Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (62)

Sign In or Sign Up now to post a comment!
  • Can you uprgrade the plastic recievers to metal?

  • ok if anyone has recently bought this, how long did it take for it to get to ur house if u live on eastern time zone??????? LIKE THIS SO PPL CAN SEEEEEEEEE!!!!!!!!!!!!!!!!!!!!­!!!!

  • Fb6613 is $30 cheaper on airrattle

  • does the newest one come with a 9.6volt battery?

  • Is there a place to put a two point sling on the front? I saw the spot on the back but is there one by the front?

  • The fb6613 costs less on airrattle

  • Whats the name of the black gloves?

  • ive got a m4 s system tan version and it isnt lipo ready do you no what model it is because i want to no if i can make it compatable with a 11.1v

  • guys if you have a Q e-mail them or call.... DERP

  • Does the black one come with the battery and charger?

  • @JohnLennon28If They both come with standard wall charger & 8.4v 1100mah Nimh

  • why wont you guys answer our questions about what year the jg-f6613 enhanced is??

    Damn Bro...

  • What kind of spring does this come with? I want to it to be shooting around 360-380fps. Sorry this is probably a FAQ, thanks anyway though.

  • Does anyone know if this would fit in a 34 inch rifle bag?

  • how come the black one on the site is cheaper? f6613

  • which one is this? 2010 or 2011?......and does it have a metal flash hider??

  • @SuperJaybird22: I got the tan one because the airsoft field I'm going to is like a desert with a lot of buildings for CQB, and the other map has a lot of grass and dirt, so pick one depending on the environment

  • I noticed that there is a black gun with the same name as the desert tan one. Is the black one the f6613 in black? And why is it cheaper? Please post a video of the black version of the f6613 getting chronograph. It seems that others have my question wondering if the f6613 has a black version so if you could explain to everyone that the f6613 (black) is the same as the desert tan. Please respond 2 comments on the website page of the f6613 in black.

  • @2009ec it comes with an 8.4 volt

  • dose this gun have a thearded barrle sooo u could add like a scilencer? and if it dnt wat is a goo gun that dose for a low price and as good as this one?

  • Is the adjustable stock on the M4 metal?

  • Can't decide on either the tan or the black. Decisions, decisions... O_O

  • If I'm not mistaken the battery displayed was a 7 cell Nimh pack or 8.4v Rather than the 9.6v Stated. Was that not the right battery or is it only supplied with a 8.4V battery?

  • wut is the FPS of the gun with .20 gram

  • That music F***IN SCARED THE S*** OUTA ME!

  • @Halfslayer the battery isnt that hard to get in i have this gun its boss! I used crazyncmans battery mod and i can change my battery in 10 secs

  • What would you guys say is better the FB 6613 or the JG M4 RIS CQB cause I heard that the battery is a pain to get in the CQB.

  • The one thing that Im concerned about is the fact that the battery is in the rail system and you can see it. Wont that add some kind of problem.

  • How much is the fb6613

  • What kind of battery does the fb6613 come with

  • Does the black one have a metal body?

  • @tttts11 The FB 6613 (The Black one) is a full metal body

  • @ KingJohnnyRock down grade the spring to m110.

  • The Airsoft arena near me only allows Airsoft guns with 400 fps or below so is there any way that the gun can shoot under 400 fps

  • @legitBMW the bad news, that JG s-system body is proprietary. The good news, there is a metal replacement body. The bad news, AMS unfortunately don't carry them. The good news, I saw one for $52. The bad news, I can't tell you where. The good news, Google search can!

  • @airsoftmegastoreCOM

    I have owned this gun for a while and its great. But recently I was in a game and I fell, while the gun broke my fall. The plastic recievers didn't take it too well, (The lower one cracked and the stock fell off) and I was hoping to replace them with the Dboys full metal marines special edition recievers also sold on your site. Iv'e been wondering for a while if they fit correctly? If not, than I'll just buy a cyma m14. Thanks, hope you reply.

  • Just ordered the black version of this gun from you guys, I can't wait!

  • I have a question. How do i know im getting a 2011 edition?

  • @ kLBliTzz the Full metal S-System is Lipo ready. To be safe, use a 7.4v lipo

  • So this gun is lipo ready? Will it mess up my motor, and wear down my gears faster???

  • @ kLxBliTzz Not all. Your .20g Bb's will be affected by mild wind. Just don't go anything less than .20g

  • @airsoftmegastoreCOM Okay thanks, umm i watched this one video, and this guy had a gun that was 350-400fps and he showed a lot of bbs to use he used .20 .25 .28 .30 he was shooting at a box from 150 feet away and the .28 and .30 were dead acccuarte but do the heavier grams make the fps shorter because im thinking about getting

    0.28G GoldenBall "ProSlick" JDM-Spec Ultra Seamless Elite

  • @ kLxBliTzz you are correct. I use .25g if my aeg's are 360-400fps. But explore what works with you.

  • @airsoftmegastoreCOM so would the .20g be bad for my gun the JG M4 S-System 445 fps?

  • I just got the f66143 in the mail today, i love it, thanks airsoft megastore, i kick more ass now, I overpowered my friends magpul masada in fps, range and accuracy. The gun is really sturdy, and a perfect, realistic rate. Honestly, I have no problem installing the battery, its not that hard, and the accuracy is almost uncomparable, even with higher priced aegs.

  • @ blackcrowstudio Idk, I guess the same reason why ppl have videos of Letter presses and SCTV as their YT favorites!!??. . . . The studio guess pretty cold and these two turds have blisters on their fingers for having heavy trigger fingers.

  • why do these two turds have gloves on?...matching gloves to boot......

  • are you guys ever ganna do a shooting test on this

  • Does the tan version come with the tighbore barrel, metal hop up, etc?

  • Can I put a 9.6 volt in this? Thanks.

  • @HeardGraceshot a 7.4v Lipoly can definitely fit.

  • @airsoftmegastoreCOM Which is better, a 7.4v Lipoly or a regular 9.6v?

  • @HeardGraceshot they both have almost equal ROF. But with the lipoly, you have consistent power compared to NiMh.

  • @airsoftmegastoreCOM i was wondering whats the most recommendable bbs to use for this gun,

    for accuracy and fps the .20 swerves after 150 feet so i was thinking .23 .25 or something just which one would work best??

  • Does the F6613 have the mosfet ?

  • @rcardona8 t=174 scratch that

    

  • @rcardona8 No, only the FB6613 has the Mosfet chip.

  • I have this gun and it is amazing..good quality and preforms great

  • I watch your vids of them getting chrono, y was the tanner one way stronger then the all black one?

  • @FutureTireChanger88 watch the entire review

  • Old gun, crappy plastic receivers, good internals though...... a fair gun for a beginner, but everyone should get a metal body AEG at first.

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more