hey cloud I did everything in the video and im still getting "there doesnt appear to be enough space on the disk to burn this image". So what am I doing wrong please help.
i have been reading all over the place to see if anyone else has had this problem but nobody has had it... my problem is when i try to update my ihas with the updates from firmware hq they wont work. When i go to run the updater it says it has encountered a problem and needs to close. Any clue as to why this is happening? BTW my drive is ihas 424 b.
Hi I have flashed Ihas 124B, after flashing the verbatim disc shown size 8.13 GB, but when ISO size itself is 8.5GB, at the time of burning image burn/clone CD both will ask for truncate or write till end of disc, is it safe to do that? i mean to say will the disc be OK?
@prash8910 clonecd will offer to burn to end the of disc but doing so would mean flashing was a waste of time as clonecd doesnt work (360 will boot the game but wont be fully safe online) imgburn should not say image is to big if it does then you havnt flashed properly.
@cloud41269 hi thanks for the reply. but if the file size of iso is 8.5 gb ( xgd3) and after flashing the drive any verb will show size of blank DL as 8.13 GB. then obviously it will show the size pop up message.
hi cloud41269, in have a problem .I have a 124 04 b lit on burner. i tried and tried to flash it with the new FW . And its saying cant flash with new up date FW .SO WHAT DO U THINK IS THE PROBLEM PLEASE HELP THANKS
@cloud41269 IF I DO EXACTLY AS U DO IN THIS VIDEO WITH THE DRIVED DIRECTLY HOOKED IN MY PC AND DO EVERY STEP TO THE PART WHERE U ARE GOING 2 BURN THE DISC I WILL HAVE HAD MY DRIVE FLASH TO LT MAX ?
Ahhh Gotcha! Yeh Img burn for me starts Slow, im guessing buffering? Or Lead-In? And yeh i guessed each folder was the Drive-Model and the info for it, But that sounds like rooting an Android, Unlock-Reboot, Full Access, soo 2nd Step was Back-Up And then flash, and then burn/verify?
Very Very nice video sir, Rather well done, Nice watermarking, should give you credit now for the hard work and stop people dupeing and sharing it like it's theres xD,
Nice Video though, Small question, whats with the slow start? was that the burn process or Verify?
noob Question here but what was the first app you used? "IHAS" is that the Drive Flasher? as you did the back up after that and wasnt sure.
@stan464 the slow start was getting ready to burn the image, could be cause i selected x2.4 speed or it could be natural im not used to using imgburn. The 6 folders you saw was per model and i chose mine, inside is what allows us to write new firmware at a guess, unlocking it and then rebooting for better access.
hey cloud I did everything in the video and im still getting "there doesnt appear to be enough space on the disk to burn this image". So what am I doing wrong please help.
bolt2384 2 weeks ago
is this cloudshadow?!
warriortweety 2 weeks ago
I/O ERROR
DEVICE [O:O:O ] ATAPI IHAS124 B ALOS (E:) (ATA)
ScsiSTatus: oxo2
Interpretation: check condition
CDB: 2A 00 00 01 38 40 00 0020 00
Interpretation : write ( 10) sectors 80704-80735
sense area : 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00 00 00
interpretation : invalid Address For Write
Help please!
skull495 1 month ago
can you convert an ihas124 c to ihas124 b?
YourBaybeezDaddy 1 month ago 3
Comment removed
messagieling 1 month ago
Comment removed
messagieling 1 month ago
Hey, need some help, i flashed my Ihas124 B and i still get the "Truncate or Overburn". What's the problem?
Dounten 1 month ago
when i try to flash it gives me a flash error why? i have an ihas 324b
opticinf3ction 1 month ago
i have been reading all over the place to see if anyone else has had this problem but nobody has had it... my problem is when i try to update my ihas with the updates from firmware hq they wont work. When i go to run the updater it says it has encountered a problem and needs to close. Any clue as to why this is happening? BTW my drive is ihas 424 b.
hockyplyr95 2 months ago
I have bought a liteon iHAS124 A
No wonder it wasn't working rip off!
ElTexMexAlex 2 months ago
hay cloud i am geting this message when i tried to burn a cd its reads I/O ERROR
DEVICE [O:O:O ] ATAPI IHAS124 B ALOS (E:) (ATA)
ScsiSTatus: oxo2
Interpretation: check condition
CDB: 2A 00 00 01 38 40 00 0020 00
Interpretation : write ( 10) sectors 80704-80735
sense area : 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00 00 00
interpretation : invalid Address For Write now i have no idea what it means . please help thanks
skullbasherrank1 2 months ago
@skullbasherrank1 do you get this error with everything? game iso, dvd iso etc?
cloud41269 2 months ago
dude you suck for not putting a link
pman0215 2 months ago
Hi I have flashed Ihas 124B, after flashing the verbatim disc shown size 8.13 GB, but when ISO size itself is 8.5GB, at the time of burning image burn/clone CD both will ask for truncate or write till end of disc, is it safe to do that? i mean to say will the disc be OK?
prash8910 2 months ago
@prash8910 clonecd will offer to burn to end the of disc but doing so would mean flashing was a waste of time as clonecd doesnt work (360 will boot the game but wont be fully safe online) imgburn should not say image is to big if it does then you havnt flashed properly.
cloud41269 2 months ago
@cloud41269 hi thanks for the reply. but if the file size of iso is 8.5 gb ( xgd3) and after flashing the drive any verb will show size of blank DL as 8.13 GB. then obviously it will show the size pop up message.
prash8910 2 months ago in playlist Favorite videos
thanks , i will try to do it . i will let u know if it works thanks
skullbasherrank1 3 months ago
hi cloud41269, in have a problem .I have a 124 04 b lit on burner. i tried and tried to flash it with the new FW . And its saying cant flash with new up date FW .SO WHAT DO U THINK IS THE PROBLEM PLEASE HELP THANKS
skullbasherrank1 3 months ago
@skullbasherrank1 check bios settings and make sure your set to ide mode and not ahci and raid
cloud41269 3 months ago
@cloud41269 Thanks a ton, friend. Wouldn't thought of that myself. I was getting desperate :)
janpacuta 3 months ago
Comment removed
mike23456789101112 3 months ago
i keep getting an error when i go to write flash. thoughts?
rap27uwf 3 months ago
@rap27uwf model may not be identical? or ask c4eva and group in their irc channal.
cloud41269 3 months ago
@rap27uwf you have to change your computer setting to IDE mode i had the same problem and it worked you could change it in your bios
xSniperGod 3 months ago
@xSniperGod thanks bro
rap27uwf 3 months ago
nice video,
one question:
do i need to tick opc in settings if i use 2.4 writting speed?
TheJohnySyros 4 months ago
@TheJohnySyros not for 2.4x speed no, its for 4x
cloud41269 4 months ago
@cloud41269 ok, thanks
TheJohnySyros 4 months ago
yeah most likely slow to prevent errors. Yep exactly like that.
cloud41269 4 months ago
@cloud41269 IF I DO EXACTLY AS U DO IN THIS VIDEO WITH THE DRIVED DIRECTLY HOOKED IN MY PC AND DO EVERY STEP TO THE PART WHERE U ARE GOING 2 BURN THE DISC I WILL HAVE HAD MY DRIVE FLASH TO LT MAX ?
mike23456789101112 3 months ago
@mike23456789101112 yes
cloud41269 3 months ago
Ahhh Gotcha! Yeh Img burn for me starts Slow, im guessing buffering? Or Lead-In? And yeh i guessed each folder was the Drive-Model and the info for it, But that sounds like rooting an Android, Unlock-Reboot, Full Access, soo 2nd Step was Back-Up And then flash, and then burn/verify?
stan464 4 months ago
Very Very nice video sir, Rather well done, Nice watermarking, should give you credit now for the hard work and stop people dupeing and sharing it like it's theres xD,
Nice Video though, Small question, whats with the slow start? was that the burn process or Verify?
noob Question here but what was the first app you used? "IHAS" is that the Drive Flasher? as you did the back up after that and wasnt sure.
stan464 4 months ago
@stan464 the slow start was getting ready to burn the image, could be cause i selected x2.4 speed or it could be natural im not used to using imgburn. The 6 folders you saw was per model and i chose mine, inside is what allows us to write new firmware at a guess, unlocking it and then rebooting for better access.
cloud41269 4 months ago