Slash 4x4 on Mamba 2200kv 6s Lipo

[1c3b3ar]

where'd you find a 40t spur? been looking around for something smaller than 50t but without success :(

[ryry1153]

bs i got my 4x4 up to 100 with a 3s and street tires also i used my moms police radar gun

[TheJnKProject]

Is a 2200kv faster than a 10000 kv mamba

[MrOswaldo15]

@TheJnKProject it better the 2200kv because it can hold up to 6s and the 10k kc cannot hold more than 3 or 4 cell i think, but the 10000 kv is faster because it has more rpm but its not that torquy..

[450hp202turbo]

i sent you some rims i need the tires removed ,

[zezo782]

freakin awsme !! XD

[whoryanp]

awesome

[P1neapple77]

damnnnnnnnn

[Abdulaziz3131]

loool

[powerking230]

shit i have beadlocks too, but no mamba or damn 2x3s lipo's lol

[lornaenaefly]

nice much power .coul i run the smae gears on 2wd

[MrOswaldo15]

@lornaenaefly yes but the power would be impossible to control it, but u could program it to 2wd vehicle, so it would be better to control..

[lacucaracha111111]

let the tires fly  XD

[GKLxKANxForever]

how do you fit the motor into the slash 4x4? any mods?

[MattJBaugh]

youtube.com/watch?v=Z_fwpfE1U1­o&feature=channel_video_title

[dtmpowerboss]

thats why you dont by beadlocks

[amgblk240sx]

Checkout my hubby's rustler 6s 2200 kv mamba monsterCheck out this video on YouTube: bigteedo1

[The150dirtbike]

i can see one thing going wrong here... YOU PUT A 6S LIPO IN IT THE NEXT THING THATS GONNA HAPPEN IS YOUL HIT A TREE AND THEN U HAVE A GAZILLION PIECES OF SLASH IN YOUR YARD

[MegaRallycar]

I heard that the mamba monster can handle up to 8-10s lipo. Over the recomended lipo

[Gfok3]

holy $#!+... you made a tire launcher!

[MrShawnp26]

best fail I've seen in a while!

[YOitsJOSH18]

Insane

[bigbeaks]

its called glue or beadlocks



[nicksourceUK]

@bigbeaks These are beadlocks.

[NoahStudios]

@nicksourceUK Wouldn't matter either way, you nailed it too hard without having all 4 planted. My Flux HP did that to a set off factory glued Big Joes because I punched it too hard while the front end was in the air. *Maybe* the beadlocks plus glue, but even then I doubt it. 6s on the MMM is just too nasty, lol.

[Etergen69]

Flux capacitor fluxxing!!! You can do it!

[Killerhamster121]

ahahaha FAIL!

[TR4351]

In the words of adam savage, "Well theres you're problem!"

[JustPlayVideos]

one tire went zoom and it was gonnnneeee

[MaTtJaNiToR]

Maybe i wont go 6s

[Modellbau173]

really nice tires!

[MrRobban1234]

UNDERPOWERED AS FUCK!

[joshuaejackson]

awesome!

[RCWinnipeg]

Awesome sub'd!

[nitrofreakmanho]

HOLY COW!

[nydrummer44]

Kool

[187kwill]

you would be lucky to get 100 . but its hella hard. you would have to lower your truck mms above the ground and foams ive hit 100 barley on 5s with a custom build dont really recomend it imo

[300winmagmaster]

man u are going to ruin ur motor's magnet! (if u keep doing it lol)

[adanali63]

this is what u get

[98Ps3lover]

holy shit

[wakjob94]

JESUS!! HAHAHAHAHA

[rb26capri]

pfff 140mph

[KASSIDYPOLLARD]

HAHAHA TO THE GUY WHO SAID 140 MPH

keep pulling your dick

[ricewad]

i will have to post a video of mine try using the 17mm hex adapters and foam 1/8 scale buggy tires with my gearing and power I should be able to hit 140mph but havent yet due to lack of room ......im running a mamba 2650 on a 6s 40c and the thing is the fastest rc ive ever had

[nicksourceUK]

@ricewad You won't hit any where near 140mph, the world speed record is 162mph. If you've tried speed calculators, they don't take in consideration resistance such as air, wind and running surface, which play a huge part in performance. You will be lucky to hit 70mph.

[cooptroop123]

@nicksourceUK it wont hit the theoretical 140mph, but itll go faster than 70, he has 6s lipo and mamba monster in a 1/10 vehicle. thats a serious power/weight ratio. if geared and set up right i would say it could hit 100

[xoxoheartbrokenoxox]

@nicksourceUK the world rcord is 200mph look it up



[ruscccpsia2010]

@ricewad I don't think that the 2650KV motor is even designed to handle 6s.

[toddnet996]

@ricewad Have you had any problems running a 6s on the Mamba 2650, I'm considering putting one in my new Nexx 8 and I want to run a 6s. I have heard of people running a 6s with no problems but Castle say you shouldn't, because the motor magnets will disintegrate.

[dcxSpartan117]

dam that thing takes its tires off faster than you could wtf is wrong with you, a 6s lipo?!! haha

[steemy2]

WOW!!!!!!

[henzythefsxguy]

was this delibarate or did you actually have that happen on 6s?!?!

[nicksourceUK]

@henzythefsxguy Actually happened on 6s lol, beadlocks aren't great for high power. Best sticking with good old glue!

[henzythefsxguy]

@nicksourceUK good ol' glue indeed!! although at low power beadlocks save you having loads of sets of wheels though... why not just put on a little bit of glue that has a remover that you could use? would make the beadlocks stronger.

[absolutsoju]

Ive always been curious to know what happens if I stick my 6s in my Slash. Now I know, lol. Belted tires FTW.

[toddnet996]

WOW! That looks familiar. Castle should make wheels to go with that motor.

[1521joe]

dude!

your got got naked!

lol...thanks for this video man.

[bogonick2]

1 of the wheels stayed on



[nicksourceUK]

@bogonick2 I'll try get all 4 next time! Hehe. :D

[douhnutz]

lol thats what i expected..

[TheCustom35]

Nice bead locks

[rb26capri]

haahaa

[kyrkbymannen]

LOL! Talk about overpowered!!!

Great video, made my day!

[xxBLKChEvY07xx]

lol ok, wasnt expecting that to happen..so hilarious...lol

[RCFANATIC1996]

Holy $@"&! thats crazy! I was planing on a mamba monster for mine. I was kind of iffy about it but now I have to get it!

[peacerob12345]

Wow. That's the funniest thing I have ever seen lmfao. Very nice bud. Have fun putting thoughs back together.

[TRBOQUIK6]

hahahahahahhahah.... That was awesome!!!! I did the same crap with my 4x4 on 6S.... retarded!!!!!

[STdemoniac]

lol :DDDD crasy power :))))

[TheOttolikesrccars]

Holy shit ! now i definetely know that i shouldn´t do that with mine lol

[happylad]

crazy stuff :\

[MattJBaugh]

Tyre goes POOF!

[Pesco420]

SWEEEET1!!!!

[martinrc1996]

not "pro"line tires anymore :)

[EndoCloudz]

new tires?? lol

[nicksourceUK]

@EndoCloudz After a good walk I managed to find them all, got them screwed back into my beadlock rims now. lol Won't be running 6s again, lol.

[EndoCloudz]

@nicksourceUK they need a solid rubber tire for doing speed runs!

[nicksourceUK]

@EndoCloudz Where do you get those from? I wasn't really doing a speedrun just messing about with my spare time. ;)

[EndoCloudz]

@nicksourceUK i dont think the have any

[rcjackasss]

@nicksourceUK nick you can get foams but there only good on tarmac

[vortex812]

@nicksourceUK just glue them on with good glue!

[revorocks123]

@EndoCloudz What about foam tires...

[EndoCloudz]

@revorocks123 nah you wont get any traction on the dirt/grass, you want a solid rubber tire with some square nubbys and its mounted on a cheap rim so once when its done you throw it out, mabe illl make one and ill poste a vid up

[revorocks123]

@EndoCloudz Oh yeah on grass foam would be useless :P

I was just saying for speed runs on the road.

[ZippoGuy100]

@nicksourceUK lol i hope not