This method is bad. Your "new" picture will not be a perfect rectangle but a sort of parallelogram or trapezoid.
There is a particular machine that places the projector at an angle of 90 degrees to the camcorder, with a 45 degree triangular prism in between.
Besides, the timing of the frames has to be adjusted. Your "new film" will be either slightly faster or slightly slower than the original one. The sound-pitch would also be slightly effected.
@TopplingColossus I've solved this problem by projecting over and just to the side of the camcorder rather than off to the side. Also, angling the projection surface will correct the shape too. Furthermore, the captured image will have room to crop just enough to "square" it up.
Of course this means bad quality, that's why I prefer to go with the experts. Check the options at Home Movie Depot these guys really know what they do. I always found fair prices and high quality 8mm transfers there. Good luck!
"Tired of drinking water but having the water slip through your fingers?" First, find a water tight container, preferably something like a cup. Now, twist the knob to make the tap turn on. Once the cup is almost full, begin to twist the knob in the opposite direction to turn off the tap before the cup overflows. Next, lift the cup to your face, and for the final step, open your mouth and use the muscles in your oesophagus to swallow the liquid."
if you can find it there are transfer boxs, google the company Polestar film transfer. basically it's a box with 2 opening and a 90 degree mirror.. in one hole out the other. much better transfer to your digital camera
LOL a friend of myn did this technique it looked all washed out and hard to see i told him it would look like shit and he would be better off sending it off and getting it transferd to tape or disk but he insisted his way was better ,
how wrong he was and you guys that posted this are worse than him because he tryd it as an experiment were as you guys made a instructional video and posted it on the internet and you look so foolish HAHAHAHAHAHAHAHA
DO NOT, I REPEAT DO NOT transfer your film this way. HD Film transfers by Got Memories in Tempe AZ AMAZING results, if you are local in Phoenix, stop by, free sample transfers of your film vs doing it yourself off a wall ( HUGE NO NO!! )
Wow, who the eff views these videos? I'm assuming you all have money to transfer all your films made on actual film? It's called DIY idiots. Go digital if you think it's lame. Move over for when actual talent comes through and you put loads off money into shitty storytelling and useless effects. I bet a lot of you are in film school, too, right?
@Xephirox900 I do all my films on my channel that way and most are in HD. You just have to know what your doing. Also need a camera that does 24P mode, Check out some of my film transfers.
@Tombo1230 It's lame, but it works. However, eliminating the flicker is something that has been completely left out of the video. I've successfully used this method and my customers are happy. There's a difference between what's preferred and what works.
yea thats one way to get real crappy results, why spoil priceless memories doing it that way, you will get a bad bad flicker and usually a bright spot in the middle.
Terrible. If you search for gotmemories without a space on youtube, you'll see how we transfer film. Done professionally. Although 95% of the industry transfers just like you see in the video you just watched. Although they will never admit to that.
Theoretically, if you have Photoshop, a high-res scanner (of the more expensive ones), JavaScript programming skills, a lot of free time on your hand, and not too much footage to convert, there might be a way. While absurdly painstaking it should yield excellent results - better than telecine and waay better that projection.
Well either something like this or get a television studio projector and then through some complicated system get the broadcast signal to record digitally.
this is not the best way. This makes for extremely low quality video. Make sure the service you are using scans the film frame-by-frame and produces video that is 1440x1080 (4x3 progressive scan)
I have done lots of transfers this way, (Look at my channel for stuff I transfered) The best way to get rid of the flicker is try useing A HD camera at @24p, thats the way i do my films shot at 24fps. Also lower you video cameras frame rate to 15fps. That can work too. I hope this info helps you guys out.
Without being a snob about it, I've done this kind of transfer quite a bit and if you are not AT ALL picky about image quality, it works. Flickering and dim margins are bad, and even worse when using black and white, though I've never understood why. What's sad is that, as a result of this sort of transfer, people get the idea that Super8 is a crummy, flickery medium. So it's a real disservice to filmmakers.
This is NOT the way, going to see a 50% decrease in the overall original quality of your film. BTW, this is how 99% of 'professionals' transfer film. They just give a fancy sounding description
Its great to have simple idea for amateur filmmakers i guess ... but, lets nott be snobs and face it, even an amateur should respect his own work. This video is really as facilist as they can get, no matter the original qualiy of the product.
I did this transfer but got a constant flicker,I had to use a projector with a variable speed which when slowed to 93%approx the flicker disappeared(you don't notice the speed reduction).I also got better results with the camera set to manual and the white balance set with the projector image shown through a clear piece of film(the colour reproduction was much more true).
The Film came in a Cartridge, then when you sent to off for processing it came back in a reel.
There was some Cartridge super 8 reels, but you mostly saw these for schools so it could loop the film. It looked like an smaller version of the 8track just in a clear casing mostly.
how dumb would you have to be not to know this I do this with 35mm film (only works w/ b&w though since the film is mostly red and when I convert the colors it turns up blue)
Good instructions, but you forgot to note how you have to make sure your capturing camera should be set at a frame rate that doesn't create a moving moire pattern. My HD camera capure was quite visible until I found a rate that worked.
Horrible idea, you will here the Super 8mm camera projection noise on the digital tape when you record it being that it is placed right next to the digital camera. Then when you load it into the
computer and put it on dvd, the noise will be there. Great video but bad idea!!
Super 8 movies are SILENT, therefore it is obvious that when transferring the film, you would either eliminate the soundtrack or replace it with music, etc.
Look at my videos for 2 examples that used this exact technique with great success.
hahha thats the cheapest/ shittiest way to do it... wow ... -5 fucking stars for this.... hahahaha so lame.... thats if your a lazy ass and you dont care about your 8mm footage that much. haha
High end digital restoration facilities have a far more sophisticated approach. ArriScan's infrared technology records physical damage data to then use it for either automated or manual repair. I imagine It would cost dearly though. :P
I guess you'll be surprised to find that there are Blurays captured this wat. Honest to god - blurays! And not some crappy bootleg blurays but official studio releases, such as Martin Scorsese's "Good Fellas". If you observe carefully, you'll make out the fixed patterns of the projection screen.
Just plug your player into your video card. Your vid card should have AV inputs just like an SDTV. You can also use a firewire cable. Make sure you have a capture card in your PC though, or it will not work.Lastly get some software that will convert the VHS to a digital file e.g. AVI,MPEG2,MOV,MPEG4,and etc.
@apriswajaya Not true. You can go to kodak or somewhere that does digital transfers for movies that were shot on film. The only problem is that it costs money, but the bright side is that it doesn't look like a bootleg which is what this method makes your film look.
This is actually the incorrect way to transfer 8mm film to PC etc.
Projector must have variable speed control set at 20 FPS, otherwise transfer will have serious flicker. Elmo makes the best for this. (Eiki with a 5-blade shutter is best with 16mm. See 16mmtelecine selling on eBay.) The unit in this viddy is a low grade, crappy GAF from what I can see.
Camera should actually be set in front just under projector-as close as possible to screen.
@apriswajaya Best way is to buy a scaner with 35mm scanning capability like Epson V500 photo, scan the film and then combine the frames. In order to add sound conect your pc audio card to the projector
Why not just send it in to a company and scan it in full HD? Easier, better and you don't have to worry.... :)
Super8Production 1 week ago
Go to Got Memories dot com, they have videos showing you how it's done professionally
philipt75 2 weeks ago
you can transfer the same way the footage from your eye to the computer. By filming with the freakin camera...
MrZakius 2 weeks ago
wow, really!?! I'll try this RIGHT now!!! :P
erdeianett 3 weeks ago
All the responces you have tell the truth.
you can't handle the truth !
8mm16mmdoneright101z 3 weeks ago
This method is bad. Your "new" picture will not be a perfect rectangle but a sort of parallelogram or trapezoid.
There is a particular machine that places the projector at an angle of 90 degrees to the camcorder, with a 45 degree triangular prism in between.
Besides, the timing of the frames has to be adjusted. Your "new film" will be either slightly faster or slightly slower than the original one. The sound-pitch would also be slightly effected.
TopplingColossus 1 month ago
@TopplingColossus I've solved this problem by projecting over and just to the side of the camcorder rather than off to the side. Also, angling the projection surface will correct the shape too. Furthermore, the captured image will have room to crop just enough to "square" it up.
DreamingTurtle 2 weeks ago
Of course this means bad quality, that's why I prefer to go with the experts. Check the options at Home Movie Depot these guys really know what they do. I always found fair prices and high quality 8mm transfers there. Good luck!
DavidGNJS2012 1 month ago
This is an okay method but would recommend a telecine machine for better quality and less flickering
omacias4 1 month ago
How about a video on how to drink water?
"Tired of drinking water but having the water slip through your fingers?" First, find a water tight container, preferably something like a cup. Now, twist the knob to make the tap turn on. Once the cup is almost full, begin to twist the knob in the opposite direction to turn off the tap before the cup overflows. Next, lift the cup to your face, and for the final step, open your mouth and use the muscles in your oesophagus to swallow the liquid."
Chaoslava 1 month ago 6
its shit
Misigun99 1 month ago
Yeah it could work, if you want bad quality.
TheSawfan101 2 months ago
this frakin sucx
loveboatcaptainvideo 2 months ago
is this legally?
kuki758 2 months ago
use this method for low quality transfer
brmoogma 3 months ago
and i like to get butt fucked... just saying
flojoe99 3 months ago
So I madeit,
a lot of work but fun
DickJanthuis 3 months ago
what a f*cking pointless video this is an insult to filmmakers !
LonelyHitchhiker 4 months ago 3
what is the best way to reduce flicker?
triceramovieboy 4 months ago
just in case you want the worst quality possible
nicolmedia 4 months ago
its the best way to do it I have done it 100,s of times
procamvideonewswatch 4 months ago
if you can find it there are transfer boxs, google the company Polestar film transfer. basically it's a box with 2 opening and a 90 degree mirror.. in one hole out the other. much better transfer to your digital camera
previewfilms 4 months ago
Hahaha :-D
ayeram 4 months ago
LOL a friend of myn did this technique it looked all washed out and hard to see i told him it would look like shit and he would be better off sending it off and getting it transferd to tape or disk but he insisted his way was better ,
how wrong he was and you guys that posted this are worse than him because he tryd it as an experiment were as you guys made a instructional video and posted it on the internet and you look so foolish HAHAHAHAHAHAHAHA
well done one of the dumbest videos ever
zachthezombie 4 months ago
Thumbs way-the-fuck down, you cunt.
When is someone just going to make an affordable scanner with some automation for this stuff? The demand must be there.
Zebonka 5 months ago
no.
JohnCandyFanChannel 5 months ago
Cheesy
JBMoevies 6 months ago
they have an official ass channel with some shitty ass way to ghetto bootleg your old film? i'd rather watch it on the projector
MrRyanROB 6 months ago 3
This has been flagged as spam show
This is great, but how about 8mm to my computer?
oluwole_54@hotmail.com
Tenixxxx 6 months ago
Turn off auto focus, lock the iris , etc. You need to do more then hit record to get anything remotly acceptable with this method.
thedarkone2134 7 months ago
DO NOT, I REPEAT DO NOT transfer your film this way. HD Film transfers by Got Memories in Tempe AZ AMAZING results, if you are local in Phoenix, stop by, free sample transfers of your film vs doing it yourself off a wall ( HUGE NO NO!! )
gotmemories 8 months ago 2
genius
Neighborhoodbordness 8 months ago
step 5. this is fucking retarded
steezy4jeremy 8 months ago
lol Anyone watching this actually buy a projector and white screen + a HD camcorder just to do this???
1:26 Only good thing about the vid :D
OnTheREDPILL 9 months ago
This has been flagged as spam show
Wow, who the eff views these videos? I'm assuming you all have money to transfer all your films made on actual film? It's called DIY idiots. Go digital if you think it's lame. Move over for when actual talent comes through and you put loads off money into shitty storytelling and useless effects. I bet a lot of you are in film school, too, right?
HelloAnxxiety 9 months ago
Comment removed
HelloAnxxiety 9 months ago
Or, you can find companies that do an even better job at converting than this piece of shit method
Xephirox900 9 months ago
@Xephirox900 I do all my films on my channel that way and most are in HD. You just have to know what your doing. Also need a camera that does 24P mode, Check out some of my film transfers.
mycoolhomevideos 9 months ago
Fun with flicker.
shaneunplugged 9 months ago
i love the sound effects.
JuggernautJeep 9 months ago
I LOVE THIS. Really strikes a nerve with people.
Andy Kaufman would be proud!
KurtSahib 10 months ago
A finely produced Caption Obvious Productions, educational film. Good work.
Gmancrap 10 months ago
Emerging Filmmakers Program... You mean unborn filmmakers...
AnthonyMegaStardust 11 months ago
lol costs about 10 to 15 to process the film how much is a projector ?
radiocrash 11 months ago
@radiocrash i've found one for 10 bucks on local flea market ^^
orbitalchiller 7 months ago
Learn how to transfer 8mm film to your computer
OH BOY NEATO!
youll need
-a projector
-a flat white surface
-and a digital video camera
......OOOOOOH REALLY, I WONDER WHAT THE FUCK YOUR GONNA DO WITH ALL THAT YOU TECHNOLOGY GENIUSES
DrScruffy 11 months ago
wow talking about amateurism
jeanaro 11 months ago
Great information! *sarcastic*
samaeliDG23 11 months ago
I'm pretty sure anyone who is capable of using video editing and/or DVD authoring software can figure out how to film shit off a wall...
gttaman 1 year ago
Hey, BJM t-shirt!
documentaryonawasp 1 year ago
The best way to do this is using a telecine machine fitted with an 8mm Gate. The method shown here is lame, sorry but it is.
Tombo1230 1 year ago 11
@Tombo1230 Yeah it is. It is the amateur way.
pat1981lux 1 year ago
@Tombo1230
I agree wholeheartedly. It is lame. I'm glad someone said it.
ElDuffeSanchez 5 months ago
@Tombo1230 How would I go about aquiring a telecine machine & around how much are they?
jamesusillXD 4 months ago
@Tombo1230 It's lame, but it works. However, eliminating the flicker is something that has been completely left out of the video. I've successfully used this method and my customers are happy. There's a difference between what's preferred and what works.
DreamingTurtle 2 weeks ago
yea thats one way to get real crappy results, why spoil priceless memories doing it that way, you will get a bad bad flicker and usually a bright spot in the middle.
MrMikemorlock 1 year ago
is this a joke?
wosredneck 1 year ago 20
"cannot buffer video because advertisement is still loading..." really, YouTube...really? you're gonna lost a lot of fans because of that
bakonfreek 1 year ago
тупые америкосы )))))
я ржал до слёз))
prosti270684 1 year ago
so lame... what about using a modified scanned and scan the reel in HD or 2K? ;)
BlueNeon81 1 year ago 2
Terrible. If you search for gotmemories without a space on youtube, you'll see how we transfer film. Done professionally. Although 95% of the industry transfers just like you see in the video you just watched. Although they will never admit to that.
gotmemories 1 year ago
Noooooo...don't do it that way...there are better ways.
FoothillsofWyoming 1 year ago
Uh, a very important step was omitted. Threading the film into the take-up reel????
rayraypoole 1 year ago
@rayraypoole Looks like this thing threads itself
UpcomingJedi 1 year ago
What if i don't have a projector or anything like that?
barbara80s 1 year ago
@barbara80s
Theoretically, if you have Photoshop, a high-res scanner (of the more expensive ones), JavaScript programming skills, a lot of free time on your hand, and not too much footage to convert, there might be a way. While absurdly painstaking it should yield excellent results - better than telecine and waay better that projection.
wakeupfist 1 year ago
troll science.
jonascartman 1 year ago 2
Well either something like this or get a television studio projector and then through some complicated system get the broadcast signal to record digitally.
Videogamehistorian00 1 year ago
Well, it couldn't affect the quality...
Nicsho 1 year ago
this is not the best way. This makes for extremely low quality video. Make sure the service you are using scans the film frame-by-frame and produces video that is 1440x1080 (4x3 progressive scan)
chikotube 1 year ago
I have done lots of transfers this way, (Look at my channel for stuff I transfered) The best way to get rid of the flicker is try useing A HD camera at @24p, thats the way i do my films shot at 24fps. Also lower you video cameras frame rate to 15fps. That can work too. I hope this info helps you guys out.
CoolDisneylandvideos 1 year ago
Without being a snob about it, I've done this kind of transfer quite a bit and if you are not AT ALL picky about image quality, it works. Flickering and dim margins are bad, and even worse when using black and white, though I've never understood why. What's sad is that, as a result of this sort of transfer, people get the idea that Super8 is a crummy, flickery medium. So it's a real disservice to filmmakers.
wheatonna 1 year ago
This is NOT the way, going to see a 50% decrease in the overall original quality of your film. BTW, this is how 99% of 'professionals' transfer film. They just give a fancy sounding description
philipt75 1 year ago
Yet the most difficult part is to get a functioning super 8 projector!
lacricriva 1 year ago
........................
lxgrkn 1 year ago
Its great to have simple idea for amateur filmmakers i guess ... but, lets nott be snobs and face it, even an amateur should respect his own work. This video is really as facilist as they can get, no matter the original qualiy of the product.
What a stupid video.
CrissCross779 1 year ago
@CrissCross779
MAKE ONE PLEASE!!!!
rocksolid76 1 year ago
umm.. now in days we have converters to make copys to dvd from a 8mm film this is a film joke guys
dmc081 1 year ago
You need a professional quality digital telcine machine. Those home made solution looks like shit.
jerryaltman 1 year ago
LOL who still has these!?!
654ha123 1 year ago
I did this transfer but got a constant flicker,I had to use a projector with a variable speed which when slowed to 93%approx the flicker disappeared(you don't notice the speed reduction).I also got better results with the camera set to manual and the white balance set with the projector image shown through a clear piece of film(the colour reproduction was much more true).
theberries67 2 years ago
does the frame rate of the camcorder matter? Cuz I have the HV30, and you can record on standard, 24P, or 30P.
JuanitoRocks 2 years ago
makes the quality all shitty tho
34thncrenshaw 2 years ago
I thought Super 8 film came in cartridges, not reels.
RandomAnimations27 2 years ago
@RandomAnimations27 i wanna say 16mm does
ZachPape 2 years ago
Comment removed
Jackolion 2 years ago
The Film came in a Cartridge, then when you sent to off for processing it came back in a reel.
There was some Cartridge super 8 reels, but you mostly saw these for schools so it could loop the film. It looked like an smaller version of the 8track just in a clear casing mostly.
djlorenzohouston 1 year ago
how dumb would you have to be not to know this I do this with 35mm film (only works w/ b&w though since the film is mostly red and when I convert the colors it turns up blue)
Thegamer5150 2 years ago
Good instructions, but you forgot to note how you have to make sure your capturing camera should be set at a frame rate that doesn't create a moving moire pattern. My HD camera capure was quite visible until I found a rate that worked.
TheJediCharles 2 years ago
This isn't exactly how I transferred my footage. I "broke the bank" by putting the film onto DigiBeta.
Caljamscott 2 years ago
record your film being played with a camera, I thought you meant scanning the film into your computer
crbgamer 2 years ago
Not perfect, but okay!
Now, that's some loud record button that is btw...
Tressco 2 years ago
THIS IS HOW TO MAKE BOOTLEG DVD'S LOL
wilson809isback 2 years ago
remember to use a variable speed projector
to prevent image flicker, 8mm runs at 18fps and video runs at 30fps, so you need a 20fps
aprox. projector speed for you video looks fine. Good job!
cinescopefilms 2 years ago
...you're fucking kidding me.
ECWNET 2 years ago
No real need to describe all those steps... And besides.. the image would come out like hell.
RealmOfSalmon 2 years ago
Horrible idea, you will here the Super 8mm camera projection noise on the digital tape when you record it being that it is placed right next to the digital camera. Then when you load it into the
computer and put it on dvd, the noise will be there. Great video but bad idea!!
Johnnylightning93 2 years ago
You would obviously cut the audio out during the editing process.
ripripstabstab 2 years ago
Johnny, that is a limp complaint.
Super 8 movies are SILENT, therefore it is obvious that when transferring the film, you would either eliminate the soundtrack or replace it with music, etc.
Look at my videos for 2 examples that used this exact technique with great success.
TheJediCharles 2 years ago
oh ur right lol :D
Johnnylightning93 2 years ago
Comment removed
hotheye321 2 years ago
Comment removed
TheJediCharles 2 years ago
Comment removed
hotheye321 2 years ago
Thanks, Captain Redundant.
TheJediCharles 2 years ago
They're called "Fruit Frantic" and "Trouble in Fat Town."
TheJediCharles 2 years ago
@Johnnylightning93 you have a cool user name.
jack2breeze 1 year ago
lol thanks =)
Johnnylightning93 1 year ago
This is really crappy. BETTER WAYS?
erietigers91 2 years ago
You'd be better off just getting professional help...Or really learning a more credible method.
Guess I'll go research now.
SamuraiXX011 2 years ago
hahha thats the cheapest/ shittiest way to do it... wow ... -5 fucking stars for this.... hahahaha so lame.... thats if your a lazy ass and you dont care about your 8mm footage that much. haha
scotto2114 2 years ago
everything they were pressing made clicking sounds lol.people usually get those old films coverted to dvd.i never tried it.
RavishingRedheadd 2 years ago
ok.. NOT.
isaa1302 2 years ago
yaa apple are going to put a slot for those tapes in new macbook line.... lol
ferrari24680 2 years ago
Not the most advanced idea but it works to get the footage i guess
ZenGuy12 2 years ago 2
wow, with a camera. are they serious
Vyper360 2 years ago 30
@Vyper360 Well this is the cheapest way.
thorir30 1 year ago
@Vyper360 that's essentially what the big machines do, only more sophisticated
pollyboy12 1 year ago
@pollyboy12
High end digital restoration facilities have a far more sophisticated approach. ArriScan's infrared technology records physical damage data to then use it for either automated or manual repair. I imagine It would cost dearly though. :P
wakeupfist 1 year ago
@Vyper360 Exactly what i thought....
Heslepton57 1 year ago
@Vyper360
I guess you'll be surprised to find that there are Blurays captured this wat. Honest to god - blurays! And not some crappy bootleg blurays but official studio releases, such as Martin Scorsese's "Good Fellas". If you observe carefully, you'll make out the fixed patterns of the projection screen.
wakeupfist 1 year ago
can you show how to transfer a VHS film to a computer or dvd, please?
filipamd 2 years ago
get a tape deck
SamuraiXX011 2 years ago
Just plug your player into your video card. Your vid card should have AV inputs just like an SDTV. You can also use a firewire cable. Make sure you have a capture card in your PC though, or it will not work.Lastly get some software that will convert the VHS to a digital file e.g. AVI,MPEG2,MOV,MPEG4,and etc.
PearlJammer07 2 years ago
hmm, not really breaking the bank but theres no other way i guess
apriswajaya 2 years ago 16
@apriswajaya Not true. You can go to kodak or somewhere that does digital transfers for movies that were shot on film. The only problem is that it costs money, but the bright side is that it doesn't look like a bootleg which is what this method makes your film look.
MattFerroFilms 1 year ago
This is actually the incorrect way to transfer 8mm film to PC etc.
Projector must have variable speed control set at 20 FPS, otherwise transfer will have serious flicker. Elmo makes the best for this. (Eiki with a 5-blade shutter is best with 16mm. See 16mmtelecine selling on eBay.) The unit in this viddy is a low grade, crappy GAF from what I can see.
Camera should actually be set in front just under projector-as close as possible to screen.
flixvendor 1 year ago
@apriswajaya Best way is to buy a scaner with 35mm scanning capability like Epson V500 photo, scan the film and then combine the frames. In order to add sound conect your pc audio card to the projector
GRFalkonas 1 year ago
@apriswajaya
telecine?
iBradFilms 1 year ago
@apriswajaya
There is but it's absurdly tedious as it requires a lot of manual labor.
wakeupfist 1 year ago
@apriswajaya
Its called tele cine
akanathan 1 year ago
@apriswajaya there's some kind of 8mm film scanner, i've seen on ebay
orbitalchiller 7 months ago