Added: 3 years ago
From: skidoo00
Views: 38,270
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (71)

Sign In or Sign Up now to post a comment!
  • SHIT video never seen before...........lol

  • i have a mini motorcycle with a weedwacker engine and i put the same fuel in it with some 2 stroke..... it seems like it has less torque and i have to adjust the choke the faster i go, but once it gets going, it GETS GOING

  • recorded with a socket wrench.

  • it sound like a really pissed off cat in the middle of hurricane Katrina.

  • u recorded this with a potatoe

  • Looks like 2 fps but nice what you did, get a better camera NOW! 2 fps with shit graphics is unacceptable

  • WOW! 6 frames per second at 240P does an amazing job at making pixels dance...

  • Put diesirl fuel in and by a camera instead of a old phone

  • no it was done with an ancient nokia cell phone hahaha

  • Jesus christ, did you record this video with a tooth brush?

  • @JDCoolMan21  No i think he took a series of pictures and added audio..

  • worst camera ive ever seen

  • Man imagine if you ranthat as the weedwhcker compleatly, you'll probobly chop down trees with a regular spool.

  • why such horrible video? ive played better nintendo games...

  • Dude.....was that camera $2.00 at Walmart?

  • @dawgdan1 LMAO!!!, Nice!!!

  • RC fuel is Nitromethane and Methyl Alcohol. I know I've flown RC since 91. Used Ritch's Brew Synthetic 15% for years and years. I know this stuff is hard on engines as I had an old gallon that we poured into a 96 F150 rental with a 351 V8 an eighth of a tank. That truck boiled the tires for three blocks through OVERDRIVE. It started surging and trying to pull through stop lights and getting hot so we pulled over and filled the tank with gas to dilute it before we blew the engine lol.

  • higher octane fuel is used for high compression engines such as aircraft engines, lower octane is used just for low compression such as small car engines or weed-whackers in this case. High octane fuels wont damage a low compression engine but a low octane fuel can do serious damage to a high performance engine due to detonation before the piston reaches top dead center due to high pressure

    Im not a geek i just love this stuff XD FUEL AND DETONATION !!!!! hehehehe

  • nitromethane fuels contain more lubricants than regular gasoline/oil mixtures and it's also faster burning than gasoline, that's why it revs like that... Also, higher octane gasoline doesn't affect engine performance, lower octane does. the term Octane is used to describe how much compression the fuel can take before it reacts.

  • haha thats awesome, didnt think 2 strokes could run of rc fuel

  • lol sounds like a tamiya

  • nitro refers to nirtomethane which is the under lying ingredient to the "nitro" fuel. alcohol is actually the secondary combustion ingredient. Then you have oils for lubrication. do you know why "nitro" is so useful in smaller engine? bc it uses less oxygen to burn more efficiently than gasoline. meaning the size of the piston can be greatly reduced and still have a reliable mixture inside. sorry... i felt like ranting and being an ass.

  • It does have Alcohol in it... Nitro methane alcohol synthetic and caster oil

  • yes i know -_-

  • @AlchemistHawk Not to mention that nitromethane is practically like having a turbo charger or nitrous. I dont think there is any alcohol in nitromethane, is there? I thought it was CH4methane(CH3) and N20(nitrous)? I dont think an alcohol, methanol/ethanol etc would work very well in a 2 stroke. Given that alcohol is polar and oil is not.

  • @AlchemistHawk Nitromethanol*

  • @andy2108  nitro fuel for rc nitro cars is made of nitro methane the same thing used in top fuel dragsters and funny cars. nitro rc car fuel or ''nitro fuel'' is not made of Alcohol.

  • @MarinePkG Actually it is. Nitro fuel for RC is in varying percentages but is mostly Methyl Alcohol and lubricants, be they dino or synthetic.

  • damn that is the same engine that they have in imports

  • hahaha true that

  • Just hook up a mixture of pure oxygen and acetylene to the intake and enjoy.

  • WTF????? dont keep reving the engine just open the fucker up and leave it at full revs if u want 2 fuck it up u idiots

  • um... im going to run my weed wacker on pure nitro no pussy %20 shit

  • You, fucking can't get real 100% nitro unless you get it from a web but, it's a hassel. -.-

  • so u can get it.... so i will

  • good luck finding 100% nitro fuel.

  • and getting it to work without exploding the engine

  • @tomcatdcn i know where i can get some...

  • he thins he can fool us with gas premixed with some nitro

  • you cant mix nitro with two stroke gas the engine wont trun over trust me iv tried puting nitro in my gas and the motor stoped running

  • when i looked at the title i knew this vid was going to be a phone video with a few dickhead kids

    get a proper camera

  • not possible i tried and wont run onit u gotta have some gas mixed with it

  • run it on pure rubbing alcohol i bet it wont live lol i did that and the damn engine blew apart well not litterly but the con rod snaped

  • lol i use 25% NM 12% oil for my savage X !

  • lol done this before. couldnt get it to blow up

  • stupid fags

  • Whys that?

  • damn dose anyone know where i can buy glow pug for to fit in standard spark plug i want to convert one in to glow

  • why?....

  • sooo no coil or wires etc and it will make the engine lighter

  • nitro is not as flammable as gas thats why they run the fuel in glow engines cause the plugs glow and not spark

  • shut the fuck up faggot

  • u kno im right ass so u stfu

  • glow is for diesel engines is it not?

  • same principle nitro engines r like 2 stroke diesel yea.

  • get a normal rc glow plug and make a adapter with a metal lathe to fit the normal spark plug thread

  • i have tried this with the model airplane fuel the weed wacker went crazy here is what was more crazy it was running with the spark pug disconected. can anyone eaplane that?

  • your engine ran without a spark because the nitro fuel ignited under the heat and compression, just like a real model plane engine. I had a weedwacker once that was so worn that it wouldnt run on gas, but it ran great on nitro.

  • i tried this once i couldnt turn it off.

  • The mixture needs the right amount of oil and the right amount of nitro that reacts with the metal elements (platinum) in the glow plug to ignite the fuel. You also need gasoline with a high octane ratio in the mix.

  • sounds like its gonna blow use this neat fuel i use works as well as 89-

    1/2 E85 with 15% nitromethane rather than 15% gas 1/2 87 octane gasoline (from BP) Do u have 2 or 4 cycle?

    if u have 2-cycle mix at 32:1 (4 ounces per gallon) im actually surprized it didnt blow up,im a hydrocarbon expert i have a uncle that works at a refinery so...ya know

  • keep it on full throtle !!!!!!!!!!

  • it was all nitro thats it, no gas, also, im positive it had more performance, never heard one twist like that

  • did u mix any oil with it??

    or the nitro contains it alredy?

  • the nitro fuel is premixed

  • @skidoo00

    it will go higher rpm without the shaft attatched lol

    im surprised it wasnt backfireing like crazy lol

    

  • looks like a nice engine 2

  • nitro needs higher compresion to ignite. so, even mixed with gas, it will actually hinder the performance of any enigine designed to run on gas. the whacker probly has 7/8:1, and a nitro rc motor has like 11/12:1

  • RC fuel is 60+% METHANOL, which will ignite in a spark-ignition engine, and that will in turn ignite the nitro in the fuel.

  • not really try urslef

  • yea, i know, the next day we ran it with strait 93 and it still wouldnt go, then on the 3rd day we ran the nitro again and it blew the exhaust off, so we burnt it haha

  • put 1oo octain gas in it and 30%....it should go then......(the nitro has oil in it witch is keepin the berings lubbepreventing it from sezing up(blowing)

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more