TT-01 RACE TUNING

[lukeyboy900]

Yes and it does work the same for rc cars...

[lukeyboy900]

Like how guys are saying to put more power into the car,did you guys know ferrari uses most of it's RnD on handling? Not power...

[supersanchez1991]

can anybody help me i have a tt01 and i upgrade to brushless motor and also the ESC, i also bought a pinion gear 24/25 t. Item #50477. but they are to big. i dont know if you have upgrade the pinion gear on your car but can you help me out and tell me which ones are the right size,thank you

[Smrtakzed]

3racing carbon chassis upgrade and some alu tunning parts, HPI wheels 9mm offset, just type in google for search tt01 upgrade parts ;-)

[RCfreak27]

0:25 ?????

[torobaby1]

what parts were bought for this unit please list down coz im gonna full mod my tt01

[hiitzmike]

@fordyrox do even have any rc exsperience at all? Learn

[fordyrox]

Did you know you could have bought a better car with all the money on hopup parts you spent. Also all you noobs goin on about the 540 motor need to know what there talkin about before they open their trap. This guy may actually get out and race this car in 540. A bigger faster motor isnt always money well spent.

[hiitzmike]

lol change the motor dude its a silvercan stock tamiya motor

[fordyrox]

@hiitzmike Dont be dissin the 540, there awesome!!

[MCLERC88]

you drive with a stock motor go bay a real motor a TZ or Yokomo

than you have more speed and you can drift easy and longer

[stuvy72]

Hi I am looking to buy a brushless motor for my tt01 d. I was looking at a 13t 3000kv.any suggestions can you please help would be grateful

[supersanchez1991]

i have the tt01 and i bought the ball bearings to replace the stock ones. but in the package there are 16 ball bearings and i was checking the PART LIST that came with the tt01 and i found the 12 (5x12) plastic bearings that i need to replace, so i have 4 ball bearings (8x12) left from the package that i bought, but in the list part i only see two, where the two ball bearings left go? please some one help me

[murcielago1997]

@supersanchez1991 i replaced the metal ones(4) as well as the metal isn't as smooth which should get rid of the remaining ball bearings you have left. hope that helps

[supersanchez1991]

hi i recently bought a tamiya tt01 but i am getting confused with the ball bearings. i want to change the ball bearings of my tt01 but i dont know which ones to get because there are alot of ball bearings. i dont know if there are different sizes, and i dont know which ones to get. please help me out. i have the tt01 NISMO Coppermix Silvia. thank you very much.

[tabbyman2009]

is that a stock motor

[fordyrox]

where did you get the turnbuckles i shreded mine :) lol and also what its the name of the song

[fordyrox]

that is one madd tt01 man i bet that flies!! what is the song called its awesome too?

[RCrulz]

Its a TT01 with 3racing hopups. check out the 3racing site youl see.

[MrMrPamp]

max.speed??????

[AlexakaAlpine]

I would say not too quick because it looks like he has the stock motor in their but it has potential to be a quick little thing.

[RCrulz]

@AlexakaAlpine

I disagree this TT-01 would be much lighter then the stock TT-01. My opinion that is

[AlexakaAlpine]

Yea, it's hard to tell. I Have a pretty much stock tt01 and my mate has a fully upgraded tt01and there isn't much in it.

[fordyrox]

@AlexakaAlpine i have a tt01 with a stock motor and it can go over 35kph easy

[RCrulz]

@MrMrPamp

30-40 kph.

[kikller]

what is the point in tuning ur car with top-notch parts when u have a stock motor?

[scousetagger94]

race in a stock class?

[timbulb]

Not very much stock on there.

[scousetagger94]

stock can tho by the looks of things

[aidan21]

@kikller ahaha i was about to say that, got to have been a few bob too.

Usless.

Buy a brushless motor next.

[tabbyman2009]

nice is that a stock motor

[CellRep]

LOL change de motor and your connecter! LOL 27T....

[Evopoper95]

I've got 2 questions:

1. I bought some drift tyres and it told me to kinda heat it, I did, but then I still can't fit the tyres to the rims. Please Help.

2. Do I have to remove everything again to fit the aluminum drive shaft?

[mikeqoo123]

heat it and step on it to fit it in

[Evopoper95]

ty =D I got it all done. Thanks

[Jakey4seasons]

1) put your tyres in boiling water for about 30 seconds and theyll soften up then they're easy to put on.

2) to change your prop-shaft you only need to take off your transmission case.

its pretty easy

if you need and more advice or help just ask me im happy to help.

[Evopoper95]

thanks dude! i got it all done! thank you very much

[d5iveproductions]

best way to do this is heat with hairdryer or heat gun till its all stretchy, you probs didn't heat enough

[aboogie123456]

you should get a cog cover for ur engine

[aboogie123456]

get new engine, way quicker

[jeramii21]

hahaha... i agree dude.. stock silver can

[aguynamedmichael]

I recommend buying the tt-01d chassis (What ive got and its awesome) First upgrades you should (if you buy stock tt-01)do are: Aluminum Shaft/Joints Aluminum Heat Sink ¤ Oil Filled Shocks ¤ Full Ball Bearings ¤ TZ or RZ Superstock motor Change Pinion/Spur combination to what you like Carbon Fibre Upper support And a decent battery (3000MaH+) always gives better results. ¤ - Means comes with TT-01D Chassis kit. Good Luck!

[stratmast3r]

what company is he carbon fibre chassis? Please reply 5/5 +favourites

nice vid!

THANKS!

[Smrtakzed]

its 3 Racing company ;-)

[rcteamorion]

cool filpje :}

[rcteamorion]

cool tt01 coollllllll music

[jimmymagnum07]

im doing up my tt-01 ive pretty much got this setup now but more with brushelss, where the f**k does the toher tie rod go????

[ds2626]

is 30/55 gear ratio very good i use 24/55 and they keep on slipping with a grreeeeeck sound

[HPIxDrift]

wat up with the DOTS.

[boricua2711]

how can make my tt-01 faster would u recamend to make it fast

[Limerick91]

1. Full ball bearing set,

2. Aluminium shaft,

3. Better tyres depending on what surface your running on.

4. Get a better ESC and Motor, the lower turn the motor is the faster it will go in general but you also need an ESC that will handle the motor. I wouldn't reccomend going brushless just yet.

5. Get lighter carbon fibre parts, shock towers etc. You could get a completely carbon fibre chassis but you would have to dissasemble the whole chassis.

6. Strap a rocket to it.

[HPIxDrift]

where can i buy those parts online. I live in Anaheim CA.

[SuperChevy446]

ebay, i live in australia but ive heard tower hobbies is good just search that on google

[boxster260]

very good car 5 star man

[jwrx7tt01]

wats a '3 racing kit'?

[SuperChevy446]

carbon fibre chassis

[sumclifton]

Wad the music pls reply

[harjunLFS]

plz reply my mind was going crazy thinking about how much that alu costs at school

[harjunLFS]

hey vig and nice car im posting a vid of mine soon look out for it loving the car

[Bottenhond]

dude... why do you run a stock motor and esc in such an upgraded chassis?xD

go brushless!!!:D

[PaganiZondaF650hp]

how much mAh does your battery have and how long can you drive with it?

[Smrtakzed]

a have 4000 mA/h so I can drive 5 minutes on one batt

[vigggggg]

really 5 minutes? I have 3600 mAh and i can drive for almost an hour

[Smrtakzed]

yes but now I have in my car brusheless lrp vector 4 turn ;-)

[vigggggg]

ohhhh now i get it hahaha thats awesome is it easy to set up in a tt-01?

[Smrtakzed]

yes its easy but tt 01 its not good for this stron engine... now I have Cyclone S Hot bodies ;-)

[Smrtakzed]

I will upload a new video in a few minutes ;-)

[vigggggg]

okay ill check it out

[Smrtakzed]

one more video yet ;-)