@Mtbfanro Stick your camera on a tripod, and meter a scene with stable light without the filter on the camera. Then, place the filter on the lens and meter the same scene again (making sure the light hasn't changed) and take note of the number of stops it has dropped by.
@BloatedSensations So, if you meter a scene, say, at 160th/sec shutter, and without the filter the camera is giving you a reading of f/8, stick the filter on and meter exactly the same scene again at the same shutter speed and same ISO. If you now get a reading of F/5.6, the filter is cutting one stop - F/4 and it's cutting two stops - F/2.8 and it's cutting 3 stops, etc.
While I was investigating the purchase of a Canon 5D MarkII I came across a comment from someone regarding shooting into sunlight (e.g. sunset and sunrises) They mentioned one should be using a filter to protect the CMOS to prevent damaging it when shooting In your opinion should I be using a UV filter all the time when shooting landscapes to prevent damage to the sensor? If so what type would you recommend and how much does this impact your settings on the camera?
@meltdownman1 The glass in your lens will stop almost all UV rays from hitting your sensor. I doubt enough gets through the lens to do any sort of real damage, unless you're pointing your camera directly at the noon-day sun for an extended period of time, or something. Most UV rays are stopped by plain glass.
@meltdownman1 Sunsets are far safer, as the sun is passing through miles upon miles of the Earth's atmosphere, which also blocks UV rays. If the sun is shielded by any cloud cover, or smog, there's even less UV getting through - the thicker the cloud cover or smog, the less UV. The real use of a UV filter is to prevent you from scratching the surface of your lens.
@ibo852 It's a "neutral density filter." It's used for reducing the amount of light hitting the camera's sensor, so that you can either use a wider aperture, or a slower shutter speed, or combination of both, than what would be needed to properly expose the image without the filter.
@BloatedSensations Hey man thanks its funny because when i asked this question it was just out of curiosity but later i learned shutter speeds and aperture and saw that it was too light in deed and now you've answered it for me thanks! ;)
Do you use exposure compensation to make up for any of the light lost due to the 5 stop reduction or just gain it back with your longer shutter speeds? I know some people use a combination of both.
@dcnutter exposure compensation works by changing aperture, shutter speed or ISO value while on either automatic or shutter/aperture priority mode. It is hence not possible when shooting in manual mode what karl is doing in this video as he clearly tells us that he's using a 30 sec. shutter, a 16 aperture and a 50 ISO.
hey karl.. what lens did u use for this project?
warnaks1 2 weeks ago
Karl, are you using the 'LEE' filter system? Do you only purchase Lee filters or do you mix manufacturers?
SXBPHOTOGRAPHY 1 month ago in playlist More videos from GreatPhotographyTips
it sucks that I dont live near the sea :(
SBCriss 8 months ago 2
Awesome tip. Very nicely done
john101477 9 months ago
What a great photography..... thank you for the tips.
unknownvictimful 10 months ago
Super & Thank you very much....:D
shadhinzia 11 months ago
If you do not have an ND filter can you just drop exposure compensation down instead? I have a polarizing filter.
davidorff 1 year ago
Which brand , Cokin or Lee filters? And which system P or Z?
PoppyRoxxx 1 year ago
@PoppyRoxxx has to be lee, they are the most expensive, but there's a reason why that is.....
atyl1972 11 months ago
What Canon camera is that?
smildonfatalis1 1 year ago
the last photo (the better one) was taken from a totally different angle, and ii think with a different lens.!!!!
usantacruz 1 year ago
What brand filters do you use or recommend using?
and what size are those filters? - If I get a matte box (I shoot videos too) would I be able to use with my matte box?
MichaelFrymus 1 year ago
Comment removed
MichaelFrymus 1 year ago
what is the name of the song from the intro?
geforceoc 1 year ago
trie to do the same with a 4x5 velvia sheet
diogoarold 1 year ago
...beautiful... :)
robert140377 1 year ago
omg im no bloddy millionaire... how am i supposed to afford all this filter equipment and stuff?
How about some tutorials for low budget people who only have their DSLR and tripod without fancy filters, flashes, assistants or pocket wizards?!
FaLLeNaNg3L82 1 year ago 3
@FaLLeNaNg3L82 looool you are speaking so much for me!!! :) But I'm not having a tripod yet... still on my wishlist.
AssassinKatsumi 1 year ago
@FaLLeNaNg3L82 : grad filter adapter: $5 (ebay)
ND and grad filters: 30-60$ (Hoya,Tiffen,Hitech)(adorama,ebay)-these are ofcourse not the high end ones but still are great
Remote shutter release: $ 5(ebay)
you dont need flashes a lot for landscape photograhy!
vihansetu 1 year ago
Thanks a lot
nanorockz 1 year ago
how do you calculate how many stops of light does each filter cut?
Mtbfanro 1 year ago
@Mtbfanro Stick your camera on a tripod, and meter a scene with stable light without the filter on the camera. Then, place the filter on the lens and meter the same scene again (making sure the light hasn't changed) and take note of the number of stops it has dropped by.
BloatedSensations 1 year ago
@BloatedSensations So, if you meter a scene, say, at 160th/sec shutter, and without the filter the camera is giving you a reading of f/8, stick the filter on and meter exactly the same scene again at the same shutter speed and same ISO. If you now get a reading of F/5.6, the filter is cutting one stop - F/4 and it's cutting two stops - F/2.8 and it's cutting 3 stops, etc.
BloatedSensations 1 year ago
Yet another enlightening video. Thank you, Karl.
visaviv 1 year ago 21
As usual, another great informational video. Thanks!
chuda99 1 year ago
Thank you so much again!
Don't drop the camera below you! :P
nformby 1 year ago
man, ur amazing!!!
monn1006 2 years ago
What's the difference between the 2 types of filters and when do you use one verses the other?
Thanks,
The Meltdownman
meltdownman1 2 years ago
While I was investigating the purchase of a Canon 5D MarkII I came across a comment from someone regarding shooting into sunlight (e.g. sunset and sunrises) They mentioned one should be using a filter to protect the CMOS to prevent damaging it when shooting In your opinion should I be using a UV filter all the time when shooting landscapes to prevent damage to the sensor? If so what type would you recommend and how much does this impact your settings on the camera?
TIA,
The Meltdownman
meltdownman1 2 years ago
Comment removed
BloatedSensations 1 year ago
Comment removed
BloatedSensations 1 year ago
@meltdownman1 The glass in your lens will stop almost all UV rays from hitting your sensor. I doubt enough gets through the lens to do any sort of real damage, unless you're pointing your camera directly at the noon-day sun for an extended period of time, or something. Most UV rays are stopped by plain glass.
BloatedSensations 1 year ago
@meltdownman1 Sunsets are far safer, as the sun is passing through miles upon miles of the Earth's atmosphere, which also blocks UV rays. If the sun is shielded by any cloud cover, or smog, there's even less UV getting through - the thicker the cloud cover or smog, the less UV. The real use of a UV filter is to prevent you from scratching the surface of your lens.
BloatedSensations 1 year ago
where is this place?
hejjaghetertoni 2 years ago
Once again Great Video!!
Get yourself up to the lake district(Cumbria) sir i will show you all the good places to Photograph
petermcweeny 2 years ago
I like your video and for sure your photos quite a lot. They display a great knowledge of photographic art and you explain it in great way.
I enjoy watching a lot.
Thanks
lucky2watch 2 years ago
Hello GreatPhotographyTips, could you please answer my qustion? What is that piece of glass in front of the camera and what serves it for? Thank you
ibo852 2 years ago
@ibo852 It's a "neutral density filter." It's used for reducing the amount of light hitting the camera's sensor, so that you can either use a wider aperture, or a slower shutter speed, or combination of both, than what would be needed to properly expose the image without the filter.
BloatedSensations 1 year ago
@BloatedSensations Hey man thanks its funny because when i asked this question it was just out of curiosity but later i learned shutter speeds and aperture and saw that it was too light in deed and now you've answered it for me thanks! ;)
ibo852 1 year ago
Nice one! Keep them coming!
lew1310 2 years ago
xxxx GREAT xxxxxx
fahim76uk 2 years ago
so great! love your vid.'s
zeroexcfg 2 years ago
interesting video, nice tipps and good results!
and in 1080p perfect for my full hd sreen
Neolino1708 2 years ago
i been watching your videos and they are all awesome... but was wondering if you were taking your shots in raw or jpeg to get such beautiful pictures?
i need to get some ND filters. thanks.
zerozeroKAok 2 years ago
Do you use exposure compensation to make up for any of the light lost due to the 5 stop reduction or just gain it back with your longer shutter speeds? I know some people use a combination of both.
dcnutter 2 years ago 5
@dcnutter exposure compensation works by changing aperture, shutter speed or ISO value while on either automatic or shutter/aperture priority mode. It is hence not possible when shooting in manual mode what karl is doing in this video as he clearly tells us that he's using a 30 sec. shutter, a 16 aperture and a 50 ISO.
skunkgecko 9 months ago 2
@dcnutter full manual does not have exposure compensation. You are your own exposure compensation
Dragon4eva 7 months ago
Lovely shots what brand of ND filters are you using ? Lee ? I can't shoot at 17mm with mine or I see the filter holder.
accesser 2 years ago