How to mod a PS2 slim (PlayStation 2)

[RafaelPulchinelli]

Its 30 or 32 awg?

[QuattroSProduction]

Awesome.. Can i instal modbo 4.0 chip on my ps2 slim scph 90004 pal, 9c ? ;)

[lockerzfan1359]

does this allow burnable games to work ?

[m8766654321]

where can i buy the chip???

[visloskyclub]

@m8766654321

ioffer.com they sell these ps2's all the time

[wolfmankurd]

This guy is pretty pro with a soldering iron.

[Blackinterceptor999]

Ok is is possible to use this with my hard drive/network adapter to run installed games with a boot loader? Actually my goal if it is possible is to load the boot loader via memory card WITHOUT disk to run the back up games without inserting the disk....I have a three yr old son who plays with my system, no matter how careful he is the disks always get damaged so the need to remove disks from the equation is highly needed here! that's something I'd be willing to pay for! Thanks for the video!

[Bordi98]

I can even use other modchip? :)

[quiniroyce]

3 sony employees just disliked the video

[visloskyclub]

@quiniroyce its only 3 people plus the ps2 is pretty much well done in sales.

[MrKarcsi5]

SEGGBE



[hallugi]

nice skills

[visloskyclub]

@hallugi  it is a skill

[Bagsiu6]

Which chip will fit into PS2 Slim v14 (SCPH-75-004)?

[VladEmilian1]

esti roman,nu-i asa?

[shortyWTF]

@VladEmilian1 da

[TheThomas1895]

how to fix thissss!!!!!!

/watch?v=vV2GsxzsbmA

[cronocrusaide]

this is a fat playstation 2

[JimVincent]

@cronocrusaide No, it isn't.

[frannylpfan]

I dont get it. How can you make a tutorial with music? I didnt understand anything.

[TheFrogman112]

What does this chip do?

[yummy2003]

where i can find the diagram for this?

[johnko13]

is crystal chip better than modbo 4.0?

Which modchip has usb boot capability?

[johnko13]

man are you using just solder or both solder and flux?

[MadUrsli]

did you use solder flux? or a gel? or whats this on the top of your cable?

[metaldra900n]

oh shiii!! what a pro!! can you tell me how long this takes starting from opening it to puting it back together cause im thinking to pay someone to chip it but i donk know how long it should take (and i have a phat ps2)

[Hondasr93cbr]

Hi whats the name of alcohol fluid you use. is there different types are they all the same?

[syed2311999]

can u tell where did you buy the modify chip plz

[Hondasr93cbr]

@syed2311999 hi you can buy the modbo 4.0 chip for under £10 off ebay.

[syed2311999]

how did you make these wires

[willabell88]

@syed2311999 They seem to be 30 gauge wire

[elias98123]

ehhm PLZ RESPOND! so i just found a "modbo 4.0" on my room have no idea what it is . just found out that it is to mod playstation 2 ! :o but what mods is it? do i have to load them via my computer? PLZ RESPOND DONT KNOW ANYTHING ABOUT THIS :S

[Anthman46]

@elias98123 You install it and then its modded, no additional software needed!

[elias98123]

@Anthman46 but what is that thing u use on the chip in the video? :)

[SuperDisco91]

Pre soldered the board.... ug

[TheVGGP]

the chip comes with wires and directions right?

[almiukask]

Hi, what kind of material your wires are? In this video, they seems to heat very fast.

[UberJerkyNerd]

Your soldering skills are fucking amazing. Can you tell me which brand soldering iron you're working with in this video? I'm preparing to attempt a mod that requires this level of precision and I can use all the help I can get.

[gildef]

NICe!! the name of the song is "Need To Feel Loved (Adam K & Soha Remix) It's by Reflekt Feat: Deline Bass

[RuiG87]

are you satisfied with the Modbo 4.0? i'm thinking of purchasing it but i dont realy know alot about modchips.

i use Swap Magic but due to the lack of DVD9 compatibility i cant run Ryu ga Gotoku 2.

[kenedi62]

What does "mod" means and what does it help ?? please could any one tell me ?

[soup163]

@kenedi62 it can play burned games

[aminedoulfikar]

this is impossible to do lol u must be a good hacker to do all that

[TheYaseenin]

very tricky job done greatly

[leeeleveneleven]

whats the purpose of "moding"

a ps2?

[TheYaseenin]

@leeeleveneleven to play pirated games

[leeeleveneleven]

@TheYaseenin i'm not a p.c. guy..u should come over & hook my shit up

[Clarensee]

Two huge thumbs up man! The filming is top notch. Could please share an advice? Can I buy these very thin wire off of eBay? (tried different queries, none of them worked) If not, where did you get those?

[willabell88]

@Clarensee The wire used looks to be 30 gauge wire. You can pick some up at a local Radio Shack. Look for something called "Wire Wrap"

Hope this helps!

[Clarensee]

@willabell88 Too bad I don't live in the US. :) We don't have Radioshacks or any decent electronics outlets for that matter here. Thanks anyway, though. =)

[panicabogdan]

modarea cu soft e mult mai avantajoasa

[lf881]

Nicely done mod. Thanks for sharing this video!

Do you pre-tin the wires or you just add some flux to them?

[lf881]

Nicely done mod. Thanks for this video!

Do you pre-tin the wires or you just add some flux to them?

[MYDRAGGIN84]

how are u doing the wires i need help with this

[MYDRAGGIN84]

did u tin ur to make those bubbles and did u added flux to the wire when u was at the black chip lmk im a newbie

[MICKUS100]

I am too scared to set my PS2 in danger :S

[Ponowx]

as installed in a 90010 ps2 console?

[shortyWTF]

@Ponowx SCPH 90004 PAL

[Clarensee]

And clean nails... man, you ARE pro. =)

[BestSolidSnake007]

@shortyWTF dear uploader! How can I remove ps2 chips wich make the console illegal?? I need to remove is beacuse I would like to sell it wich is original. Please reply! It must read only original games!

[shortyWTF]

@BestSolidSnake007 separates the chip with a soldering iron

[mission156Pro]

@BestSolidSnake007 Pull the wires off.

[GendarmerieNationaIe]

@shortyWTF it works on the SCHP 90004 CB ?

[shortyWTF]

@GendarmerieNationaIe yes

[GendarmerieNationaIe]

@shortyWTF are you a diagram to put the chip on a SCPH 90004 CB?

[ak476223]

@shortyWTF i have a question i m trying to modd chip my ps2 where to connect the lines, where on motherboard should i attact the lines

could you plz help with it

i would appreciate that

[LiveSteamMad]

Hi, can I ask please which exact brand and model name / number of soldering iron and soldering bit are you using in this video, and which exact brand and product code of Flux are you using in this video, and which brand / type of wire (and diameter and number of cores) are you using in this video. Many Thanks in advance. Hope you can answer my questions, I am hoping to mod my own GH-032-12 PS2, and I have a Modbo 4.0 that I bought from EuroAsia coming in the post very soon. Cheers, Alistair G.

[pluterday]

muy bueno ...

[ILFZ2]

LOL I was watching this cause I was bored. But it's a great video XD

[Naurri]

how da hell u gonna have this epicly awesome vid without a song name??....whats the song name

[shortyWTF]

@Naurri watch complete video

[Naurri]

@Naurri OHHH MUHA thanks imma use this in a mix :D

[Dannyinclub]

@Naurri 

[Dannyinclub]

@Naurri look under likes !

[Naurri]

@Dannyinclub LOL srry didnt see that im gonna use this in a Mix or something

[Dannyinclub]

@Naurri nicee aye its a good song.

[GhibliFan1]

Is this just for allowing the playing of pira..erm, back ups, or is it to extend the console's life? It's just that PS2 games are so damn cheap these days on ebay, I'm wondering what the point is in 2011?

[Richificationism]

nice man very clever

[Dannyinclub]

Nicee job wish i could solder like that :)

[dcheartly]

I was watching this video, and I do soldering, I know how it is, but as i was watching this, I could only say "HOLY SHIT this guy is good"

[Dannyinclub]

@dcheartly the modchip.com guy is better tho :)

[Bvzijverden]

@dcheartly Really????? The only thing I know to say is, this guy doesn't have wire strippers...

+ a solder connection shouldn't hold the wire into place + you have to use flux...

[mrdata1963]

All I can say a great vid and very tidy work, NICE ONE :@)

[shortyWTF]

@mrdata1963 thx

[SgtLapdance]

@mark1235600 4 can use the NEO FIX xiii or the SummOne-Fix, but neo fix is much better.. it will protect your laser-unit... greetings

[shortyWTF]

da

[Eltemilatrinidad]

placa schp-90010 gh-072-42??????

[mark1235600]

hey guys is it true that if u install this on ur ps2, u can get serious problems?

with the lazer, disc tray etc.?

[hero2317]

Nice

[SagatPL]

cables dipped in flux? nice take off the insulation of a soldering iron :)

[yo6ial]

u got steady hands. thumbs up! :D

 but why leave the tips of the wires so long? (Some look like 2mm to me)

I'd cut them to no more than a milimeter for vias and mp's.

Even shorter for soldering on those tiny chip pins ;)

[afcaj0od]

what does this mod do? i dont have a ps2 i havea x360 but i just wanna know :D

[ericohman]

@afcaj0od lets you play burned games, region free dvd etc...

[thenarutosenin1]

NO LO LEAS NO LO LEAS!!NO LEAS ESTO!!SI LO AS LEIDO COPIA Y PEGA ESTO EN 5 VIDEOS MAS SI NO LO HACES TU MADRE MORIRA EN 3 DIAS POR FAVOR HACEME CASO ES UNA MALDICION