@QualityKush I'm waiting for the 2nd gen Reti to arrive tomorrow, then I will put together a proper video lining up the 2nd gen Matrix vs the 2nd Gen Reti. I need more Stoney Subscribers! Peace
Smaller Ion Bubbler with MATRIX perc avialable NOW on ALT! Its 2.5" shorter than the standard dewaar, and has a fused base, they're asking $330 as opposed to $370 for the bigger bub. Just thought I'd holler to anyone waiting for one of these fab percs.
If you look in my channel I just uploaded a very short video of the 2nd Generation Matrix dewaar in action. If I get 10 subscribers I will upload another (longer) video of my new toy.
I just got my Matrix Dewaar from ALT, and my matrix perc looks a little small, compared to other video's i've seen of the same bubb. Did the size of the perc change int eh dewaar recently? comparing mine to the guy with the Luke wilson vs Mobius Matrix video (the reason I bought the maxtix) and his perc looks to be much taller and further up in the chamber (because its bigger).
@joewalker77 yea he did recently decrese the size of the actual percs on both the retti an the matrix...theyre the second generation ones, you should be happy ! the matrix on the older ones was unnecessarily big
@thetruth34o9 OH yeah! After testing it out last night for several hours, I am 100% happy with this thing, infact I'm now a mobius customer for life! I'm going to get reti dewaar, and even try a nano with a matrix in it. This thing is soooo sick. After taking a couple personal videos to compare to the ones online, I see it clears much better and actually bubbles thru all holes when cleared fast. THIS THING IS SIIIICK! I won't be touching my other pieces for a while
This isn't negative in any way but I'm not satisfied with "nearly numbers" could please put up some solid numbers. Your designs are unique, every body could use some fresh ideas get the other blowers thinkin' harder, this is what I like to see. Inspiration across the board.
@zhbroder You're speaking to the choir.. I wish I had a 60fps camera I could use.. slowing down 24p footage just looks so jerky... doesn't do the video justice. Thanks so much for looking!.. we're still getting our photography dialed in
watched it again and I see what your are saying... I was thinking that you could get more holes to perc just by pulling harder and not just when you pull the slide. Time to see if the local hs has one to do a water test on.
@kcjnz Think about it, when's the only time the water level gets that low to actually go through all of the holes? When you're clearing it. It doesn't diffuse it more when you're milking it, but the perc probably has no drag because it is capable of so much air flow. Regardless, this thing looks like a peyote perc on crack. I want one
@Bordondrummer Bordon...this is a great thing - if it did hit all the holes consistently it would mean that air flow was being restricted. The bottom 10% remaining free ensures me that they gave me ENOUGH holes. I love mine.
Don't have 1200 to drop on the Peyote Pillar, but holy crap am I glad I found out about this thing. Defiantly my next pick up.
ApEx1HP 1 month ago
I'm gona be an apprentice to this guy one day! Him, the guys at illa & Sov, have the most flawless welds, pieces are immaculate..
CaliforniaOceanGrown 1 month ago in playlist More videos from MobiusGlassworks
Gorgeous. Mobius glass leads the way. Just beautiful...the zero drag and stacking ability seem unmatched.
mrwilliamwonder 1 month ago
The name of this song is Dayvan Cowboy by Boards of Canada from the album "The Campfire Headphase"
listen to all of their music, it's just as good
jamesralcoon 2 months ago
beautiful!
899polo1 4 months ago
hey whats this music?
586guest2 5 months ago
What's the name of the song??
It's a nice track to get stoned to.
Gogluism 6 months ago
@QualityKush I'm waiting for the 2nd gen Reti to arrive tomorrow, then I will put together a proper video lining up the 2nd gen Matrix vs the 2nd Gen Reti. I need more Stoney Subscribers! Peace
TheDailyBaker 7 months ago
Smaller Ion Bubbler with MATRIX perc avialable NOW on ALT! Its 2.5" shorter than the standard dewaar, and has a fused base, they're asking $330 as opposed to $370 for the bigger bub. Just thought I'd holler to anyone waiting for one of these fab percs.
TheDailyBaker 7 months ago
@TheDailyBaker Any video's comparing the 2 yet? i know there not going to make the 1st gen anymore but it would be interesting to see.
QualityKush 7 months ago
If you look in my channel I just uploaded a very short video of the 2nd Generation Matrix dewaar in action. If I get 10 subscribers I will upload another (longer) video of my new toy.
TheDailyBaker 7 months ago
I just got my Matrix Dewaar from ALT, and my matrix perc looks a little small, compared to other video's i've seen of the same bubb. Did the size of the perc change int eh dewaar recently? comparing mine to the guy with the Luke wilson vs Mobius Matrix video (the reason I bought the maxtix) and his perc looks to be much taller and further up in the chamber (because its bigger).
Thoughts?
joewalker77 7 months ago
@joewalker77 yea he did recently decrese the size of the actual percs on both the retti an the matrix...theyre the second generation ones, you should be happy ! the matrix on the older ones was unnecessarily big
thetruth34o9 7 months ago
@thetruth34o9 OH yeah! After testing it out last night for several hours, I am 100% happy with this thing, infact I'm now a mobius customer for life! I'm going to get reti dewaar, and even try a nano with a matrix in it. This thing is soooo sick. After taking a couple personal videos to compare to the ones online, I see it clears much better and actually bubbles thru all holes when cleared fast. THIS THING IS SIIIICK! I won't be touching my other pieces for a while
joewalker77 7 months ago
@joewalker77 Can you post the vids joe?
nwodog 7 months ago
Im trying to get this and the reti!
QualityKush 7 months ago
This seems to stack better than the reti.
mamaloney1 8 months ago
This isn't negative in any way but I'm not satisfied with "nearly numbers" could please put up some solid numbers. Your designs are unique, every body could use some fresh ideas get the other blowers thinkin' harder, this is what I like to see. Inspiration across the board.
NaivePeopleRFunny 9 months ago
i bet its crazy expensive
zayres29 9 months ago
@zayres29 i just picked one up today for 370
teamchevymxer 9 months ago
Absolutely insane :)
highcentered9 9 months ago
i could see one of these going into a pillar style perc super nice, or even as a standalone
stemless all the way
barfdog17 10 months ago 7
Love mine!
shwacksack 10 months ago
OH MY GOD! What a great piece of glass! I wish we had some in Germany...
smoky1205 10 months ago
nice HD but get a camera with a faster framerate
zhbroder 10 months ago
@zhbroder You're speaking to the choir.. I wish I had a 60fps camera I could use.. slowing down 24p footage just looks so jerky... doesn't do the video justice. Thanks so much for looking!.. we're still getting our photography dialed in
MobiusGlassworks 10 months ago
@MobiusGlassworks Use twixtor or magic bullets.
SwagZillaaa 2 months ago in playlist More videos from MobiusGlassworks
watched it again and I see what your are saying... I was thinking that you could get more holes to perc just by pulling harder and not just when you pull the slide. Time to see if the local hs has one to do a water test on.
kcjnz 10 months ago
watch it again, harder you hit, more holes bubble, it progresses down.
kcjnz 10 months ago
@kcjnz Think about it, when's the only time the water level gets that low to actually go through all of the holes? When you're clearing it. It doesn't diffuse it more when you're milking it, but the perc probably has no drag because it is capable of so much air flow. Regardless, this thing looks like a peyote perc on crack. I want one
Bordondrummer 10 months ago
@Bordondrummer Bordon...this is a great thing - if it did hit all the holes consistently it would mean that air flow was being restricted. The bottom 10% remaining free ensures me that they gave me ENOUGH holes. I love mine.
shwacksack 10 months ago
looks good. but still only the top row of holes work and really doesnt that just make this a circ. with a bunch of holes that dont bubble below it.
dustinmoney0099 10 months ago
LEGIT. Im buying one ASAP. This is like nothing ive seen before. i have a mobius nano and its my favorite piece. Keep up the great work
SDking420 10 months ago