There is a chime like this at a local nursery near Sea-Tac airport on HWY 99. That chime is even larger and has steel powder coated chimes that sound during breezes which blow up from the Puget Sound through the nursery. Does not take a lot of wind only a slight breeze, do not know what they do when it gets really windy, probably tie it down.
The tones and there vibrato and length can be decoded into a specific unversial language. The mastering and manipulation of this language is of great use to us.
@wayhighpatrol Whoa...Incredible! I never knew there were wind chimes out there even larger than Basso Profundo! Oh, how I would LOVE to get my hands on a set of these...
These chimes are now installed in a 40' tetrahedron structure in Humboldt Park in Chico CA. The tetrahedron is made from 4' x 40' schedule 40 steel pipe. The chimes are 6.5" aluminum pipe between 6' and 9' long.
The project is called Resonance. The tetrahedron is also supported on its structural nodes which allow it to vibrate at a very low visible frequency.
@GreggPayne - greg, ya well, there isn't too much wind in my garage - lol - they now hang frojm a jacaranda tree in our back yard. i changed the sail design to a circular aluminum shape like you did - what's it called, a gogo - looks a helluva lot better than the square oak plank. thanks for inspiring me.
what did you use to record the sound for this video? the sound on mine isn't very good as i took the video with a small canon point & shoot camera.
I could listen to that all day & night. Would you be so kind as to share the schematics or blueprints to your design? My husband & I would like to build one just like it.
Thanks, Phillygale. There are no schematics or blueprints. All pipes have to be tuned individually. These use 6" aluminum pipe hung from a 3' diameter hoop. A large smooth stream bed stone wrapped with saddle leather hits the pipes. Gregg.
I am going there in April. It's in Kansas. They sound incredible. I hope the wind is blowing strong when I'm there, because otherwise they don't do much at all. One time my friend jumped up to grab the string on the big one to bang it into the chimes but it just bounced off of them and made no sounds. It was pretty funny, actually.
There is a place near my friends house that has a series of large windchimes that hang really high that go from large to ridiculously large. It takes a lot of wind to get all of them going right, and I've only heard that one time I think. I love the sound of them, but I get this really scared sensation being around them when looking at the largest one from underneath it. I don't understand it?
All have a # 1 SUPER SIZED!
barronredneck 1 month ago
This is what it sounds like to me during a funeral...
ಥ_ಥ
66Metallicaman66 1 month ago
wow... can't say more than that
HTCSWEOD 1 month ago
hmm. the subject; on the 4th note.. i bet he did not expect such.
JyROFATE 1 month ago
done made me up one from possums coons and other critters dead on the road - hung me a anvil ina middle of em -didnt sound nuffin like this
37zeus37 2 months ago
There is a chime like this at a local nursery near Sea-Tac airport on HWY 99. That chime is even larger and has steel powder coated chimes that sound during breezes which blow up from the Puget Sound through the nursery. Does not take a lot of wind only a slight breeze, do not know what they do when it gets really windy, probably tie it down.
waislandres 2 months ago
The tones and there vibrato and length can be decoded into a specific unversial language. The mastering and manipulation of this language is of great use to us.
pratsch42 4 months ago
@wayhighpatrol Whoa...Incredible! I never knew there were wind chimes out there even larger than Basso Profundo! Oh, how I would LOVE to get my hands on a set of these...
StormOfMaat 4 months ago
Thanks for sharing :)
luciankaltz 6 months ago
These chimes are now installed in a 40' tetrahedron structure in Humboldt Park in Chico CA. The tetrahedron is made from 4' x 40' schedule 40 steel pipe. The chimes are 6.5" aluminum pipe between 6' and 9' long.
The project is called Resonance. The tetrahedron is also supported on its structural nodes which allow it to vibrate at a very low visible frequency.
wayhighpatrol 6 months ago
@wayhighpatrol Is the alum pipe seamless? I can find seamless pipe Nowhere!
DamianNixon 3 months ago
1: Where are these?
2: What are their sizes?
3: How much does this size steel cost?
4: Am I right in assuming their made of steel?
watchthefaithrain 6 months ago
@watchthefaithrain they may be made of pure aluminum which a beautiful tone.
gggreggg 4 months ago
I disliked the video.
e510275 7 months ago
@e510275
And why did you do that? seriously...
ZOMBIELANDakaUSA 6 months ago
these sound so beautiful & peaceful.
i have just finished my first set of wind chimes tuned to a pentatonic scale starting at a3.
now after hearing these, i think i may build a huge set an octave lower.
ccwilloe 1 year ago
@ccwilloe
Very nice for a first set! I like the toe on the windsail action.
GreggPayne 1 year ago
@GreggPayne - greg, ya well, there isn't too much wind in my garage - lol - they now hang frojm a jacaranda tree in our back yard. i changed the sail design to a circular aluminum shape like you did - what's it called, a gogo - looks a helluva lot better than the square oak plank. thanks for inspiring me.
what did you use to record the sound for this video? the sound on mine isn't very good as i took the video with a small canon point & shoot camera.
ccwilloe 1 year ago
Comment removed
ccwilloe 1 year ago
this is absolutely wonderful!! thank you!!
wish it was longer!!
ashaw722 1 year ago
Brass is great, but it's a lot heavier.
GreggPayne 1 year ago
So beautiful...love chimes...
shesaidsoftly 1 year ago
Beautiful , nothing else to say
dogfool1960 2 years ago
That's amazing! One of these days I'm going to get around to making myself some wind chimes (probably smaller)
BaritoneSammy 2 years ago
You'd need a hurricane to get these to chime
idigcars 2 years ago 22
They chime easily in a good breeze.
GreggPayne 2 years ago
im jealous, mine weight close to nothing and barely chime at all in strong winds..go figure
idigcars 2 years ago
Which chime is this one called and can it be ordered from a website?
zunidoll2 2 years ago
Now THIS is IMPRESSIVE! SOMEONE PLEASE come forth with the creator of this thing. That sounded so deep.
zunidoll2 2 years ago
I like how you ended on the G chime --- *KOOOOOOONNNNNNG* That's really pleasing Gregg.
yermyahu 2 years ago
Wow! love and peace and harmony
SangitaPranaMusic 2 years ago
We havesimilar ones in our front deck,though thyy're not as big.Check out the wind chimes from my back yard.They're really pretty.
Marianvalkyrien 2 years ago
Thank you for sharing this!
I could listen to that all day & night. Would you be so kind as to share the schematics or blueprints to your design? My husband & I would like to build one just like it.
Thank you again.
Phillygale137 2 years ago 2
:) Smile
Phillygale137 2 years ago
Thanks, Phillygale. There are no schematics or blueprints. All pipes have to be tuned individually. These use 6" aluminum pipe hung from a 3' diameter hoop. A large smooth stream bed stone wrapped with saddle leather hits the pipes. Gregg.
GreggPayne 2 years ago
Do you sell these? If so what do you call this specific chime and how much does it cost? Do you have a website?
zunidoll2 2 years ago
Nice!!!
Ogretone 2 years ago
beautiful! thanks for sharing this! 5***** for you
catinnahat 2 years ago
Awesome.
Korriband 2 years ago
WOW!!!!!! where are these located?
twasbrillig33 2 years ago
Loved seeing this in the kutiman video!
Isoquant 2 years ago
Where do you live? Send me a photo if you can, I'd love to see some other ridiculously large ones. How do they sound?
GreggPayne 2 years ago
I am going there in April. It's in Kansas. They sound incredible. I hope the wind is blowing strong when I'm there, because otherwise they don't do much at all. One time my friend jumped up to grab the string on the big one to bang it into the chimes but it just bounced off of them and made no sounds. It was pretty funny, actually.
ParodyPatches 2 years ago
There is a place near my friends house that has a series of large windchimes that hang really high that go from large to ridiculously large. It takes a lot of wind to get all of them going right, and I've only heard that one time I think. I love the sound of them, but I get this really scared sensation being around them when looking at the largest one from underneath it. I don't understand it?
ParodyPatches 2 years ago
i think there great
xmelziemoox 3 years ago 2
so much cooler when you are there and you can feel it go through your body
anthony1832 3 years ago 3
thats so beatiful the resonance of them is incredible
creamywhip 3 years ago 18
@creamywhip i can feel it resonate to my soul ...just through my speakers...wow
kamillianne 9 months ago
What diameter tube was used and was it steel or aluminum pipes?
I want to make a big one like that, I do have one I made on my channel.
snoopdog68 3 years ago
snoop- listen to the video, man, he said they were alumimum. maple tree must be saggin for it- how many pounds is that puppy?
them is fireproof but whatup with the TREE?
petroglyph66 3 years ago
How tall is that wind chime?
William.
nwest1140 3 years ago
The whole deal is about sixteen feet tall. The pipes are between 9' and 6' long.
GreggPayne 3 years ago
THOSE are amazing!!! Love it!!
dragynheart13 3 years ago
I want them! Where can I find 'em?
nickmfbender 3 years ago