I have an o.s vg30 in my savage iam running a 3speed trany with reverse and rdlogics quad pipe also did you have any probs with pullstart as u were running in as I have broken mine about10-15 times I have been able to mend it but it's a pain!!!
and also i think hes running..probably a GST pipe or a totally different pipe hes probably running more of a 18/47 teeth on his im running a 47 on slipper clutch and a stock on my clutch bell mine doesnt run like this either but still mines a stock 4.1 and planning on putting os 30 on mine also i am planning on putting the 18 tooth on mine also getting a recommended tune pipe my hobby shop recommends
id say the 30VG goes more then 3HP it only gets 3HP at 28,000rpm which is what the 2 speed gives the 3 speed gives a lil more so youll get a estimate 3.3HP or more and it should pull like that if u tune it correctly also the gearing would help and i am guessing u will get an average 45-38MPH on this engine with a 2 speed a 3 speed might get max 50MPH or more
nope this is an VG-30 from OS MAX its a 100 % car engine !! lots of power at low rev range compared to other engines. look at the towerhobbies or os max website for more info.
this is a slideshow, two pics in one second.
theripper0712 1 year ago
I have an o.s vg30 in my savage iam running a 3speed trany with reverse and rdlogics quad pipe also did you have any probs with pullstart as u were running in as I have broken mine about10-15 times I have been able to mend it but it's a pain!!!
HPISAVAGEX45 2 years ago
@HPISAVAGEX45 i got an electric roto starter i hate pull starters for the reason you just mentioned.
and the rope cuts in your fingers flesh after a while. very painful after a day of tinckering.
biglift1 2 years ago
and also i think hes running..probably a GST pipe or a totally different pipe hes probably running more of a 18/47 teeth on his im running a 47 on slipper clutch and a stock on my clutch bell mine doesnt run like this either but still mines a stock 4.1 and planning on putting os 30 on mine also i am planning on putting the 18 tooth on mine also getting a recommended tune pipe my hobby shop recommends
SavageXdriver177 3 years ago
whoops i ment 45-48MPH not 45-38MPH typo
SavageXdriver177 3 years ago
id say the 30VG goes more then 3HP it only gets 3HP at 28,000rpm which is what the 2 speed gives the 3 speed gives a lil more so youll get a estimate 3.3HP or more and it should pull like that if u tune it correctly also the gearing would help and i am guessing u will get an average 45-38MPH on this engine with a 2 speed a 3 speed might get max 50MPH or more
SavageXdriver177 3 years ago
What Spur and pinion are you running tooth wise? 47T/18T ?
Crazylogie 3 years ago
ive got the same and it LOOKS like he has the 18t hooked up
slippedknot99 3 years ago
Well I have the OS30 running 47 / 18 3 speed trans and it don't go like this. What pipe is this guy running ?
Crazylogie 3 years ago
no clue
slippedknot99 3 years ago
is that an airplane engine???
denl0 4 years ago
nope this is an VG-30 from OS MAX its a 100 % car engine !! lots of power at low rev range compared to other engines. look at the towerhobbies or os max website for more info.
biglift1 4 years ago
i just asked becuz i have os engines on my airplane dident kno they made car engines
denl0 4 years ago