How To: Build A Shoe Skate

[MegaHood4life]

will u please teach me how to do that

[evadzelarayan]

how long did these last you? and doesnt the metal insole bother/hurt ur foot? great video!

[wzrdgrl101]

she talks more then my teacher does in one day. after all the talking minus well just go buy some friggin rolerskates for god sake!

[ginomoriggi5620]

what do you cut the sheet medal with

[Belinkster13]

Is it possible to use a skate board wheels and the thingy to screw it on the shoe?

[cabacaCB]

not criticizing at all but i'm curious if you have these rad custom skates then why do you use other ones in your videos?

[marcosisdecent]

@cabacaCB Cuz her other skates are really expensive and are custom too. Plus these really wont hold up to the amount of power and force she does in skating. So like said above it's better to just buy a real pair of jamskates like Vanilla, Riedell, or Labeda lol

[JamSkateAddiction]

@cabacaCB Because I made these back when I was sixteen. I got tired of them.

[twicethenice]

hmmm, this is a great idea. It might catch on. You should call them rollerskates !!!!! ...oh wait

[vespass2]

good im guna try it thanks very cool

[littlemeka6]

can u make a two wheel one? like a rolerblade but only have two wheel's and not four?

[kaliki9]

if , you buy regular roller skates & take the plate & everything off those, can you use all that to build the shoe skates?

[marcosisdecent]

@kaliki9 yes thats all you need

[duiarmia]

if yo put da metal in da shoe it wont fit anymore

[obedfarley]

inline skate is possible?

$

[enjoilit]

now that's a skate shoe

[MrDjmix111]

i just wasted 7 min of my life

[joaocamilooo]

quero ver tu andar nisso porra ! hahaha

[Mitchichen]

Quit your bickering, children. It's an insult to actual gay people.

[JamSkateAddiction]

@Mitchichen Yes it is. Makes me wanna slap somebody.

[FBjakesterFB]

@Mitchichengay.

[I0ITuGI0I]

WOW! dont heat your drill bit, this is why they do dull and you need to replace them, the metal is hardened, once heated it loses it's properties and will constantly need sharpening! Mark the rubber then use a small drill bit and work your way up to the correct size.

[BrothersFilms100]

those is sme sick shoes!:D

[XxxfjftokyoxxX]

I would recommend a plastic insole instead of sheet metal for one the plastic insole you can cut it out of a $1 cutting board from any local 99 cents store and its easier to cut and also with the money you'll save from not buying the sheet metal you could buy better parts.

[ryosvet]

what i usually do when i put plates on is, Put a shoe with a plate un-volted (but with the wheels n every thing) then move around the shoe with ur feet in it until u feel comfortable with the balance.

[Jibizm]

press 7:23 and buy a pair of rollerblades / inlines.

[JamSkateAddiction]

@Jibizm UM NO!

[graeme79]

@Jibizm  so what's the hardest part about rollerblading????

tellling your parents your gay......

[Jibizm]

@graeme79 hahahah! funny, tho how can inlines be gayer than this shit? (i thought inlines was the same as rollerblading but search for "inlines edit" moron.

[graeme79]

@Jibizm because quads are where it's at..... fruit boots are fruit boots, no matter if the are Inlines or Rollerblade, they are still gay.....

[airjordan23387]

@Jibizm Rollerblades and inlines are gay!!!!!

[Jibizm]

@airjordan23387 how can you say that while watching this gayass video above? besides, you cant be anything but a butt pirate if you think this is gay. /watch?v=7C7rRw7KJUg

[jmarissa98]

@Jibizm its a fact... you can never be cool in rollerblades ROLLERSKATES ALL THE WAY!!!!!!!!!!!

[daryljc2000]

metal plate is stupid

[kenwoodlil]

Hey i want to make some skate out of some polo boots how did you cut the metal plate out?

[JamSkateAddiction]

@kenwoodlil Sawzaw. I dont know how it is spelt but that is what i used.

[SirManguydude]

@kenwoodlil I'm going to assume that the boots has a hard bottom, so you don't need a metal plate. The reason why she needed to use the plate was because of the soft rubber bottom. Without it your foot would fold uncomfortably.

[XmeisterxXx]

I'm thinking of doing this with a pair of chuck all stars for my out door skates.

[dbray1]

hey im looking to get into the whole roller skating thing, i can rollerblade extremely well and am wondering what to get for a good jam/dance skate (im new so i dont know terminology) id like to spend less than 200, what would some more advanced skates bearound that range and where would i get them? oh and im a guy if that makes a difference.

[ojemart]

@dbray1 some really good vanilla skates should do the trick for you. but your gonna have to spend more than 200 bucks. these things come already broken into, with backspin wheels. backspin wheels get a grip on anything out of the box. with vanillas, if your gonna get into jamskating, those would do the trick perfectly.

[jamarispacejamjordan]

u suld have had more details buy iht was a good vid i no how to make iht now

[1younet]

dis vid iz extremely helpful, i made sum shoe skates out my vans but theyre not as good as these!! im buyin better plate so im makin new ones, nd ima make em lyk these!! thnk yew!

[MrJamskater21]

good video i have two pair of skates im gonna take my boot off of one pair and do that. i have been wanting to

[619obbag619]

this looks preety cool but i was wondering if u could just attach 2 skateboard trucks to the shoe

[JamSkateAddiction]

@619obbag619 Some people do for vert. Just makes the trucks wider and I think heavier. Never done it myself though.

[fusche2001]

nice, I didn't know there's a metal plate that goes in the inside, is there a metal plate on the inside of all skates? thought it was just hard cardboard in there, how did you cut that metal plate?

[JamSkateAddiction]

@fusche2001 We put the metal plate in to help keep the pressure off the rubber and keep the bolts from pulling through. No there is not a metal plate inside of regular skates. It isn't needed because they are made of a harder material that the bolts cant pull through.

[JamSkateAddiction]

@fusche2001 I almost forgot we cut it with a saw zaw. 

[dorrisgurlzsister]

Do u still have ur other channel? And if so wat is it called u said it fast

[JamSkateAddiction]

@dorrisgurlzsister No I deleted it when I made this one.

[jersonvzor]

yay courtney ur posting vids again :D

[JamSkateAddiction]

Ya a whole lot will be coming soon. Very soon my new camera will be here tomorrow! :D

[V3ryM3tal]

You're awesome, thanks so much for the video. Almost got my new skate build together... I might do one of these too. Thinking about converting vans ripsaws :)

[JamSkateAddiction]

That would be sweet.

[EnlightMent]

nm I watched Riedell 711 With PowerDyne DynaPro Plate for sale and there they were...

good job

[JamSkateAddiction]

Yea I made these about 3 years ago with my dad. I took them apart last night since the plate will be sold in a few hours.

[EnlightMent]

Have u finished them? I would love to see the finished product. :)

[jackassFB]

first comment.

im goin to make mine tommorow!

[JamSkateAddiction]

Cool cool good luck.