Evike.com - RA Tech NPAS kit for WE GBB

[UsernameStillPending]

will it work fer the we ak74un?

[Vinyard46]

does it add fps too? i mean from stock

[JahDropper]

Is the NPAS worth it?

[AwokenDemon]

@JahDropper npas allows you to change the fps on your gun to meet the limits of different enviorments. when playing indoors(which limits are gennerally lower) you can lower the fps so you can play. Outdoors, you can raise it for extra range and accuracy. it depends on your preferences and where and how much you play.

[DrftrPny]

Can this valve and rod fit in a we gbb pdw bolt carrier? If so where can i order it?

[S13mASSImo]

My bolt/nozzle looks completely different. I don't get it, my agm m4 is destroyed because of npas installation and now my scar bolt looks totally different... I don't have the hole in the carrier. I do have the top hole but the bottom one isn't there...

Getting tired of this ra-tech stuff! No manuals or customer support whatsoever!

[sparta139]

Can you please make another video on how to do this with the open bolt version?

[Kaffebonden00]

Is there a video showing how to install NPAS into the WE M4 system?? Would appriciate that.

[SCCrusaders]

Does anybody know if this product can work for the King Arms Colt M4 GBBR (Open Bolt)?

[SuRv1v3R97]

On Evike.com it has two systems, one is the negative pressure air system and the other is the stainless NPAS valve system, which one should I get?

[abeepak1]

@SuRv1v3R97

Negative

Pressure

Air

System

is NPAS, otherwise go with the stainless one.

[mrkilla5091]

i wanna see this for my WE G39c !!!!!!!!

[sexyself45]

Make one about the WE G39c

[sniper6394]

will this work in the WE L85?

[DeathMark22]

There's an NPAS for open bolt rifles but is the installation the same? Or will there be a guide because i want my we m14 gbb to kick butt like crazy but not be too scary for other players.

[911airsoftdude]

how much can it lower it to

[Guerrilla109]

did he put glue on the tip of the thing at 1:40 ?

[Gabricokun]

i gotta admit, while gbbs are cool and all, the lack of magazine capacity compared to an aeg just disappoints me D:

[bf2lover42]

@Gabricokun my only problem is the price for each mag. Otherwise I don't mind the 30 round capacity.

[dj2l8b]

I am guessing this is for a closed bolt version..cus I have an open bolt kit and its nothing like that!

[dj2l8b]

at 1:06 what is he cutting and what did he do after it to get the npas inside the nozzle?

[MrTorque9]

I'm guessing this doesn't work for open bolt WE guns? Specifically a WE G36C?

[Quagmire88]

does this work with the new WE M14 GBB? not the EBR version

[thomsonelite]

I just gotten mine, and ofc without instructions :S

Does it increase or decrease the FPS, when screwing like he does in this video, I cant seem to figure it out ..

[skedgell1]

can you use this for the open bolt version? also can you use any tight bore barrel on a gbb

[desertfox1792]

If I buy my GBB Scar and this kit at evike store will they install it free of charge?

[JonasTheSniper]

What the hell's with the nice bike in the background?

[dorinzu]

Who the heck would thumbs down this???

[dorinzu]

Can someone please answer the figgin question?!!? where do you get the blue stuff and is it required?!?!

[reaperskating]

@dorinzu Chill man. Its youtube not a forum,and your answer is its blue loctite availiable at wal mart or anything like it. It just keeps the threads tighter, not required but recommended.

[chaindogNZ]

I am glad I didnt follow your instructions as the RA tech naps kit I bought had poor tolerance compared to the we bolt and has causing mis fires and bolt jambs...........sorry, I had to put the old kit back in to make my scar work!

[snipingownsu]

do you absolutely need the NPAS adjustment tool or can you use a allen wrench?

[MrKlikz]

great video... but whats the blue stuff??

[danielthesard]

@MrKlikz It is thread lock to ensure that the threaded shaft does not shake loose under the force of firing

[MrKlikz]

AWESOME-SAUCE... BUT WHATS THE BLUE STUFF?

[ZeroTwoAlpha]

anyone know where to get that blue glue stuff in the uk??

[AirsoftBackUp]

@ZeroTwoAlpha its lock tight. basically it turns into a rubber after it drys to g\keep it nice an snug

[FloChris]

this is some cool shit :D

[ftballtank97]

does this work on any we gbb gun

[ftballtank97]

does this work on all we gbb guns

[ftballtank97]

does this work on all we gbb guns

[snipingownsu]

which kit works for the WE 416?

[FloChris]

@snipingownsu the M4 kit does

[Armoredfury193]

I would also like to know what the blue stuff the guy put on the end of the rod is

[dwiwwiw]

@Armoredfury193 its thread lock

[dwiwwiw]

@Armoredfury193 its thread lock

[DivisionDelEste]

Thanks for the tutorial, all I can say is that I followed your steps and my Scar-L works perfectly with that kit. Thanks again

[hexagonsun84]

I have this kit, and the fps varies up to 100 fps. It's ridicolously unstable. How can I fix this..

[dito2942]

whats that blue stuff you put on the end of that metal rod

[richardvinc]

@dito2942 this is lock nut it's to avoid the srews to unscrew or untighten (threads glue)

[porrsmurfen]

The fucking cameraguy sucks... He's got it so closeup that you can't see shit happening outside a 5 cm radius..

[bf2142dude]

@evikecom The video makes it seem a little confusing, if we purchase this product and bring in our Scar will the Evike techs show us how to install it?

[snipingownsu]

@bf2142dude I agree it is confusing im kind of skeptical about buying it but, gotta have it to play at an op coming op

[RealCadde]

I bet if you lover the setting from max FPS you'd still get the same high FPS. This due to the fact the BB weighs the same and the barrel is rather short for a full gas load.

Using a heavier BB will give it good speed and better accuracy and range.

A longer barrel will give it higher speed but less accuracy and slightly better range. This due to unstability of the air around the spherical BB as it flies through the air having a higher effect on a light weight BB vs a heavier one.

[Rossmancer]

I don't understand. Can't you adjust the fps with the original hop up? What's the point of this?

[RealCadde]

@Rossmancer

That's not a hop up adjustment, hop up gives the BB backspin which provides lift as it flies through the air to prevent it from falling due to gravity when fired.

The adjustment gives more or less gas to the barrel so the BB gets a better acceleration before it exits the barrel thus higher FPS.

[Theloss52]

I don't want him installing mine....

[hifatpeople]

so you can't adjust the fps with just a stock nossel?

[Carlito564]

i just loved how the gun got louder during the second shooting, i got this bad boy in my WE M4 and the recoil is the same no matter how much i change the FPS

[fixcypher]

Will this work on the We HK416?

[josephgraboskyhfcs]

imagine that with co2........ well correct me if im wrong, but does it work by either increasing or reducing the seal where gas flows thus either all the gas goes to the barrel or a lot of it escapes from the seal, in turn less gas pushing the bb at a lower power, or all the gas pushing the bb for higher power?

[SJLeano]

can the RA-tech n.p.a.s for the we-tech m4 work for the we-tech h&k 416

[TheGoodSeries]

@SJLeano yeah, any we-tech gbb

[Rad24000]

@SJLeano Its the same gas system in all of the WE guns, as far as i know. If the RA-tech NPAS will work in the SCAR and the M4, I don't see why it wouldn't work in the HK416. I have a 416 myself and the internals look the same. I have no evidence to support this, so don't take my word for it, but I think it would work fine.

[EMCBE]

@SJLeano yes

[SJLeano]

can the ra-tech npas for the we-tech m4 work for the we-tech h&k 416

[SJLeano]

will the ra-tech npas for the we-tech m4 work for the we-tech hk 416

[SJLeano]

will the ra-tech npas for the we-tech m4 work for the we-tech hk 416

[SJLeano]

will the ra-tech npas for the we-tech m4 work for the we-tech hk 416

[Astalin666]

that adjust int nothing but changeing proportion betwen recoil and FPS lower ur fps u get harder recoil ( u can damage ur scar) set fps at full ( almost same seting like in stock ) ur recoil is softer my frd have that shit and he haved the same problem like guy from YT ( his stock fall apart but not on co2 but on green gas)

[TheUSMC17]

i have the we tech gbb M4 that looks adjustable,it looks like the npas system is already in it. i paid 400 for it so i would hope it is, but any1 know?

[oldwarrior09]

do you have to cut it like he does? that seems risky

[MilliMeterPeter7]

i dont think so. My guess is tou can unscrew that rode. I think he cut it to be fast, lol

[Phantomairsoftbl0ws]

What was the blue

Substance he put on

That rod

Gear grease

Thread lock

Silicone gel

[packgen]

locktite thread lock

[pyramidheadthingy]

.......................burry low........

[fury9800]

You can't unscrew the original valve off guys. I know because I have bought this kit and tried to take off the original and it can't be unscrewed off with pliers without damaging it.

[untulisc]

@fury9800 and how is the performance of a gun??? what gas r u using??? I'm thinking of buying tht kit too...

[tallandme13]

man he is rough with that gun =(

[pballa321123]

GOTTA HAVE THIS !!!! SCREW AEGS'S .

[untulisc]

@pballa321123 yep tht's y I bought WE SCAR now I'm thinking of getting this kit to increase my fps

[skynat247]

i've got to say, this is one heck of a great looking gun, and it's gas so it's got NONE of the little problems of AEG's. (AEG's HATE ME!!!, that's why i love gas) i want to get this gun for me and my team XD and i'm thinking of using you evike! although you have a bad rep with some people you've been good so far and your prices are amazing. DON'T LET ME DOWN! xD

[evbunke2]

Why did he just break off the original part? Couldn't it just be removed and saved in case it was needed again?

[MetalisntEmo]

yeah i was wondering that too...

[fury9800]

@evbunke2

The original cannot be unscrewed. I know because I have this and installed it.

[evikecom]

Evike is the gateway for many products into the USA, even to the world. Evike TV channel will reflect that.

[xxMRGRENADExx]

@evikecom how come the product he has looks different than the one on your website there is a silver piece where the black pieve is on this he just has a simple rod conected to the nozzle why is it different

[evikecom]

Imagine it a library, to make YOUR lives easier. All the manufactures in the world have jumped on board Evike TV. You will see more exciting videos coming soon.

[kullwarrior]

evike whats the point of ripping this off from RA-tech? you couldve just link it.

[SpecOpsFighter]

This is pretty much exactly how the real one is taken apart(trust me I've taken many apart in the past and used them in training exercises). Very realistic!

[FNGSniper]

good work you guys at RA tech know your shit

[RichardLameo]

Ahahahahaha ohhhhhh man... I feel like such a dick for laughing at this fellow just for attempting to speak english

[darkerik411]

cool