Experiment testing if spark plug

[Thebigbambeano]

RED...... BULL

[drunkermf]

sounds like somebody is gagging because of the fumes

[tediouse]

have you tried those 10mm race plug ?the type

with the earth pin on the inside?

tediouse

[svlad12]

I have spark plugs PLAZMOFOR (plazma spark plugs).

My engine save GAS & have lower toxicity.

My engine not having ping issues!

[anacondabill]

What the hell? This is all new to me...what is it?

[prototype9000]

anyways it sounds like you are using an auto relay to drive that

[prototype9000]

the auto industry and nasa and other places have used plasma sparks to ignite water mist to mold metal parts via an explosion i forgot what theprocess is called ive allways wondered if you could run an engine that way without the engine having ping issues

[The777truth]

Nice lil experiment. I ve studied subject this extensively. TRY putting the plug into the water while you have current. See if you get thrust from steem. Increase the AMP.

[ktservicescorp]

The resistor on the spark plug jams up the spark in the water. I am going to remove it and try that!

Todd

[tediouse]

check tediouse /race plug

[jorgerojo73]

Have you heard about the Camaro 1978? it function only on water (two batteries, an DC/AC inverter relays (one per cilinder) and a diferent conexion on each spark plug. Maybe try a Hotwire from NOLOGY. Good luck!

[ktservicescorp]

Thank you... I will look into it :)

T

[dreamyear]

standard ignition coil output to spark plug is about 24000v for each cylinder at combustion engine.

instead of using car inverter you just replace the ignition coil with higher capacity..wouldn't that make plasma spark?

[ktservicescorp]

Please explain; write me an email.

[jesslessthemess]

I don't know if this guy got bck to you Todd, but you can find these aftermarket products (most often ATV or rice rocket cars) or I think you could just put two ignition coils in series. But the idea is to take the normal 25kv and make it 50kv or more.

[XRRep]

i am still waiting for my bedini parts to arrive. the trick is cold energy, through the use of square wave pattern. have you seen peter lindermann's videos?

[XRRep]

i used little o-rings for my spacers, bought at auto parts store. 1mm gap or less, depending on how much pressure i but on the nylon fasteners that keep my plates together. S. meyers used radiant energy like J.bedini, thats why meyers cell did not heat up. if you can find the sweet spot on you bedini motor to charge a battery, that should be the optimal frequence for the w.f.cell then all that is needed is to very the voltage for more or less hho production.

[XRRep]

dude replace the S.Plug hook up your cell instead.

[ktservicescorp]

I need to figure out how to get less resistance. I am going to put two dry cells together and see what happens for optimal gapping.

T

[coquivagabundo]

try doing a chimney(however it spells) and concentrate the vapor inside and at the same time insert the plug in it, so nothing else is exposed. the narrower the space in the tube(chimmney) the better the chances for you if anything should happed. I guess

[ktservicescorp]

That is my next move with more of a plasma spark. When the water boiled it created too much vapor for that little spark to handle. When I took to flame away and blew cold air over the warm water is when I saw the spark jump a lot more that dry air. Who knows what I am doing, just need to know if Stan Meyers found a way to disassociate and burn the water at the same time for combustion.

[ktservicescorp]

I am not trying to create a large spark. I am trying to see what effect water vapor has on a spark. Stan Meyers figured it out! But I don't know how. My next test is to use a 400watt power inverter, recify the 110vac to make 110vdc and see how this affect the spark plug and what effect it has on the water vapor.

[december105]

OK i miss took your efforts GOOD LUCK

[december105]

I'm no expert but my guess is you will need a much larger spark one that forms a large plasma arc kind of like a plasma torch that is used to cut steel. Or the ark that is formed by a Tig welder.

[ktservicescorp]

Ya can't put that into a car affectively. It has to be scaled down.