LOADED ORANGATANG IN HEAT 75mm 80a

[JojoBarrientos]

it spins around around around like a wheel should like a wheel sho oould.

[azmonkeyboy2]

witch orangatangs shood i get on my tan tien ?

[VSUZUKIV]

do i need spacers for this wheels?

[Kmann2202]

shitty ass wheelspin

[mistacadz24]

It doesn't mean anything if it spins a while. All that matters is when your on the board.

[DanknoeStyle]

what about the orangatang stimulus ?

[123ModoNauer]

this video just changed my life

[WTDproductions10]

i like the part where the wheel spinned

[Opeth291]

you haven't even rode the board yet...

on a side note i love My in-heats they grip really well and if you break them in they slide 180 standies like butter, getting some purple durians soon, while i wait for my warranty, new dervish my way from loaded in just a few days.

[MrMagoo414]

@Opeth291 jesus

thank god that you know longboards. and i was wondering if this is a good setup for the dervish that im going to order. flex 2

bear grizzles 181mm trucks

75mm 80a wheels

but im wondering if i should get the 75mm 80 durians or the in heats...please please please help me!!!!!!!

[monarchmanics]

what kind of bearing are those

[marty1091]

i have bigzigs 77a and they just broke yesterday. like a huge chunk just broke off the side. r these wheels a little less hollow if u know what i mean. cz the bigzigs stick out really far so i'm guessing thats why they broke.

[S3V44]

you loaded your bearings crooked

[sk8drum44]

Do the in heats bite on a flex 2 dervish?

[otze2007]

@sk8drum44 no... i only got Problems with the gunmetal trucks.. randal, paris no problem!

[MrLongboarder94]

why dont you accualy go ride

[AirForce576]

what o tang wheel is the best for carving/cruising?

[jobuXC]

so?

[Laredo127]

TRADE: if anyone has these otang wheels (same size and durometer), I will trade u a set of new never used Abec 11 Flywheels 83mm 78a for them. The newer the better! Thanx!!

[spaceframe01]

they look so pretty before the road strips off the writting and dulls the colour <3 i have in heats too, purple

[Retardidape]

These videos always crack me up "omg lolz, look at ma wheelz spin! It spins faster because ihts brahnd nu Orangatang wheelz, not because the bearings."

[applepiewithtoast]

@Retardidape Exactly what I was thinking....

[gavmack11]

what was the point of that?

[Gibson2471]

i was wondering if u need bearing spacers for the 4 pres wheels, I no u need them for the in heats, but the 4 pres look smaller

[qwert562]

nah i dnt think u need spacers for the 4 pres. i tried it and it was a waste of 15 minutes of my life. and ur right its becuz theyr smaller

[lollmfaorofllawlftw]

Which wheels would be better for just cruisin and going down hills? , i dont like the slidey ones i want the grippier ones

[WhoTubeProductions]

These, Orangatang In-Heats (80a) (Orange)

[ALtsk8a]

get sum pink zig zagz they grip like a mofo

[pcc4love]

In heats orange or for 4presidents orange

[lollmfaorofllawlftw]

oh thanks but I figured out how to slide now i like the slidy ones better so i got the durian 86a's but thanks anyway

[pcc4love]

i would had gone with the 83a's 86 is too much, you'll have a hard time making turns when going downhill they slide real easily

[lollmfaorofllawlftw]

i got 86a cuz they are basically going to be my trick wheels im thinking bout gettin some 83a's though but its still a thought

[pcc4love]

that makes sense i use 83's as my trick wheels and they work good for when i need to bomb hills, i ride a vanguard and the two together are amazing in my opinion

[thekingofslade]

they are both alike. just size difference really

[ToxicLongboarding]

for free ride and downhilling/slides, in heats or 4 prez? which would be better?

[Drive2kill]

actually, you should go for the "orangatang freerides" or "durian" or somethin like that. check out the orangatang website, you'll figure it out.

[sector9sunset]

wat kind of bearings

[bookraper]

i got those same wheels tday FO FREE!

[meatwadJ]

whasup?!?!?!?! how might i inquire?

[RR5GUITAR]

HOW?!

[SurfSkateAmby]

sexy

[TheAguAnno]

on a dervish i see.. nice nice.

[skangel13]

so sexy

[tevens22]

that's a sweet setup get it.

[Bubishi8]

Once you Slide out purple ones, they will lose grip, they are still fine to cruise, but id say go with big zigz 75mm 80A i rip those for a full year, with a lot of sliding, yet they still keep moderate grip around corners, and ride almost everything.

[hipppiman]

Yes the purples ride well, I have em. just normal wheels but harder duro thats all.

[canklescankles]

Orange in heats slide well after being worn in, and they grip great. If you are comfortable on your board you can make them do either at will. If you just want some smooth grippy wheels, get some super balls. they wont slide for crap though

[marlo916]

what website did you order your setup at?

[Lambycapo]

would you recommend the in heat wheel or the smaller ones for a loaded pintail??

and are these better wheels than the abec 11 zig zags????

[redbullism]

If it is me, in heat wheel is chosen. In heat wheel is sticky on ground and I think sticking well though it is thought that abec 11 zig zags is also good. Therefore, I am in heat wheel. However, because the feeling changes depending on the setting, I think that it is your favor after all.

[LongboardBC]

@redbullism you are in heat?

[XXFAINTPLAYERXX]

@Lambycapo you want small wheels for a board like that... with bigs wheels it will make it really high off the ground... i would run some fat frees or stimulus.

[redkush420]

@Lambycapo wayyy more responsive and faster

[dumbbroadcasts]

@Lambycapo big zigs are better

[lamp666]

rock'n ron ceramics are good... mine spin for over 6 minutes. ALso, ive hit 105 km/h on them, and they didnt heat up all that much. they are in my eyes, some of the best.

[whoregonian]

yea. my favorite bearings are no doubt super swiss 6. i dont own a set, but my friend does and theyre smoooov

[1nate8]

what kind of bearings

[redbullism]

This is NINJA abec7.

[1nate8]

i heard the bones reds are pretty good, are these better than the reds?

[redbullism]

The same design specifications as BONES SWISS, and earliness, smoothness, lasting long it, and made in China where the manufacturing cost is cheap the manufactured bearing BONES REDS are to maintain it easily.

My favor is NINJA though thought that BONES is also good.

[PUKA20220202]

ninja's r cool but im getting boneswiss labs for christmas! :)

[marty1091]

@1nate8 get super reds, only five bucks more but they're a lot better.