jim,nice vid
78maxpain 3 weeks ago
Best of the best
KOFFEY619 3 weeks ago
I'm speechless .
PohjolaGaming 3 weeks ago
Love that first Rick Hinderer design, I am actually drooling over it but it's too expensive so I'll never own it. I can buy a gun for the price of these ZT knives especially the 777, holy cow 600 bones for a knife, no way. I own a couple $150 dollar knives and I barely get more enjoyment out of them than my delica and endura knives. Also I agree with Nutn about those sheaths shown in the video.
whispers221 4 weeks ago
@whispers221 This. I agree, way too expensive for me, but, if I could afford it, I would buy that 777 (sooooo sexy). And that one sheath... I was digging that knife up until he showed the sheath. If they made it cleaner, with holes for attaching it to molle or use with paracord (like some of their other kydex sheaths), then I would definitely consider buying that knife. With that overly massive and bulky sheath, I would never buy it. That's just my opinion.
destroyka777 2 weeks ago in playlist More videos from nutnfancy
I'll sell my Lone Wolf T2 for purchase that ZT 0560!
shaokem 1 month ago
Cool knifes, not really feeling them. I think I liked the second one but not for $150+.
dutchmanjd 1 month ago
I agree with dade, there the ones we 'look' at but there never gonna be in my pocket. Plenty of other bargain blades that can get the same job done(Kershaw). Definitely a second type of cool knife, but way out of my league and price range
ulfanmxpx 1 month ago
0301 is my edc. want to carry the 0100 on my chest but the stupid sheeth turnes me off. or else it would be on its way. 777 is lame looking to girly.
its0the0water 1 month ago
Pleeeeeeaaaaaaase bring back the ZT302. pleasepleasepleaseplease.
Almightyrastus 1 month ago
This has been flagged as spam show
I don't like Jim ... he's not real! To much of a salesman ... sorry bro!
But awesome knifes though ...
BulletCastDuo 1 month ago
Comment removed
BulletCastDuo 1 month ago
I need an 0560/0561, but I hate the freakin pocket clips lol.
ibesteadymobbin92 1 month ago
@skyhop $480 on blade hq if you pre ordered it
ibesteadymobbin92 1 month ago
For those that want and can afford knives like that more power to you.
GUNSMITH44 1 month ago
There's a difference between feedback and just being rude.
sherman614 1 month ago 4
I honestly dont understand how people can hate a knife for being expensive! This knife was the overall knife of the year it is incredible! You get what you pay for every single time
pinnaclesucks 1 month ago
I've got a 0550, and I was very hesitant to buy it at first because I had heard several negative things about it, but after I finally got one, I love it. It is built like a tank and everything about it is perfection. Thanks for the awesome review brother! Loved every second of it. Can't wait to get my 0560 and 0777.
BTW* The nylon sheath for that one knife... yea. WAY too gauky
TheBigbrad75 1 month ago
Love it NutN, long time sub, and I appreciate everything you're doing for the project. I.E. traveling to SHOT to get us all the inside info on the new stuff! Love it!
xXPlanetEclipseXx 1 month ago
Talk about being fucked in the wallet.
im1greatman 1 month ago
I loved that knife!!!! Until I heard $599... :(
Jgiles95 1 month ago 3
Great review on ZT knives. I like the ZT line of knives for my EDC is the 0400ST. It is slighty heavy but very well built and I have 0170 as well. I like the little boot knife for that was a second kind of cool to me. Nutn, this was a great review and thanks for doing a booth review on ZT knives.
xtremearmor 1 month ago
It is great that there is a market for such high end and aesthetically pleasing knives, but I would much rather purchase the Sig 2022 for that price. Still, interesting to hear the technology like the brazing and adjustable lock bar. Thanks for sharing!
ArmedVegan 1 month ago
Only a TNP'r would design a folder with a "sculpted Titanium Backspacer."
vassal11 1 month ago
I have to agree with what others have said, I would rather purchase 2 benchmades or 3 spydercos instead of some of these ZT knives. I don't even really find the ZT's that aesthetically pleasing, they look so bulky I would probably never carry one in my pocket. If guys want to buy these as collector items for the "2nd type of cool" I could somewhat understand that particular argument, but when a knife starts approaching 500+ dollars, I would personally rather have another glock or AK variant.
ChristopherWalkenPUA 1 month ago
great knives but to rich for my blood :(
Loneman01X 1 month ago
599 msrp....for a folding knife.....I bought my damn springfield emp for less than that.
1911GreaterThanALL 1 month ago
Heavy pilot ... School bus of the air! Meh nice knifes none the less, and I have a 200 dollar SOG that was the peak for a EDC to me, but each thier own. (tanto auto)
And they are selling them, prob cant keep them in, so sell! made in USA all for it.
nice review, you show the product with good info, the 599 one whats the wieght? if its not 3 OZ or less not worth it
jakeMTSU 1 month ago
312 dollars? Fuck off. I just bought a Cold Steel Voyager and a Spyderco Tenacious for 100 bucks. Gimme a break.
FFJabarr 1 month ago
@FFJabarr they are very cheap steel if your not a knife nut you wont understand the value of a high end blade
shawn4201111 1 month ago
@shawn4201111 I do understand the value of a high end blade with top materials and construction. I also greater understand value vs practicality and for me, I absolutely refuse to spend anything north of 200 on a blade simply due to the fact that the blades I have that cost 30-50 dollars can just as easily cut through the top of a bag of french fries. There gets to be a point in knife purchasing where the the price starts to be outrageous. It's not a linear graph in terms of price/practicality.
FFJabarr 1 month ago
@FFJabarr 400 dollars isnt outrageous ive seen and owned blades that are well over 1000 but i got them for doing a lot of g10 work
shawn4201111 1 month ago
@shawn4201111 What can your blade of 1000 dollars do that my Spyderco Tenacious valued at around 40-50 (where I'm from) can't do?
FFJabarr 1 month ago
@FFJabarr mine can hold an edge for 3 days because of the steel (cpm-m4) and it has a very good heat treat and ive had a tenacious and the lock failed while i was cutting 550 cord and i got cut very badly about 100 stitches
shawn4201111 1 month ago
@shawn4201111 Well I've put adequate use on my tenacious and its been sharp for 5 days. There is definately wear on the edge, but its still hair cutting sharp.
How did the lock fail when you were cutting the 550 cord? I'm not trying to poke fun or anything, just curious to know. I couldn't imagine the lock failing from that. Maybe you had a faulty blade?
FFJabarr 1 month ago
@FFJabarr no not the lock the scale cracked and the blade popped off the pivot idk how that happened and when i said 3 days i meant use to the point that its borderline abuse
shawn4201111 1 month ago
I just started lauging when he said it was made for the M4.
pontiacmaniac2 1 month ago
dude I LOVE your review form knife keep it up man
youOSAMAtube 1 month ago
Some of the stainless steel seems like a durable metal to have on a carry knife. Nutnfancy I have a question for you. I've been wanting to get a nice knife with a sizable blade to carry on the job. But as far as knifes go I'm lost. Do you have any good recommendations on folding knife with a solid blade with great grips. Thank you. Continue the good work.
chrisrusso100 1 month ago
Great blades
welshmatty121 1 month ago
$599 not really surprised Damascus steel and carbon fiber handle go figure
kingofthecoolcats 1 month ago
Could buy a microtech for the price of the last knife, maybe I'm just biased because I don't like liner/frame lock knives.
c0c0asauce 1 month ago
Comment removed
c0c0asauce 1 month ago
@superstreetdogg You have been rejected by TNP Nation. Now you can use all your new free time to learn how to type. -Lt Col Nutnfancy, the guy who dropped you into the fight in the first place and covered your ass from the air...you're welcome
nutnfancy 1 month ago
@nutnfancy In regards to "superstreetdogg". Just sounds like some nube with a chip on his shoulder. Any real soldier comes to realize that we are all parts of the same team and all working towards the same goals. Loved your response, well said and profesional. Good job on the reviews, even if many of the items are way above my pay grade (E-6). Also, thanks for the lift and the air cover.
deputydog12 2 weeks ago
@superstreetdogg lol, looks like someone has a major attitude problem : )
acrocanthosaurus4 1 month ago
Good booth review
MrMike2blu 1 month ago
Will u please give us a top 10 best folders to carry as an LEO and EDC please for under $150. Again, keep up the awesome vids. Saw u and doodle at shot but u looked busy so did not want to bother u. Arizona LEO
LOMROB 1 month ago
hey bud . long time sub .... i wish i could do a vid response to this . too much for text ... point being thees knives are way too expensive . obviously not to the rich man . but i.m broke so i.m cheap . could not imagine spending so much . my letherman wave is 60 buck . i think thats expensive worth every penny but still expensive
305dade8a 1 month ago 9
@305dade8a Yep good comment. I will say that I don't own any ZT knives. Like you I am pretty happy with the lower priced blades that deliver tremendous value. They are over priced for what you get usually but some guys like that.
nutnfancy 1 month ago 7
This has been flagged as spam show
@305dade8a Yep good comment. I will say that I don't own any ZT knives. Like you I am pretty happy with the lower priced blades that deliver tremendous value. They are over priced for what you get usually but some guys like that.
@nutnfancy thanks for the reply . i really like your vids ..... see how i copied and pasted i think you tube should do this for me . right ?
305dade8a 1 month ago
@nutnfancy well then for what price should they be sold at?? you sell your spyderco persistence for 130$! yes it takes time to make those but so do the ZT knives. i think 200$ is even cheap for the Hinderer knife.
cschmiedlechner 2 weeks ago
Comment removed
maczuka 1 week ago
@nutnfancy i ahve to check out your reviews of those...but already I can see too heavy! but, if one was to consider the expensive cousin, strider, how do they stack up? and is the strider warrantee worth the paycheck???
maczuka 1 week ago
@305dade8a Im with you man. i aint got the money to throw around
cbatchelor99 1 month ago
This has been flagged as spam show
reply to ; @305dade8a Im with you man. i aint got the money to throw around
@cbatchelor99 yeah i wish i had coin$ like that ...
see how i copied and pasted i think you tube should do this for me . right ?
305dade8a 1 month ago
This has been flagged as spam show
@305dade8a see how i copied and pasted i think you tube should do this for me . right ?
305dade8a 1 month ago
Like how he takes the criticism. You mean gimping!!!? Nice blades!! That CF (last blade) cost more than my 2011 truck payment!! Damn!
02GMCdmax 1 month ago
no 350 info????
jasondmaguire 1 month ago in playlist More videos from nutnfancy
I've been waiting for this video! As a TNPer and as a ZT knives enthusiast. Thanks!
giupio88 1 month ago
@giupio88 p.s.: I'd like to see something more about the 0750 talon knife; that kind of blade shape is quite effective in my opinion.
giupio88 1 month ago
Simply outstanding!
Paintbl99 1 month ago
*CAMERA SHAKE*
BestTits 1 month ago
handle for the 777? looks awesome!!!
I can tell it's going to blow the bank
and the price is fair for what it is, still ouch lol D:
social3ngin33rin 1 month ago
As soon as he said $325 for a pocket knife I stopped watching. Just couldn't continue....
macdiesel78 1 month ago 2
"speak loud bro" lol
squanto9328 1 month ago
No Z350 I vas sure you would like that blade because for $130 you get a great S30v ZT EDC knife
razor12516 1 month ago
Laureen @2:57 lol
KenpoNewsome 1 month ago
My heart skipped a beat on the last one there... I was scared it was some $1200 knife.
MSRP of $599!!!??? It seems like a lot but it's within reach if you really want it. That's honestly an awesome price for what that is, just throwing out my personal opinion. I'm sure the street price will be HIGHER due to demand, but regardless, something like that under 1k is pretty amazing to me.
skyhop 1 month ago
kydex sheaths all the way
NJMevec2 1 month ago
Totally, dude?
OtisTbone99 1 month ago
Sheesh...sell your firstborn and buy a knife. Ouch!
TsugaC 1 month ago
Purely opinion and preference here, but to me this video is full of ugly and crazy expensive knives. Oh well, as long as I can't afford it, I'm happier if I don't want one.
sanctoclaro 1 month ago
i dig a sculpted butt lol
koolbeans85 1 month ago
I absolutely love the pocket clip on the 777.
tamaleaga10 1 month ago
I did not like that last knifes handle... they need a way to make a flipper LOCK BACK... I am not a big fan of liner locks... HATE frame locks
vampire847 1 month ago
@vampire847 I'm pretty sure there's no such thing as a flipper lock back. How would that even work? The lock bar would be in the way of the flipper. Not possible.
tamaleaga10 1 month ago
@tamaleaga10 I know... it sucks...
vampire847 1 month ago
@superstreetdogg Awesome comment!!!
sasquatch446 1 month ago
Wow, I was not a fan of these knives. Yes they might be good knives... but with their prices are a out of hand here. I love it when you go after them, "This knife is a boat anchor." Good. Feet to the fire. I wasn't impressed. SORRY. it is what it is.
Sometimes I lug around a $30 Buck knife with bottle opener and I BEAT ON THAT KNIFE. Still rocks. If I drop it I don't shriek in fear. Good things may cost, but your average joe can't afford these outrageous prices. Ah well. Thanks for posting!
runngunr21 1 month ago
@superstreetdogg how is he rude you stupid person
acrocanthosaurus4 1 month ago
You should have asked where is the 0780 along with all the Kershaws we saw in 2011?
Konban9vikar 1 month ago
@Konban9vikar no kidding, dude. they announced that echelon at shot last year and it's nowhere to be found. the other us-made stuff, is really hard to find. talked to a dealer at a recent gun/knife show who said that he was having a hard time getting any us-made products from kershaw. hey, kershaw!! if you're listening, we want to buy your knives, but you have to put them on the shelves!
freddieb3003 1 month ago
"Nice gimping on the butt."
Oh that came out wrong!
redmunkee 1 month ago
Hmmmm.....none of those move me at all really. Kershaw does make some other decent blades for sure, but these just don't do it for me.... Still a good booth review bro!
74Hobbes 1 month ago
Kydex instead of Nylon sheath please. :-)
curlyfry562 1 month ago
I can't imagine paying gun prices for a knife...No friggin way
salembadass 1 month ago 2
$500!!! oh my!!!:( i guess im going to cry myself to sleep tonight lmao just kidding but wow i dont have enough pennies in my piggy bank to buy that last knife
Colombiano671 1 month ago
I feel like I wouldn't use the Triple7's adjustable lock up but I do love that blade.
DavidTanisDreams 1 month ago
I guess people don't understand the difference between MSRP and MAPP pricing. Guess what people, nobody pays MSRP. The ZT0560, you can get it for $260.
xXxEagleScouterxXx 1 month ago
WOW those are some good looking blades!
I wanted that one knife until I saw the sheath. Give me the kydex sheath and I will buy it!
TheSeventhArtist 1 month ago
My pants are wet after looking at the Tripple 7.
sarinhighwind 1 month ago
I HAVE THE 0200ST AND THE FRAME LOCK BAR SYSTEM IS A FAIL . IF YOU TRY TO CKACK A NUT SHELL WITH THE BACK OF THE BLADE ,THE LOCK RELEASES AND ALMOST LOPS OFF THE USERS FINGERS ,AND THAT THING IS SHARP .I'M GOING TO MACHINE OUT A LOCK THAT WILL LOCK THE LOCK WITH A SPRING AUTOMATICLY .OTHER THAN THAT I LOVE IT AND CARRY IT EVERYDAY .
MRDEBOBUDDY1 1 month ago
like this if you think Microtech sucks for copying the 0777 design!
scottb8907 1 month ago 27
@scottb8907 It's especially slimy when you know the whole story, it was deliberately copied for vindictive, petty, and ridiculous reasons. No microtechs for me!
sailorjosh11 1 month ago
777 WANT!
ConcealedCourier 1 month ago
Yo Nutnfancy.... Head on over to the Condor knife and tool booth.... I bought a condor Parang last year and its a freakin unbelievable chopping machine... Total value that you should find very appealing... Go check out something called a Boomslang and see if it doesnt strike your Fancy....pun intended.
rainmechanic 1 month ago in playlist More videos from nutnfancy
I have zero tolerance for the price of their knives.
topher5054 1 month ago
triple seven is triple SEXY!
aerosaaber 1 month ago
Nothing in the ZT line appeals to me. Same function is available from other manufactures at half the price.
jtr109 1 month ago
over $500 for that 777? No thank you!
$299 I will think about it.
EmperorArek 1 month ago
@EmperorArek $500 MSRP. It'll be a lot cheaper
ductape95 1 month ago
9:30 classic....what were they thinking.
steev5x5 1 month ago
The Syrians or the Europeans had one ugly baby. Too busy! Its like wearing plaid, pinstripes, and polka dots.
jgbelmont 1 month ago
Im with Nutn on that sheath!!!
a2m4m60 1 month ago in playlist More videos from nutnfancy
I'm kinda pissed that I have to watch Obama ad campaigns before Nutnfancy videos!
widgetwilco 1 month ago 15
@widgetwilco The wonderful part about that is that the Obama Campaign just provided me some more money to go and buy more guns and ammo for TNP.
nutnfancy 1 month ago 28
@nutnfancy I dont mind the ads as long as we get to see some more sweet knives too!
RWW124 1 month ago
@nutnfancy Irony at its best. Keep up the great work Nutn, and thank you.
A1C USAF
EagleEyeM4 1 month ago
@widgetwilco We get Ron Paul adds , in Nevada and thats a good..
zrili 1 month ago 3
@zrili Ditto. In Arizona lol
adamant4Christ 1 month ago
@widgetwilco Pretty much a win-win,they loose money which goes to tnp,and they won't get any voters by showing ads to tnp audience.
olhsaoagpaigfbp 1 month ago
I love my ZT they are defiantly worth the price.
flatlandersfilms 1 month ago 2
LOVE the Zero Tolerance line! Thanks again for doing SHOT 2012!!
MarkModern 1 month ago
more please!!!
SETACTICALSUPPLY 1 month ago
Why does everyone want something for nothing? These are some of the best production knives ever made, just because they're priced high does not make them over priced. Want a BMW or a Kia? I'll take the BMW even if I have to buy it used and live off Ramon noodles for a year.
esrvdb88 1 month ago
Really excited about the 560 series. I'll wait for a ranger green handle though.
mongomondomongo 1 month ago
A price point sucks
ratlefty 1 month ago
Man that 777 is ugly!
MrSkater243 1 month ago 3
Comment removed
jgbelmont 1 month ago
Costs WAAAAY too much.
ryotaryuu 1 month ago
@ryotaryuu I saw them at the Shot Show I turned away from the opportunity to Distribute them.as I felt they are over priced.
frankgon4 1 month ago
Great knife, I'd rather spend $600 on a gun or ammo
NJskier12345 1 month ago
Prices. Suck. Less.
runtimmytimer 1 month ago
Triple7 knife or Eotech sight?
USpatriot741776 1 month ago
Next year could you give some exposure to smaller, more elite brands. I have a Les Baer pistol and it's godly, he had a booth at SHOT but he gets limited exposure. GO TNP!
MC1796 1 month ago
Dude that blows!! LMFAO
mjk2374 1 month ago
awesome...i own one of the zero tolerances. stunning blade. best knife i own.
12x 1 month ago
You need the camera shake on those prices Nutn
CitizenKNUCKLEHEAD 1 month ago 19
I have never been impressed with Zero Tolerance. The quality is good but the price is just too much for a blade, fixed or folding.
nscott2334 1 month ago
MMMM, love me some ZT knives. They may be big and pricey but they ain't kidding on the hard use. Hold one, before you think otherwise. ZT 0350 and 0550. Oh, and not to go against anyone, I mean we all like I knives here! I'm only like 150 lbs, I can carry either of those knives no problem! But hey, to each their own. Too bad Spyderco wasn't letting people take pictures of the prototype knives =/
Ninspec 1 month ago
Sweet Looking blades. The zero tolerance 3x7. blade looks sharp, but for $599 msrp its no working mans blade. In hard use do you believe that blade would break at the weld ?
millster101 1 month ago
Nice video.....Only seen one but thats big maybe.
jmmurdy 1 month ago in playlist More videos from nutnfancy
ive always wanted a Hinderer. cant wait to get ZT 561.
Proteus3000 1 month ago
damn for 600 bucks id rather get a custom blade but that folder is sexy
Proteus3000 1 month ago
Cool Review. By the way, she was HOT! LOL! Thanks guy!
zorro924 1 month ago
lol nutn told him..."WHAT!?!? that sheath blows!" hahaha
1n9a9n4 1 month ago
Hey kershaw, the pure kydex sheaths are way better! We don't need any nylon when it comes to knife sheaths.
gerberboy0100 1 month ago
$599!!! Wow I'm glad I was sitting down!
MrYACYAS 1 month ago
hey those knives were shit hot but can u do me a favor can you find out what knife did the rock use in the movie fast five i think it was a sog
makaio6241 1 month ago
Last knife make my heart beat faster...
benbenekben 1 month ago
Three years ago, nutn and Sootch00 we're the ones that turned me on to the ZT lineup. Because of them, I bought my first high quality knife: a ZT0350. Now I'm pretty pissed off, because of all the models, that's the one that nutn skipped over!!!!
Great review anyway.
evildude109 1 month ago
i was excited for this video because i hadn't really looked at zt knives until i realized the minimum you get get them for is like 200 dollars great vid though
rapdog90 1 month ago
Perhaps we will see a budget 777 in the future. The Kershaw Cryo is similar to the 0550/0561.
xCaffieneJunkyx 1 month ago
I am buying a ZT this year, they are beautiful :)
cschmiedlechner 1 month ago
OH well, i was happy though i saw Zero Tolerance, Thanke for going :) Love your vids!
cschmiedlechner 1 month ago
These knives look great, but other than the $100-$150, maybe even $200 blades are fantastic. Anything higher than that, and I don't want to use it, which then ruins the fact that it is made out of such fantastic materials. Depressing. The most I'd ever spend money on is an Emerson.
gun00b 1 month ago
I have never heard you sound so tired...SHOT kills.
wtsimpson7 1 month ago
is tacticle doodle your son?????
MrHoiDude 1 month ago
spyderco booth
MrHoiDude 1 month ago
PFI always looks so bored.....
neolexington 1 month ago
Comment removed
661yodaddy 1 month ago in playlist More videos from nutnfancy
Good review, thank you for posting it. I have had a bad experience with the customer support of ZT. Called twice, left message, no answer or call back...Unfortunately I got burn buying the 0300 that 'skipped' QC. Also, they started with saying that their main market is LE/Military - and they keep saying that- ...but I don't see a E3-E4 type spending $300 for a knife (knifenuts excluded!). And ZT line keeps pushing out high end (highly priced) products.
10Lav 1 month ago
the nylon sheath is ugly and just looks cheap, if you put a +100$ knife in a crappy sheath it says a lot about you as a person.
barehandedbearhunter 1 month ago
i like the ZTs. yeah they are pricey but you get what you pay for. yes, they are "heavy" but i carry a 5oz. knife every day and dont mind. if 5oz really bothers you that much then idk how you can carry a gun.
smcombs100 1 month ago
12:20- 12:24 hahahahahhaha I KNEW IT!!!
Privat3Kag3 1 month ago
Big zt fan loved this vid more knife vids love it
welshmatty121 1 month ago
I will never spend more than $100 on a knife it is a complete waste of money
johnnyboy922 1 month ago
No video description.... Who are you, & What have you done with Nutnfancy...
Privat3Kag3 1 month ago
This comment has received too many negative votes show
EWW now i can see why she dont want to be on camera...Shes fuckin ugly as fuck
devilrobrob 1 month ago
where at in the video??
xxfroobxx 1 month ago
Must confess I didn't reach the end of this vid, not a fan of ZT's.. They're just chunky, funky and very pricey!!
Smith28Adventure 1 month ago