Added: 3 years ago
From: gilbondfac
Views: 46,107
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (90)

Sign In or Sign Up now to post a comment!
  • If you would make a HUGE ( 100 km diameter ) ROUND track and put sides to it eould the ball go forever there?

  • Would it be possible to up the power on the magnets on the full circle test at 5:28 to the point where the ball would go fast enough to pass the magnetic trap and continue around, constantly accelerating like some kind of perpetual motion machine?

  • Comment removed

  • dose the magnetic ball have to stop at the end?

  • it scared me when that guy jumps out at u

  • I love your sound effects

  • Comment removed

  • i love geniuses. practical applications are always beyond them.

  • gilbondfac im wondering if the length of the ramp is greater would it then be enough to produce enough nrg to remove the ball from the end and reset it at the start. in theory it should be....and should be able to genarate surplus nrg.

  • I don't get any of this. Why can't the disk with the ball rolling around it be a full loop? why only half?

  • Comment removed

  • Too bad the author never talked about perpetual motion.You just lose an nice opportunity to shut the fuck up.

  • I hate the UFO sounds, it's annoying!

  • wtf is up with the annoying soundsssssss

  • where did you buy de magnets?

  • dude 6:35 seriously remove magnetic trap! infinate speed increace till it cant be held to platters by magnets! then duck!

  • nice. how did you make all of this, or even come up with the ideas?

  • Hi, what is the sides of the magnetic ramp and the half disk and the whole disk made of?

    Thanks Richard

  • Hello Gilles!

    Please help me by answering the following questions:

    1 - How many rounds did you use in the coil of the LED?

    2 - What is the minimum voltage for the LED light?

    I am awaiting your reply.

    Thanks

  • it's just a mini coil relay 12 Volts and there are many LED in several voltage !

    I use a white LED in 1.8 V -20mA ,but you can try other...

  • @gilbondfac

    I enjoy your research.

    I just posted two videos explaining the East and West pole effect.

    I would love to hear your feedback

  • Comment removed

  • Comment removed

  • Loved the sound....very moog like..... I am going to have to ask however...what good it this if it cannot overcome the gate effect. You could set a few in a row and trigger each one like dominos, but you would still have to physically place a manget back to the start to get a continuious movement. Unless you can generate enough energy to mechanically place the magnet with some left over...I am not sure how this device could be usefull except as a novelty.

  • if you move the magnet in towards the centre of he disk is there a point where the ball can overcome the gate effect without falling off the disk?

  • moses ... -.-

  • ok i get it , i'm scared

  • the sounds make the whole video xDDD im laughing my ass off

  • Hi, again ... ;)

    What happens if you put an extra steel ball at the end of the track at the point where the moving ball stops?

    Will it get the momentum of the moving ball and fall to the start of the track below it?

    Or will they just stick together at the upper part of the track?

    Richard

  • they just stick together ! A new video coming soon

    just for the acceleration

  • cool. I see the potential there. !

  • Yes but how to get the ball to release at the end so the cycle can repeat. Crack that and I will buy you a beer.

    Dan

  • Hello everybody ! i'm going to do a new video "how build an magnetic accelerator" see you soon !

  • Comment removed

  • Please don't add any stupid sounds it's unbearable...

  • Naw.....I disagree! I thought that the sound effects made this video......Otherwise It would just remind me of a hundred other similiar videos Ive seen using magnets to try to get some kind of free energy.

  • Comment removed

  • LOL!! I suppose I am lucky that I have not had a working video camera in a while! I have recently started working with a buddy whith a camera and some editing equipment So far actualy doing some music video stuff that I am acutally pretty proud of...but some experiments of a more 'scientific' nature will probably be forthcoming!! I will try to only post my most successful failures! PS I must be 12 & like to play with sounds cause I still think the music was kinda phat!(as the young hipsters say)

  • Comment removed

  • @djburke135 If he cracks that, I think he will deserve more than a beer. JJ

  • Thanks for this video explaining how you did it. I see now that this is not perpetual energy.

    What would you say the restrictions are on ramp length and speed? Could you make a 10 mile ramp? Would the average speed along is be the same as a 10 inch one?

  • of course not all depends on the force of attraction ?

  • I don't get why this video needs to be ten minutes long. Everything shown here I have seen before when I was in school and in various other videos, it's nothing new. And what's with the shitty sound effects?, so fucking annoying and pointless.

  • yes, the sound effects are definitely annoying

  • indeed it is annoying...must be a new guy who think he found all of this by himself...there's a few of theses self-righious bastards poping up each year in here so don't be too much surprised lol

  • but if the ball is brought to a stop by the magnets then the cycle cannot be repeated and no energy can be created other than that stored by placing the ball in its starting position.

  • that's cool, but it'd be awesome to see it come full circle, continuously spinning and generating, why stop it?

  • ok so very awesome work I could see now how electricity could be produced. but the sound effects well were you just learning how to integrate them in LOL

  • on the 5.40 one cant you take the magnets off of the top of the disc and let it keep going around??? regards mark

  • does this remind anyone else of sonic the hedgehog?

  • use more coils front start to finish.

  • si k te gustan los imanes m das hueva men

  • see if you can store the electricity from the coil in a capacitor and then see if you can use the stored energy in the cap to do some extra work on the steel ball to keep it going. you might be able to power a servo to shield the magnets so that the ball will continue its course.

  • this is interesting. is your idea to use hundreds of spheres to produce a continuous current? Them all "firing" like in a machine gun?

  • ton video es super je suis entrain de le faire

    mais jaimit les aimant allentour pi ca arette

    ya de quoi que je fait de mal

  • this is a very interesting video, except i had to watch it on mute because all those bloody sound effects gave me a headache. maybe lay off them next time?

  • are you patenting also the magnets?

  • Hi cool experiment im thinking in doing it in a school project to generate electricity but can u tell me the meassures of the circle in the middle.

  • Nice! it's so fast

  • Nothing to see here, except a neat toy. There's no mysterious source of energy, I'm afraid. All the energy that you *see* in the system is balanced by the work you have to do to detach the ball from the magnets afterwards.

  • try it !

  • your a bored cunt lol

  • so this is your ramp in a circle. nice - but it stops before the circle ends. why dont you let the sphere fall down onto the bottom-rail so it may continue moving??

    i would really like to know how many rounds it will be able to spin...

  • Yo tengo una consulta... ¿Por qué no se podría hacer un mecanismo de movimiento continuo basado en esto?

  • This is the same technology in "Superman the ride" at Six Flags.

    Magnets placed at gapped intervals to create acceleration without much friction.

    Cool to play with but unfeasable on a global scale...too expensive!

  • juste pour savoir, si tu place pleusieur rampes droites en ligne, pourait tu avoir une accélération continue, la bille qui pousse l'autre toujours un peut plus vite...

  • oui effectivement essaie de reproduire cette expérience

  • dit moi ou avoir le matos pi ma essailler

  • sers toi des films sur ma rampe classique droite et ma boucle (désolé mais 1 brevet est déposé) improvise inspire toi de tes connaissances

  • je me dit qu'il serait possible de toujoirs la pousser un peut plus vite par magnétisme, ou méme de la pousser avec contact comme dans ton video(magnet gun), la bille qui sort de la rampe va clairement plus vite que celle qui la propulse au départ. Il y a probablement des régle qui font que ce que je dit marche pas (jai ma phisique de sec 5), et je me dit aussi que si ca marcherait tu aurait probablement essailler

  • I have checked out your site, Excellent work, I have also done some work on magnetic rails using permanent magnets but you have taken it to a new level with your novel experiments and artistic designs, very cool! I will check out the rest of your vids, Please keep checking my site as I have started loading my old experiments first from 20 years ago and onwards and the best is yet to be presented.

  • Been there, done that :) Par contre, j'ai vu traîner pas plus loin qu'ici-même des vidéos d'aures bricoleurs habiles, dont l'un qui a fait un peu comme vous, mais qui a réussi à faire tourner son aimant en continu, avez-vous essayé? il y a là quelque chose de très intéressant à creuser :)

  • je ne plaisante pas reproduisez la cette rampe et si vous travaillez en physique vous devriez savoir qu'il existe une loi sur la conservation d'énergie...donc en boucle je demande à voir ! les système à aimants permanents sont en équilibre et doivent refermer le champ magnétique

    sauf si l'on découvre un nouveau matériaux qui en bout de course change d'état au passage de la sphère magnétique pour lui permettre le passage (je travaille dessus)

  • Comme les autres, je suis assez d'accord, les effets sonores ça le fait pas trop... comme les textes à la "star wars".

    Vous êtes chercheur ou bien élève? je suis en fac de sciences, à Jussieu, et je travaille aussi sur le magnétisme permanent.

  • et alors ? vous trouvez youtube bien sérieux vous? oui je travaille pour la recherche et de temps en temps je m'amuse avec mes connaissances?

    si vous travaillez sur le magnétisme reproduisez dont l'expérience et on reparlera ! padawan !

  • dudeeee.... cut those sounds plz..

  • Das ist die Technik der Schwebebahn...

    Also Deutsch

  • speak in english ! thanks !

  • the sound effects were overkill, they get annoying

  • I don't understand the significance of this -- isn't it just the same concept on a track, disk and half-disk?

  • is the cup of water doing something?

  • Make a loop.

  • is it like u put magnet in the ramp and it contues

  • can you get the ball to fall off the end of the ramp and start its path all over again? there is your energy generator.

  • isn't that whole patent thing just an invention of the rothschild maffia?

  • what is your evidence jackpiss?

  • just search it on the internet my "friend"... :))

  • I really enjoy and appreciate your video uploads.

    thanks.

  • thanks !

  • are you going to make the ball go round and round to generate eletricity?

  • lmao

  • I would like !

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more