I am going to have to try this with my t maxx. i have been lookin for a fun project to do to it, with the goal of adding remote start. thank you for putting this up. can you give me any more information, or wiring diagrams for it?
Pretty innovative idea ya got there, if only they could find a way to make the starter smaller or if someone could figure out how to get the starter to run off of the T-Maxx's battery. I think I might do this with my revo
What about taking an electronic speed control and finding the positive and negative wire from the easy start plaug,and connecting the positive and negative from the speed control to the 2 easy start harness wire that go right to the electric start motor....and then powering the speed control with a small lipo battery and plugging the speed control into an 3 channel or 4 channel reciver and hitting a switch on the controller sending power to the electric start motor witch will start the engine
If your engine dies that often you need to add a remote starter you need to learn how to tune your damn engine. Running an Ofna Hyper .21 3 port on my T-Maxx years back I could run for 30+ minutes without needing to restart.
Its a good idea.But all that extra weight as mentioned before would drastically reduce Tmaxx topspeed from 45mph to about 30mph.Thinking about it not really so much of a good idea.
this adds alot of extra weight, and the tmaxx 3.3 already has 3 servo's being used due to it haveing reverse. it looks good but thats allot of extra weight, you should have used a 9.6volt pack from a nikko r/c
I think its a pice of shit. Lol nooo JKk verrry nice job dude,very smart,great clean cut all around wiring job and mounting. Excellent shit man great idea,have fun! 5*
Got to check out my video on the ROSS System. Can't even tell I got a Remote start on mine. I even still have reverse and all the other channels. If you want your truck to still look stock... Check Out My Video... Hope this helps.
wow.. thats really a nice clean way of doing it, rather than some other guys who hack it all in there..lol.. u did a really good job considering that it still has the factory plug...good work. keep it up.
nice my tmaxx hasnt run in like 2 years and i was cleaning and i saw my tmaxx 3.3 book and it instantly got me back into it i think im just gonna buy a whole new engine just so it will run good because i but like 5 gallons through it in the first year of owning it i got it maby in 2007
@joeldude76 that's is exactly how i got back into the hobby! i just found my model stampede parts and my old booklet and i got that feeling man i knew i wanted to get back into the hobby
Hey berto123078, excellent enginuity, and creativity. Your video is one of the first remote start setups I even saw on youtube. Did you know that there is an easyier, and much lighter way to do remote start now? Check out "Ross on a Revo" - Right here on YouTube...
Nice remote start. I got about 10% more hp from pulling off the stock airfilter and installing a KN style one from Autozone. If you would like more info please email me at cheesehead721998@yahoo.com Now it does crazy whelleys.
Nice remote start. I got about 10% more hp from pulling off the stock airfilter and installing a KN style one from Autozone. If you would like more info please email me at cheesehead721998@yahoo.com Now it does crazy whelleys.
Great video I did my remote start the same way it works great thx for the help I can still use my factory start and remote start. But couldnt find any heat shrink so I used electrical tape and Instead of cutting holes i used some sticky velcrow strips and put it on the easy starter, the battery box, and the servo bottom and top to hold everything down really good. This is best way to start a rc car!
i think i might do that but put the battery at the back so its more back heavey and dont effect it too much... or at the front to balance it out because mine allways tryes to do a backflip
Kinda adds a little bit of weight don't ya think ? You do know that they have a new 'remote start' out fot the Traxxas vehicles don't you ? They showed it on R/C Car Action's(AirAgeMedia1) channel from the RCX Expo this year. ;-)
Slick idea! I have the means to do that, but I'm not sure if I could give up my reverse. Anyway, for anyone interested eBay would be a great source for parts- used [and/or new] wiring harnesses, EZ start modules, etc. Anyway, neat to see how you went about doing that, it's very neat and clean without being complex. Good work
thanks for the comment.. but for me it's plenty fast enough don't need it to go 100 mph++++++ i haven't notice it any slower at all but it works great when ever it turns off just hit the switch and of i go :)
i don't need this truck to do 100 mph so having this pack doesn't affect how fast it goes will not to me it's plenty fast enough with this setup. and as to being lazy i don't really wanna spend my time going after the car and starting it every time it shuts off i rather hit a button and keep going thanks for your input
dude that is awsome man it really it clever to im going to copy u a little im going to do it just a little different but im going to copy u hope u dont mind very cool nice vid
thanks for the comment nitrorc4life but y buy another ez start if it already came with 1 i know it's smaller but then you'll be spending money on to make it remote start y not use what u have and just spend 5 bucks for the harness. the harness was used so the factory harness don't get cut when u want to remove the ezstart just unplug it :) i didn't feel like spending money on another ez start and battery i do and make with what i have it's cheaper lol
well i just wanna say that this is sweet, but get an ez start 1 bc right now you have the ez start 2.. the nuumber 1 is just a small black peice that a batt straps to... instead of a huge casing around the batt.. also intead of buyina another wire harness, you shouldve take the stock one, cut the wires, soldered in more wire to extend it, then put on some heat shrink so you dont have such a mess.. JMO still looks sweet!!!! I might try it on my revo!!!
hey can u guys give me some ideas as too make a muffler extension so the side of the truck and right rear suspension don't get dirty from runing it any ideas is more then welcome thanks
Thats cool. But it definitely will add weight. You will still pull wheelies all day long like you say. It adds weight so it might help to pull wheelies! but thats is really cool man i never had a remote start on my tmaxx. as u know i no longer have it but i miss it dearly...
not that i notice i still pull wheelies all the way down the street :) i open the ezstart up and use clear sylecone sealer on the electronic board for water proffing some what :) but no change on performance at all
That's awesome
theannoyingpie 5 days ago
Nice!
raceme1996 3 weeks ago
dude you just added soooo much weight
dustineng1 1 month ago
now u can start ur tmax and let the windsheild defrost
grangeroo 2 months ago
u are from clombia i can hear the news =)
ascath203 2 months ago
Thats cool. Curious on how many volts are actually needed to turn the motor over. If a smaller battery would work. Thinking
Dibbleg1 2 months ago
this is the most factory looking self start system i have ever seen. i think traxxas will study this video.
harleyrdr864 3 months ago
my bro did that in such a simpler way
tmaxxman1000 3 months ago
I am going to have to try this with my t maxx. i have been lookin for a fun project to do to it, with the goal of adding remote start. thank you for putting this up. can you give me any more information, or wiring diagrams for it?
MrJacobbjb 4 months ago
thumbs up if you read the box wen he set the camera down
199famus199 4 months ago 7
no top comments *HEFTY HEFTY HEFTY*
BackYardBashers137 5 months ago
That's very impressive bro"
I got to do min like that
nahjir1 5 months ago
Stop watching "primer impacto" cuz it distracted me
Chato225 6 months ago
@brodiemcivor cant be that small if you on it all the time
blazingtraxxas 6 months ago
hefty hefty hefty hefty wimpy wimpy wimpy
blazingtraxxas 6 months ago
do i need a hefty bag box or can i use glad :) nice job very clean i like it.
AStrayBull3t 7 months ago
damn thats clever
mrbhav25 7 months ago
Hefty Hefty Hefty!
XxSilentChief512xX 7 months ago
building mine right now down to the basement now
shp4x 7 months ago
nice bro
xsethx420x 7 months ago
awesome i otta do that to mine.
69dodgechargerrt1 7 months ago
" HEFTY HEFTY HEFTY"
MadBeast24 7 months ago 3
thats super cool i going to attempt that soon
fudgeman333 7 months ago
That... is genius.
iCHARRLZ 8 months ago
That's awesome but it would add a lot of weight I'll try it with my bad truck
gunnerboy207 8 months ago
It must be heavy as hell with that setup.
braco222 8 months ago
that will slow it down so much and it will add more wight on one side
and there was all ready a slight tilt on that side in the first place
TheRevo33 9 months ago
Thanks to you I did mine, thank you for this video I did a vid on mine to
NightSwawn 9 months ago
LMAO WOW FAIL.. U REALY WANA RUN A NITRO REVO WITH THAT HUGE BATTERY PACK ON IT LOL JUST GET A LIPO REVO THEM
hopcup1 10 months ago
Ok I know to some people this will be a stupid question but did the involve any soldering???
bigkdog363023 10 months ago
Pretty innovative idea ya got there, if only they could find a way to make the starter smaller or if someone could figure out how to get the starter to run off of the T-Maxx's battery. I think I might do this with my revo
xXUSMCGRIFFXx 11 months ago
What about taking an electronic speed control and finding the positive and negative wire from the easy start plaug,and connecting the positive and negative from the speed control to the 2 easy start harness wire that go right to the electric start motor....and then powering the speed control with a small lipo battery and plugging the speed control into an 3 channel or 4 channel reciver and hitting a switch on the controller sending power to the electric start motor witch will start the engine
MrMarksmanelite 11 months ago
why the white tie-wraps on the top of the engine?
morganko 11 months ago
HEFTY HEFTY HEFTY!!!!!111
topheryoyo911 1 year ago
thats pretty sweet!!!! im pretty sure the other people bitching are just fat and lazy and are jealous of your great ideas! haha
nyyfans8 1 year ago
I think it's clever but i bet that adds a shit load of weight
CSRacer72 1 year ago
Also to the poster, how would you know how it holds up? You've obviously never driven that truck let alone run the engine.
x65535x 1 year ago
If your engine dies that often you need to add a remote starter you need to learn how to tune your damn engine. Running an Ofna Hyper .21 3 port on my T-Maxx years back I could run for 30+ minutes without needing to restart.
x65535x 1 year ago
Its a good idea.But all that extra weight as mentioned before would drastically reduce Tmaxx topspeed from 45mph to about 30mph.Thinking about it not really so much of a good idea.
PimpThe478 1 year ago
this adds alot of extra weight, and the tmaxx 3.3 already has 3 servo's being used due to it haveing reverse. it looks good but thats allot of extra weight, you should have used a 9.6volt pack from a nikko r/c
devilsreject78 1 year ago
stinky stinky stinky stinky HEFTY HEFTY HEFTY HEFTY nice but it looks like to much stuff their
ch0l0sk8r 1 year ago
what about going threw water?...
RCdriver74 1 year ago
I think its a pice of shit. Lol nooo JKk verrry nice job dude,very smart,great clean cut all around wiring job and mounting. Excellent shit man great idea,have fun! 5*
demonsparkx 1 year ago
nice job looks nice and clean
kobracommader 1 year ago
0:29 steel sak
roscochickens 1 year ago
Got to check out my video on the ROSS System. Can't even tell I got a Remote start on mine. I even still have reverse and all the other channels. If you want your truck to still look stock... Check Out My Video... Hope this helps.
mrbillandshell 1 year ago
hmmm...now that's what traxxas needs to come up with next...an on board starter running off a small lipo battery or something lol
kilgoja 1 year ago
Friking awesome
72TROJANPRIDE 1 year ago
Ok faggot nice 4king mods.
PimpThe478 1 year ago
awesome! great idea!
67RcodeFairlane 1 year ago
wow.. thats really a nice clean way of doing it, rather than some other guys who hack it all in there..lol.. u did a really good job considering that it still has the factory plug...good work. keep it up.
davidrussorules 1 year ago
hey that is a great idea wow...
charmer492 1 year ago
Free advert mmmmm HEFTY ARE THE BAGS HA HA HA
v5mark 1 year ago
very cool
Sully20101000 1 year ago
nice my tmaxx hasnt run in like 2 years and i was cleaning and i saw my tmaxx 3.3 book and it instantly got me back into it i think im just gonna buy a whole new engine just so it will run good because i but like 5 gallons through it in the first year of owning it i got it maby in 2007
joeldude76 1 year ago
@joeldude76 that's is exactly how i got back into the hobby! i just found my model stampede parts and my old booklet and i got that feeling man i knew i wanted to get back into the hobby
CJLongoproduction09 1 year ago
Hefty, Hefty, Hefty!!!!!
rccrazykid 1 year ago
Hey berto123078, excellent enginuity, and creativity. Your video is one of the first remote start setups I even saw on youtube. Did you know that there is an easyier, and much lighter way to do remote start now? Check out "Ross on a Revo" - Right here on YouTube...
sbs9026 1 year ago
Comment removed
sbs9026 1 year ago
Really nice work budy!!!
Could you show or explain how to set up the remote!
Thank you
Arnol24George 1 year ago
@Arnol24George Check out "Ross on a Revo" right here on youtube.
sbs9026 1 year ago
Nice remote start. I got about 10% more hp from pulling off the stock airfilter and installing a KN style one from Autozone. If you would like more info please email me at cheesehead721998@yahoo.com Now it does crazy whelleys.
cheesehead721998 1 year ago
Nice remote start. I got about 10% more hp from pulling off the stock airfilter and installing a KN style one from Autozone. If you would like more info please email me at cheesehead721998@yahoo.com Now it does crazy whelleys.
cheesehead721998 1 year ago
Dude that is wicked
TRXtuner95 1 year ago
COOOOLLLL!!!
Mrtheguitarmaniac 1 year ago
Good creativity dude. send it to traxxas so they can see ya work.
RobDro76 1 year ago
too much w8 for jumping and that isnt made for that much impackt
bgj27030 1 year ago
thats the coolest thing iv seen on youtube
LAMBORGHINIDYL 1 year ago
wow thats very smart! good on ya
54645634 1 year ago
Cool idea but totally unnecessary and makes for more shit to go wrong when bashing.
NITROrcKing007 1 year ago
nice job ..
kc7wwy 1 year ago
Great video I did my remote start the same way it works great thx for the help I can still use my factory start and remote start. But couldnt find any heat shrink so I used electrical tape and Instead of cutting holes i used some sticky velcrow strips and put it on the easy starter, the battery box, and the servo bottom and top to hold everything down really good. This is best way to start a rc car!
rednck09 1 year ago
where you from?
tcy109 1 year ago
mate that is flipping wicked, great idea.
tommp5 1 year ago
thats sweet dude send this vid to traxxas and the new maxx might come stock like that lol
michaelbiri 1 year ago
cool and smart
StreetRacingRC 1 year ago
fuck yes man
jdmaryjane 1 year ago
i think i might do that but put the battery at the back so its more back heavey and dont effect it too much... or at the front to balance it out because mine allways tryes to do a backflip
hpitrophy 1 year ago
Kinda adds a little bit of weight don't ya think ? You do know that they have a new 'remote start' out fot the Traxxas vehicles don't you ? They showed it on R/C Car Action's(AirAgeMedia1) channel from the RCX Expo this year. ;-)
taz1175 1 year ago
nice shyt dude....can u put that on a jato 3.3???
therzlok 1 year ago
wow thats dope
elementguy98 1 year ago
cooooooooooooooooool
antotaekwondo9 1 year ago
Very nice idea, but I cant afford to lose my reverse.
BrothrBob 2 years ago
Comment removed
JAVIERGS01 2 years ago
hefty hefty hefty!!!
Tunknatar 2 years ago 2
that would make it alot heavier and off balanced.
timtim930 2 years ago
Wow sweet I need to do that on my revo
hemicuda98 2 years ago
Slick idea! I have the means to do that, but I'm not sure if I could give up my reverse. Anyway, for anyone interested eBay would be a great source for parts- used [and/or new] wiring harnesses, EZ start modules, etc. Anyway, neat to see how you went about doing that, it's very neat and clean without being complex. Good work
dietdew4you 2 years ago
and which shop you bought it
pachispredicador 2 years ago
and which shop you bought it
pachispredicador 2 years ago
my t-maxx hasnt looked that clean since i got it about 2 weeks ago
rednck09 2 years ago
Ook now I see it. Very nice and neat set up u have
dragracing3508 2 years ago
thanks for the comment.. but for me it's plenty fast enough don't need it to go 100 mph++++++ i haven't notice it any slower at all but it works great when ever it turns off just hit the switch and of i go :)
berto123078 2 years ago 2
@berto123078
Very good idea! i am doing that tomorrow!!!.. Shit matter of fact... let me go in the garage right now!! LOL
jesseandaprildyer 1 year ago
nice idea. but now your truck is heavier!
kenwoodprobes93 2 years ago
isint it heavy
idiot881100 2 years ago
This has been flagged as spam show
much was the t-maxx
pachispredicador 2 years ago
much was the t-maxx
pachispredicador 2 years ago
460
jkfnbkwjsn 2 years ago
nice
zooro96 2 years ago
teboo i'll make a video of it starting this weekend it's been kinda cold over here in nc
berto123078 2 years ago
@berto123078 you live in north carolina?
TheMrairsoftkid 8 months ago
would have been nice to see you actually start it
TebooTedMarshall 2 years ago
good job man
TMAXXKING555 2 years ago
sponsored by hefty!
Reezy71x 2 years ago
good one
traxxasfan321 2 years ago
cool, but way to complicated for me :)
marshallracing01 2 years ago
i don't need this truck to do 100 mph so having this pack doesn't affect how fast it goes will not to me it's plenty fast enough with this setup. and as to being lazy i don't really wanna spend my time going after the car and starting it every time it shuts off i rather hit a button and keep going thanks for your input
berto123078 2 years ago
Come on are you really that lazy? Them 6 cells are heavy too!!
mstreamer9991 2 years ago
lmao steel sak at 2:18
traxxasrc1 2 years ago
i thought the same thing
TheGreatIdeezy 2 years ago
good thinkin man just bought a tmax 2.5 for $75 and runs great about to use ur idea looks simple and easy
Randizle10 2 years ago
wonder if a 1600 mini-t pack will do the same thing??
trx1961 2 years ago
you sound like wilmer valderama lol
msg4lifesucka 2 years ago
lulz he does
techgeek5212 2 years ago
dude that is awsome man it really it clever to im going to copy u a little im going to do it just a little different but im going to copy u hope u dont mind very cool nice vid
hatchetman6669 2 years ago
wow that sweet can you tell me what you did cuz i want to that too so i was wondering if you could help me by telling me how to do it
my2boyz2002 2 years ago
thanks for the comment nitrorc4life but y buy another ez start if it already came with 1 i know it's smaller but then you'll be spending money on to make it remote start y not use what u have and just spend 5 bucks for the harness. the harness was used so the factory harness don't get cut when u want to remove the ezstart just unplug it :) i didn't feel like spending money on another ez start and battery i do and make with what i have it's cheaper lol
berto123078 2 years ago
HEFTY HEFTY HEFTY LOL COOL CAR MAN
biking022 2 years ago
well i just wanna say that this is sweet, but get an ez start 1 bc right now you have the ez start 2.. the nuumber 1 is just a small black peice that a batt straps to... instead of a huge casing around the batt.. also intead of buyina another wire harness, you shouldve take the stock one, cut the wires, soldered in more wire to extend it, then put on some heat shrink so you dont have such a mess.. JMO still looks sweet!!!! I might try it on my revo!!!
NitroRC4life 2 years ago
hey can u guys give me some ideas as too make a muffler extension so the side of the truck and right rear suspension don't get dirty from runing it any ideas is more then welcome thanks
berto123078 2 years ago
Thats cool. But it definitely will add weight. You will still pull wheelies all day long like you say. It adds weight so it might help to pull wheelies! but thats is really cool man i never had a remote start on my tmaxx. as u know i no longer have it but i miss it dearly...
JuicyFruitFresh 2 years ago
not that i notice i still pull wheelies all the way down the street :) i open the ezstart up and use clear sylecone sealer on the electronic board for water proffing some what :) but no change on performance at all
berto123078 2 years ago
Nice idea! But does the weight of the EZ-Start effect the performance of the truck much?
sidewaysbobdog 2 years ago
wow people only 1 comment i'm sad :( please leave me a comment on what u think on this setup thanks
berto123078 2 years ago
Good job, neat wiring too.
2far4u2c 2 years ago