Homemade Advanced Airgun / Air Gun FIRING!

[blackpearlfan01]

thats not an advanced airsoft gun thats a friggen leathel weapon

[TheOneleggedbastard]

At about 3:26 you see that there is a hole in the wood from the back on the plywood. It is seen just for a moment but come on...

The words said during all fakes "this is not fake"

[SMJeOma]

get some distance dude xD

[ramicaza]

holy crap

[azuredragooz]

that looks like it could be on fallout new vegas as a home made weapon

[buffmann91]

@azuredragooz thats just what i thought lol, like bonus critical damage against armour or something!!

[verycuteboy]

what pressure did you use?

[NAUTLIS571]

12bar, but if u live in the US, look up a converter on google and itll convert bar to psi for you

[NAUTLIS571]

approx, 174psi

[Crash29930]

@NAUTLIS571 +1

[ParkWayDrive011111]

dayumm

that was sick good job

[nopju222]

nee,hehe ik wil hem ook niet namaken,

maar ik vroeg me gewoon af waar je de spullen van daan haalt voor al je airguns..

het gaat niet specefiek om deze........

[Crash29930]

De doe-het-zelf winkel om de hoek :). Echt waar.

[nopju222]

omdat je me mischien kan vertellen waar je de spullen vandaan hebt,omdat ik er zelf ook een aan het bouwe ben?:)

[Crash29930]

Nee, dat kan ik niet doen met deze airgun.

[nopju222]

are you dutch?/ben je nederlands?

gewoon omdat je zij dat het met ''dutch'' parts was gemaakt.......

[Crash29930]

Wat is het praktisch nut van deze vraag? :D

[klskatesite]

damn

[thefarmer32]

what is your operating psi?

[xmxzmx]

as i toled ya ! if u diding got it here it is !

1st:how to make the air gun really air tite

2nd: the way that i put the air in is not air tite its leaking so i need some tips from u :) plz

[Crash29930]

Use superglue.

[xmxzmx]

crach crach do u know somthin !? u are amazing but :s i need ur help

[CBDHProductions]

did you get that video i sent you

[Crash29930]

Just upload it on your own channel.

[CBDHProductions]

1. what is your air source

2. what size is the barrel

3. what is the air tank made out of

4. where do you get ball bearings that big now

[Crash29930]

1. An air compressor

2. Barrel size: 15mm outside and around 13mm inside.

3. Its a fire extinguisher.

4. Ball bearings are used for mechanical connections. If you go to a bike shop, or a car dealer for example, ask where you can the ball bearings with your desired diameter. They can tell you where you can get them.

[CBDHProductions]

what size is the ball bearing

[Crash29930]

It fits exactly.

[CBDHProductions]

i got a gun like that similar ball valve system

i can understand the trigger and you not able to get sprinkler valve

[FighterAceee]

damn man where do you get your ball bearings?

I've been to every tool shop in the city and I just cant find them.

[Crash29930]

They are often used at school for science projects and last time I found some perfect ball bearings in cheap toys (magnets and sticks).

You can buy them as well. I recommend you to search for "buy ball bearings" in google.

[spudinator1]

i'm sure you already know but you can make your own piston valves for very cheap but with a cannon of this size your method is much easier to make

[blueskull360]

what psi do u shoot @?

[Crash29930]

200

[blueskull360]

not that hard to make...

[headshot8000]

well from 2 fuckin feet away yah itl go threw anything

[Crash29930]

Just perfect when somebody breaks into your house... It will shoot through anything.

But I don't have the space to shoot it at an open range.

[firebellySOLO]

i have one also and it sucks when theres not much room to fire it i wish i live in a forest

[Crash29930]

Yeah me too.

[spudinator1]

it doesn't make much difference in fps from 2ft to 50ft so stfu

[MatthewAbs]

That is pretty cool

[agvoetsek]

hey im just wondering how ur guns loading system because with my gun if you put ball bearing in they instantly roll outif the barrel is too low.

[Crash29930]

squize the barrel where u want the ball bearing to stop, if you put it in, it will get stuck there.

[kevinbrzezowicz]

Put some thoght in to it and make a gun you can be proud of..This one needs work..Looks wise. Refinr the design and it would look Kick ass!!

[Crash29930]

It already kicks ass in my opinion, heres another movie about this airgun:

/watch?v=ylE6K6GaYno

[Divinioo]

Hoe heb je de trekker gemaakt?

ik ben ook met 1 bezig maar het enige probleem is dat k niet weet hoe k in 1x alle lucht eruit kan laten schieten. kan je misschien helpen?

[Crash29930]

Nou als je naar mijn eerste filmpje kijkt dan zie je een heel simpel mechanisme. Deze is het zelfde alleen zit er nu een houten blok omheen en meer elastieken.

[Giggyjunior08]

Hey crash you should make an automatic air gun it would be really good

[Crash29930]

Already did that, It is the gun u see in this video. It can spray ball bearings but it loses a lot of power.

[Giggyjunior08]

Oh ri u should make a vid showing it firing automatic it would be still good even with the decrease in power

[Crash29930]

Ill think about it.

[thang2005]

so is the recoil strong?

[Crash29930]

No, air pushes the air out more ''gently'' than gun powder. But it does have recoil and it would be bigger with a bigger airtank. But airtank size doesnt make much difference in firepower.

[Peterditaa]

Please !!! give me a list of materials!!! i need that gun its the best working gun i know!

(send the list to my account! Please!

[Gunfun911]

oooh oke =p

nuuu snap ik het xD

dANKJE!

ik ben bezig met het make4n en gebruik een tuinslangspuit ((weetrjewel dat uiteinde)

om de lucht te bevrijden, ik heb nu alles, alleen nog even in elkaar zetten!

5/5!

[Crash29930]

Bedankt voor het raten!

[Gunfun911]

hoe werkt die lader nou?

ik kan het nergens vinden :P

[Crash29930]

Ga naar 0:29: Ik doe dat kogeltje in een grote gaskraan en als ik die open en dicht doe valt het kogeltje er in en word alles weer geisoleert.

[Gunfun911]

dat bedoel ik niet, ik bedoel hoe dat kogeltje blyft liggen op die plek zonder dat het wegrolt!

=p

ik ben ook gewoon moeilijk!

[Crash29930]

lol, Ik heb een druppeltje secondelijm er in zitten die zorgt dat de kogel wel door de loop kan maar met kracht en niet zomaar.

[55hamsterman55]

fast and powerfull :)

I love it

[musicmac00]

thats more of a sniper rifle than a gun...

[fishyfish777]

marbles - slingshot ammunition would work as good, correct?

[Crash29930]

Its all about weight and speed. An iron marble would penetrate far more than glass.

[pentaerytritol]

okk, tank's ^^

[svengali1337]

damn, im to far into mine to put a second ball valve in :( you should of told me sooner!! >:(

[svengali1337]

so basicaly its just a second ball valve?

[Crash29930]

Haha yea. thats all.

[pentaerytritol]

hey, you can only shoot once ?

[Crash29930]

No, If you connect a big airtank with a hose to the gas connector you can feed it air to shoot more than once.

[svengali1337]

1) is it connected to a automatic pump

2) how the hell did u make that thing were u put the prjetile in, i really want to no, woudnt that lose airpressure?

3)explain trigger system

4)please relpy

[Crash29930]

1) Yes It is, but I can use a handpump too.

2) You have the barrel, add a T-piece between the beginning of the barrel and the actual airgun. Now you need to connect a big ball valve upon that T-piece. Just put a ball bearing in and open + close to take the ball bearing and close it again.

Triggersystem is the same as in my first video. It just has a safety block.

[greatliar123]

how do you make the ball bearing stay in place? i mean when you slantdown. tips please.

[Crash29930]

Use a tool to bend or narrow the pipe. and the ball bearing will get stuck. Just squize it a little.

[linkdob13]

..........wtf...cool

[wmashda3000]

hey can you shoot it at a brick or something, that would be soo awsome.

[Crash29930]

hmmm, good idea.

[sk8tertje8]

hmm gwn een bal valve dus met een kogeltje er in die gaan wel goed open dan kan de lucht er in 1 keer uit

[sk8tertje8]

lol nice ik heb ook een airgun weet niet percies hoeveel psi maar hij shiet door 5 mm staal lijkt me best goed ik heb de tank van een ijzeren kruik. maar ik werk in de teckniek dus ik maak de kogels meestal zelf op een draaibank:)

[Crash29930]

wow, netjes. ik ben ook van plan om in de techniek iets te gaan doen. weet jij wat voor soort gaskraan het snelste opent?

[abuttononwheels2]

have you ever thought of making guns for a living?

[Crash29930]

I can't  sell this stuff!

[55hamsterman55]

how did you make it i need to know!!!!!!!!!!its deadly

[Crash29930]

indeed, its deadly. thats the only reason why I don't tell how to make it.

but it isn't so hard, thrust me.

[XxDeathDemonxX]

OH MY JESUS HOLY SHIT THATS SCARY

[xPIVOTxMANx]

my pellet gun can do that but i bought it at a store lol

[loveboardernumber1]

HOLY SHIT!!! thats bad man......can it shoot AAA batteries???

[Crash29930]

never tried that... if they are 13mm i can shoot them.

[loveboardernumber1]

even better AA batteries... mine shoots at 10 psi AA,s hard enough to shatter your skull

[Crash29930]

...lol I think you mean 100 psi instead of 10 they wouldn't even come out of the barrel.

and the yellow ball bearing in this video is shot hard enough to enter and exit a thick plywood plate. a skull is made of pretty weak material compared to that. It would probably enter and exit a human head. it can only be stopped by the brains.

[armatold]

sick!!though my gun does that...after i fix the leak caused by 200PSI a pump up (teared through the PVC glue!!!)

[We6t9eR]

FUCK! that tile got owned to shit.

nice gun, you hunt some birds or something:P

[Crash29930]

hehe, I know what sound that would make.....

SPLAT!

nah im not going to do that lol.

[armatold]

you just cant! u'd get busted for illegal weapon possesion...right?

[Crash29930]

true

[hazza0224]

who needs a drill when u got 1 of those

[grotewaard234]

Nice 5/5

waar haal je trouwens die 14mm kogellagers?

[Crash29930]

bedankt voor het raten.

die kogellagers... lang verhaal. ik stuur het wel.

[metalboy203]

damn man

[Andozslf]

Excellent

[chuckyvnisv]

How many pounds puts?

[mrbadx19]

would like to know what pressure you're working with. i shoot potatoes at stuff from about 20 meters with good results, might make a pneumatic spud gun for fun next.

[Crash29930]

i made a spudgun b4 on propane gas, it shot extremely hard. but airguns are better because their far more accurate and deadly.

especcialy this one.

[OUTSIDER01]

looks powerfull but the CD casing and the tile are no challenge for your gun.

[Crash29930]

nope, the tile was a challenge for the ammunition, the ball bearing was completely deformed.

[mrbadx19]

i could break that tile with half a potato at probably 10 meters with my combustion gun

[ban0003]

u can get a speinkler valve at garden world in australia

[Crash29930]

00:28, I live in the netherlands

[ban0003]

ebay gotter to have 1

[molomono]

If you live in the netherlands like me i can see why you cant shoot it at far distance :P and could you put up instructions on this masterpice becaue im planing on making one and this is by far the most awesome i could find

[molomono]

i meen a cunstuction video :P and were do you buy your amunition and components?

[ban0003]

where do u put ur ammo

[phoenix546]

do yourself a favour and upgrade to a sprinkler valve or piston valve mate. I can sink a marble about 1.5cm into a tree at 80psi from 20meters back with my marble rifle, apart from that good vid I liked the dmg:)

[Crash29930]

I just wish I had a piston/ sprinkler valve :(

it would be awesome if i could get one... I do not live in america...

[chowmein33]

ahh that thing looked like it was a murder weapon when it first came up

[derjew]

DUDE wtf! That owned the plywood! I have an airgun, a very nice one, but it doesnt shoot the caliber yours does so I cant put fat steel balls in it. I can and have make zinc bullets that make a half inch hole in concrete and bend the bullet in half in the process, but I dont think I could do this. How many psi are you running this thing? If its only 100 then that must be a heavy projectile!

[Crash29930]

it is most effective at 140 psi which I use in this video.

it is completely made of steel so it can probably handle 200 psi and more but the gascrane starts to struggle(regular ballcrane)

at such pressure. I cant get any other gascranes here in holland.

I use brass and steel ball bearings which are 13 millimeter in diameter (little more than 0.5 inch)

[mrtophatman]

yeah, nice but try farther than point blank range, see how accurate and powerful i is from farther out

[t8b5o4s1k]

that was pretty cool. have you ever tried it at longer distances

[winiwano]

look mine ...it isnt better than yours....but a least its nicer ;D...great job

[HDS2468]

Nice GUn, If you wanna you can check some of mine out.

Anyway Nice gun.