ICS MP5-SD6 High Speed Testing -ASTKilo23-

[airsoftrules987]

hey im thinking of getting one of these could you tell me a a few things to upgrade this gun for around 150$

[ASTKilo23]

@airsoftrules987 try running it stock for a while and see how it does. if you still want to upgrade, send me a personal message.

[airsoftrules987]

@ASTKilo23 alright thaanks!

[H4nz08]

Would you be willing to make a video on how you packed the silencer with acoustic foam?

[ASTKilo23]

@H4nz08 just unscrew one of the ends and insert felt or foam. that easy.

[odst201]

in canada its hockey tape hahaha

[OgaleeBoogalee421]

i dont think i would like to airsoft against you

[ASTKilo23]

@OgaleeBoogalee421 well you should check my a&k m249 powered by an 11.1v lipo...your opinion would be definitive.

[TheTacticalAirsofter]

My friend's dad is insanely stupid/funny. He took his li-poly ready KWA and hooked it up to his car battery. It fired 96RPS. Freaking beast. Oh and he changed the battery on his to a bigger one i don't know the voltage but he has a Tahoe and it has a TV and an Xbox in it so its bigger so it can power it.

[BlueFlamingSword1231]

sounds like a freakin chainsaw!

[djrees77]

Insted of the high speed motor I use a high torque motor and high speed gears coupled with a 10.8 or 12v battery. Great trigger reponse.

[ASTKilo23]

@djrees77 that is actually a really good idea. i may have to try that in a future gun project.

[tacticalairsoft65]

if you had high speed gears how long will it take for you to strip a teath or piston running around 25rps...my piston has metal teeth but the body is poly carb

[TheTacticalAirsofter]

@tacticalairsoft65 It depends if your shim job is good if it is it will last a long time and if its not, its gone.

[SpaceCowboy5555]

hey man, i thought that if you had bearings on the spring guide, you dont have to have the bearings on the p head. so therefor, you can have a lighter p head. if im wrong, please explain how im wrong. but i dont see the point of having bearings on both.

[ASTKilo23]

@SpaceCowboy5555 you are correct in that you dont have to have bearings on both. however, i have found that having a bearing piston head and spring guide makes it so that the spring is sitting in an equalibrium and will NEVER bind.

[Operator863]

a non airsoft question! *gasp*....what song is at the beginning of this vid, is sounds really cool. great weapon btw. you helped me get a JG M99 for my extra BAR10 slam fire fix. goooood job

[ASTKilo23]

@Operator863 its called "orchard of mines" from an album called "epicon", not sure of the artist.

[CCourter16]

What brand of midcaps do you use for your mp5? I have a similar rof and was wondering if MAG midcaps would feed fast enough?

[ASTKilo23]

@CCourter16 i actually tend to use high caps in my mp5 seeing as they feed better than most midcaps at might rates of fire. i usually use MAG brand midcaps.

[kurdt494junkie]

You should get a drum mag!!!!!

[ASTKilo23]

@kurdt494junkie electric drum mags do not feed fast enought to keep up with this guns rate of fire.

[ArcticFilmsCorp]

@ASTKilo23 then get a winding drum mag.

[airsoftman0]

nice job man

[cjboi204]

whats the FPS of your gun?

[ASTKilo23]

last time i chronoes it, it was shooting about 290fps. bit since, i have switched out a few parts and added a tb barrel. in theory, it should be shooting about 300-320fps.

[58ross58]

where did you buy this gun from ive been wanting it and i just wanted to know:)

[usmcsniper92]

you know what high speed guns may burn through ammo and pistons like no tomorrow, they are the best to have IMHO...I have a KWA M4 shooting 34-36 RPS and to be completely honest I have ran it on over 20,000 rounds with no piston failures yet! Now that ive said that itll break tomorrow but O well, had fun with it...I also have it running a G&P White piston...really good for high speed

[rainbownut1235]

nice

[edna0121]

What happened to your modify gears ? You mentioned you were using CA gears in this gun.

[ASTKilo23]

i actually jsur recently reinstalled th modify gears in this gun. the reason being: for some reason, no idea why, the sector gear tends to decrease the amount of time it takes for the piston to fully strip out. i might be because one side of the sector gears teeth are smoothly slanted and dont interact with the piston teeth well. so far it has stripped 2 pistons and damaged one other.

[TriPplT8314]

i don't see no miss feed on that gun, and maybe he doesn't want a gun that shoots slow.

cool gun ASTKilo23

[PossessedDonutz]

Thats interesting. But why do you want something that chews up ammo that fast, and possibly move too fast for each bb to load?

[ASTKilo23]

it may be ridiculous and cost a lot to maintain, but its absolutely awsome to use.

[njchiller45]

holy fuck!!!!!!!!!!!!!!!! thats faster then one of those minigun airsoft guns

[l33tkawasaki]

Nice Buzzsaw you got there :P

[billyluds]

hahaha u turned a mp5 into a mini gun

[airsoftmasta102]

0.o amazing

[gamemaster1199]

O.O

[22bjonah]

damn!

[Viper23008]

lmao scary sh!t