you are a fuck tard, no one sells blasting caps, because they explode. you have to make them yourself. and a fuse wont do shit to anfo exept heat it up a little and make it smell like sulfer
Ammonium nitrate and 'nitro fuel' (nitromethane) is ANNM. Pretty much the same but more powerful and easyer to detonate. And no, it will never blow up while making it.
Omg and that technically wasn't contained. the only thing to give any pressure to the deflagration would have been the sheer amount and the mud and the plastic bag slightly. If that had been put into a strong metal container of some sort and then put into the mud... it would have been twice as big. That's incredibly impressive for the small amount of confinement.
yeah, of course it detonates but confinement of any explosive in a metal canister or something of the like nearly always makes the explosion more violent.
still, HE has such high bristance that it will pulverize the container before you get any pressure at all. LE makes the bang by slowly make more pressure in the canister and then cause it to rupture and release all the pressurized gas at once
yeah true but any resistance applied to any explosion will cause a more violent explosion. It's physics. there is a state where the matter cannot gain anymore initial velocity from extra resistance but this guy has come no where close to that point. That point is only reached in massive supernovas and other celestial explosions.
never mind I don't think you will ever get it. Looks like you didn't read my last comment. There are a couple of laws of physics that when put together state that any kind of resistance applied to any kind of decomposition/explosion will cause a faster release of energy up to a certain point. it doesn't matter how small the difference is but it's always there except in extreme cases where it reaches the maximum, like that of supernovas.
you are right I over exaggerated there, the video got me excited. fair enough, I did in my first comment way over exaggerate the effects confinement would have upon the decomposition. Was a good discussion though. Thanks.
Yep, about 6% fuel and 94% fertilizer. The thing is, it has to be *specifically* Ammonium nitrate, NH4NO3, or it wont work at all.
The thing is, even if you have the right fertilizer, you have to have an explosive charge to set it of with in the first place, 'cus its so damn insensitive.
all you need is a grill igniter to set it off make a spark gap make sure its in the center of the mixture get a roll of wire hook it up press the igniter switch bam
I found this stuff in the hardware store called "spirit of salt" i looked it up on wiki and it turns out its HCl. it says WARNING EXTREMELY CORROSIVE!!! and other warnings. I was wondering if its concentrated enough to work for TATP. No harm in trying i guess?
I have a good knowledge of explosives and i know how to desensitise primaries the only reason i prefer sulfuric acid to other strong acids is because it can be used to make much more than TATP. you can make Nitric acid from which you can then make: RDX, Nitroglycerine, TNT, and all kinds of nitrates!.Im not dumb, i just like sulfuric acid, its much more than a catalyst! Also, dose anyone know where to get benzene?
Hmm.. I STRONGLY reccomend you to reaserch befor making any HE's!!!! You will end up dead if you keep proceding this way! Unstable primarys is not the explosives you start with when you don't have basic knowledge on the subject!
I live in a country where they dont sell sulfuric acid on every corner so it is difficult for me to make a sensitive explosive. What can i use to make a good detonator. I have tried TATP but it dosnt work without sulfuric acid. HELP ME !
Well.... I ain't saying this to be bitchy, BUT! If you cant find out how to make AP without H2SO4, then i sugest that you stay away from HE's untill you have MORE knowledge!
do they have a brand of toilet bowl cleaner called "the works" or if you can get your hands on muratic acid that would work too you can replace the sulfiric acid with these
Mercury fulminate is a primary with which you can make a detonator. ANFO is quite difficult to detonate, so you will need a booster charge (explosive which can be easily detonated by a detonator). In theory you could use MF as a booster but that is bloody dangerous, because of the sensitivity of MF to friction and spark in dry form.
Well.. If you have researched "this stuff" briefly, i would say that you are one shitty researcher.. :P
But since i am so kind, i can give u the answer:
NO..! NO LE's will detonate "this stuff".. If you read trough the comments on this or some of my other videos, you can see the answer mentioned several times..
I know. I was just making fun of the quality of some comment boards here, regarding explosives. People always think of explosives as a gunpowder, or flash.
do you have to wait a certain amount of time after putting 6% kerosene in it or is it ready right away and can you use a flash powder filled co2bomb in a toilet paper tube would that work for a blasting cap or do u have to use apan and then u use electric ignition so you dont die
well.. :P long time since the blast now :P I really cant remember.. but i would say 40-60 cm.. See on the video, when sir wank'alot places the charge it is almost at the bottom..
Not really, ANFO isn't that hard to make, now being able to detonate it and not kill yourself is another story, depending on how much you make of course.
ofcourse. As i meant it: to make, and detonate it. You have no interest of just making it.. And therefor you will need "tons of experience and knowledge"
Well i have been playing with aP for along time, experimenting with it and it's getting old. If let's say i use 300 Gram's of AN the right mixture of FO would be like 3.0 Grams of it ? i know FO is Liquid im just giving a example.. ?
Np, im new to the HE stuff but i know some stuff about pipebombs and stuff. I wanna fill a like 20-25 cm long c02 cartridge with annm and detonate it with hmtd.
Ok, But i recommend that you read and read and read before making any HE. And start with small amounts first. Specially when it is unstable primary's like HMTD.. And you do not need confine it.
anfo is simply amonium nitrate and fuel oil. you can use diesel for the fuel oil or keresone or even nitromethene. Anfo itself is highly explosive but difficult to detonate (as ive heard) i have not tried it and im not sure how to det it.
No it isnt safer then tatp there both very unstable and unreliable shaw it gose booom ,but you will be crying like a bitch if your hand gets blown off find a better safer alterentive to organic peroxcides.
hightimees: You are rigth. All your allegations are mostly rigt. HMTD is relative safer than AP to handle, but none of them are safe. And yes, i would probably cry like a bitch if my hand gets blown of! And yes, another alternative would be appreciated. But the thing is that TATP and HMTD is cheep, easy and fast to make. And they do their job.. So. Until i get more and different chems, i will make organic peroxides.
Same here. I don't want anyone to get hurt. Safety is the first thing we think. The Explosive is never stored, the detonator is made rigth before blasting, the detonator booster and main charge is transported in separate bags, with distans between. Battery, cam and stuff like that is also in another bag than explosive, booster or detonator. The wire is connected to the detonator first, (away from booster and main charge) then the detonator is put in boster, and booster in main charge.
And then the wire is connected to the firing box, the area is checked an secured. Then we warn with 3 loud shouts. "fire in the hole/fyr er det her/varsku her etc.." And then the blaster take an overlook at the blasting site, an after that he counts down, (loud) 3, 2, 1.... Boom :P This is our normal procedure before any blast.. (well, not the smallest ones, but you get the idea.. ;) ) Thanks, i must say the same :P I did not expect the blast to be that big. Well well, Take care :D
3nikostas: Don't know.. Tell me if you ever find it.. :P
Seriously, do you think that you can just go to some shop and buy APAN? APAN is Acetone peroxide and Ammonium nitrate, AP can be made, and AN can be bougth.
No, i did not use HMTD to detonate it.. I used a 600g APAN 10/90 charge as booster, and a 1-2g APAN 70/30 as blasting-cap.. or something like that.. i dont really remember the ratios on the cap..
Mor og far eg ikke så veldig begeistret over proskjektene mine, men de sier at så lenge jeg jobber sikkertog ikke gjør hærværk (som jeg personlig hater at folk driver med!!!!). Og det Akter jeg å fobeholde..
OK I can do that :P Do I need anything special to detonate it after i've dissolved the ammonium nitrate into the gas or is it ok just as is in a gas can or something?
Yes. You will need someting powerfull to detonate it..! like APAN. if You read all the comments on this and the 1kg ANFO underwater video, you will find what you will need of info. (The FO is just blended in the AN)
As said many times on comments and even in the beginning of the clip, i used a 600g 10/90 APAN booster charge to detonate the ANFO. And to detonate the 600g APAN booster i used 1-2g 70/30 APAN blasting cap.
alright, i know Australia is ultra strict on these sort of things so i was wondering if there was some or of product or place. even nurseys no matter how big or small don't sell it.
detonator acetone perokside ap ? g-?
vvyyttaasss 1 month ago
That's the fun way to make a fox hole.
WeaponSamurai 1 year ago
HOLY ZOMBIE KILLER!!!!
WeaponSamurai 1 year ago
Where the fuck do you live because im about to move there!
griffin66441 2 years ago
norway XD
snuffying 2 years ago
norway ;)
Etabl 2 years ago
why do you want to move to norway? karn må jo være hautullat.
anton854 2 years ago
So i can blow the shit out of stuff!!! lol
griffin66441 2 years ago
looks like you blow away all the mud xD
Ralleg100 3 years ago
GOD..
STdkJP 3 years ago
explosions make me horny
rltw04 3 years ago 3
haha! rema pose...
chxitout 3 years ago
mud shower!!!!!!
fucktheusa00 3 years ago
4 KG!!!! WTF?!
madredchris 3 years ago
can u use black powder to detonate anfo, like a co2 canister bomb, or pipe bomb 4 a primary? or do u have to use something more powerful like ap?
leadsled454 3 years ago
blackpowder doesn´t work!
09162343 3 years ago
isant it just ammonium nitrate and rc nitro fuel? can it blow up when you make it?
sledding18 3 years ago
noo that is a very safty explosive
09162343 3 years ago
This comment has received too many negative votes show
could i use a fuse or a sparkler as detonater cuz in holland they dont sell blastingcaps
koevis 3 years ago
you are a fuck tard, no one sells blasting caps, because they explode. you have to make them yourself. and a fuse wont do shit to anfo exept heat it up a little and make it smell like sulfer
crazy1russian 3 years ago 3
Ammonium nitrate and 'nitro fuel' (nitromethane) is ANNM. Pretty much the same but more powerful and easyer to detonate. And no, it will never blow up while making it.
o0Dreamlike0o 3 years ago
is there AN and glycerine?
RicardoGarciaPino 2 years ago
do u have to use fuel oil or can u use nitro rc fuel? if so what one will work better.
tntskull 3 years ago
you can use both but rc fuel is a little much better because the nitromethane
09162343 3 years ago
alot better lol believe me
gupnup 3 years ago
Omg and that technically wasn't contained. the only thing to give any pressure to the deflagration would have been the sheer amount and the mud and the plastic bag slightly. If that had been put into a strong metal container of some sort and then put into the mud... it would have been twice as big. That's incredibly impressive for the small amount of confinement.
good job!!!
tomandjj 3 years ago
HE don't need confiement since it detonates.
poljaris 3 years ago
yeah, of course it detonates but confinement of any explosive in a metal canister or something of the like nearly always makes the explosion more violent.
tomandjj 3 years ago
still, HE has such high bristance that it will pulverize the container before you get any pressure at all. LE makes the bang by slowly make more pressure in the canister and then cause it to rupture and release all the pressurized gas at once
poljaris 3 years ago
yeah true but any resistance applied to any explosion will cause a more violent explosion. It's physics. there is a state where the matter cannot gain anymore initial velocity from extra resistance but this guy has come no where close to that point. That point is only reached in massive supernovas and other celestial explosions.
tomandjj 3 years ago
it is not resistance that cause HE to decompose faster, it is the density AkA how hard it is pressed
poljaris 3 years ago
never mind I don't think you will ever get it. Looks like you didn't read my last comment. There are a couple of laws of physics that when put together state that any kind of resistance applied to any kind of decomposition/explosion will cause a faster release of energy up to a certain point. it doesn't matter how small the difference is but it's always there except in extreme cases where it reaches the maximum, like that of supernovas.
tomandjj 3 years ago
yes but you wrote "TWICE AS BIG"
poljaris 3 years ago 3
you are right I over exaggerated there, the video got me excited. fair enough, I did in my first comment way over exaggerate the effects confinement would have upon the decomposition. Was a good discussion though. Thanks.
tomandjj 3 years ago
lol no probs
poljaris 3 years ago
must it be a hard metal container or a coca cola container will do the job ?(sorry for my english)
aneanthesieus 3 years ago
how do u gfet acetone peroxide and how do u set that off?
54spiritedwill54 3 years ago
if you dont know about the struff you shouldnt make it.
its high explosive and will detonate VERY easily.
nukyis 3 years ago
What did you use to detonate it?
good2you1128 3 years ago
That was so loud even the camera went deaf!
thekiwicanuck 3 years ago
I'm a bit confused. Is it just high nitrogen fertilizer and diesel fuel?
CptIncaino 3 years ago
Yep, about 6% fuel and 94% fertilizer. The thing is, it has to be *specifically* Ammonium nitrate, NH4NO3, or it wont work at all.
The thing is, even if you have the right fertilizer, you have to have an explosive charge to set it of with in the first place, 'cus its so damn insensitive.
anon32016 3 years ago
all you need is a grill igniter to set it off make a spark gap make sure its in the center of the mixture get a roll of wire hook it up press the igniter switch bam
Hungryhowiepizza 3 years ago
hey thats was really cool and im kinda new to this stuff but what does ANFO stand for plz respond..... thanks alot
SLA224477 3 years ago
Ammonium Nitrate Fuel Oil =)
just search on wikipedia
DavidHasselhoff52 3 years ago
Animals Need Food Or.......
ValveOilOnFire 3 years ago
AN=AMMONIUM NITRATE / FO=Fueloil
Hungryhowiepizza 3 years ago
I found this stuff in the hardware store called "spirit of salt" i looked it up on wiki and it turns out its HCl. it says WARNING EXTREMELY CORROSIVE!!! and other warnings. I was wondering if its concentrated enough to work for TATP. No harm in trying i guess?
Incredibleman007 3 years ago
I have a good knowledge of explosives and i know how to desensitise primaries the only reason i prefer sulfuric acid to other strong acids is because it can be used to make much more than TATP. you can make Nitric acid from which you can then make: RDX, Nitroglycerine, TNT, and all kinds of nitrates!.Im not dumb, i just like sulfuric acid, its much more than a catalyst! Also, dose anyone know where to get benzene?
Incredibleman007 3 years ago
I cant realy get any strong acids but i will look around for that toilet cleaner. Is battery acid strong enough? its 40% sulfuric acid?
Incredibleman007 3 years ago
I can get hexamine but i have to order it. anything else?
Incredibleman007 3 years ago
Hmm.. I STRONGLY reccomend you to reaserch befor making any HE's!!!! You will end up dead if you keep proceding this way! Unstable primarys is not the explosives you start with when you don't have basic knowledge on the subject!
sMuLecrew 3 years ago 2
500g 10/90 HMTD/AN det. will blow up 3kg of ANFO (94.5/5.5 AN-Diesel) in a plastic baggie ?
andreh182 3 years ago
Yes, but you shuld know that before even thinking of making explosives..
sMuLecrew 3 years ago
I live in a country where they dont sell sulfuric acid on every corner so it is difficult for me to make a sensitive explosive. What can i use to make a good detonator. I have tried TATP but it dosnt work without sulfuric acid. HELP ME !
Incredibleman007 3 years ago
Try HMTD (:
andreh182 3 years ago
That guy should not try anything before reaserching.. :)
sMuLecrew 3 years ago
now i'm doing my research..would benzene work with AN?
jlasud 3 years ago
Well.... I ain't saying this to be bitchy, BUT! If you cant find out how to make AP without H2SO4, then i sugest that you stay away from HE's untill you have MORE knowledge!
sMuLecrew 3 years ago
do they have a brand of toilet bowl cleaner called "the works" or if you can get your hands on muratic acid that would work too you can replace the sulfiric acid with these
meyermaggot 3 years ago
damn gophers!
GoibniuGodOfTheForge 3 years ago
ive read you can use sun flower oil as a fuel oil,but how long would you have to waith after adding it to the AN before its ready to go ?
patrickuk5 3 years ago
Up to you to decide :P
sMuLecrew 3 years ago
What about Mercury fulminate in a .223 cartridge? would this set ANFO off?
olds86307 3 years ago
Only high explosivs can detonate anfo.
DailyGrower 3 years ago
Mercury fulminate is a primary with which you can make a detonator. ANFO is quite difficult to detonate, so you will need a booster charge (explosive which can be easily detonated by a detonator). In theory you could use MF as a booster but that is bloody dangerous, because of the sensitivity of MF to friction and spark in dry form.
drdirtblast 3 years ago
NOOOOOO! not a 223 cartridge contact with metals make primary even more sensitive tha they already are!
meyermaggot 3 years ago
i have researched this stuff briefly and was wondering if a metal pipe bomb about 3/4in. X 4in. filled with black powder would detonate it?
lctchamp 3 years ago
Well.. If you have researched "this stuff" briefly, i would say that you are one shitty researcher.. :P
But since i am so kind, i can give u the answer:
NO..! NO LE's will detonate "this stuff".. If you read trough the comments on this or some of my other videos, you can see the answer mentioned several times..
Have a nice day :)
sMuLecrew 3 years ago
k3wl.
nixrate 3 years ago
nice
asp292 3 years ago 4
hnnnb vmbn-
horvdav2 3 years ago
du hadde rett eklaF, det e ein dam der nå :P
loffesenior 3 years ago
I know. I was just making fun of the quality of some comment boards here, regarding explosives. People always think of explosives as a gunpowder, or flash.
Tamasen1 4 years ago 2
This comment has received too many negative votes show
ANFO= Black powder + fuel
Tamasen1 4 years ago
Wrong, AN means ammonium-nitrate, not black powder.
Madarpok 4 years ago
Ammoium Nitrate with Fuel Oil
joperee 3 years ago
do you seriously think that is what made that 10ft. crater?
werden777 3 years ago
haha sweet det
lardlover447 4 years ago 6
wow i can just imagine what a pressure mine full of this shit would do to a guy :D:D:D:D lol
shibogee 4 years ago
This comment has received too many negative votes show
ARE YOU RETARTED?!?!?!?!
cyberkazoo2 4 years ago
nope.. you?
sMuLecrew 4 years ago
im saying yeah because of the lack of d's in retarted
ioweuonedollar 4 years ago 3
nope not at all retarded! thanks for asking though LMFAO!
cyberkazoo2 4 years ago 3
This comment has received too many negative votes show
ahahha are you?? noobish
AirRifle1980 4 years ago
I'm sure the NSA has you black flagged...
kiashamed 4 years ago
holy crap
trobeed 4 years ago 2
thanks i guess ;P :)
sMuLecrew 4 years ago
do u have to use a detonator or does a fuse work? if u need a detonator, how powerful of one do u need?
067988659 4 years ago
Pleas read other comments on this video.. :) send a mail or PM if you have more questions that you cant find here..
sMuLecrew 4 years ago
so would a 2or3 gs. of flash detonate the anfo?
robertroach20 4 years ago
NO!
sMuLecrew 4 years ago
Flash powder...lol.
trx746 4 years ago
is cloudy ammonium the the same thing? can u sue it?
vagin3r 4 years ago
what do i need to detonate the anfo? can i have a fuse? or what sorry my english suck
falkson10 4 years ago
you need a blasting cap or improvised version... Acetone peroxide
lasdhkfdslhdlshaf 4 years ago
how do u gfet acetone peroxide and how do u set that off?
067988659 4 years ago
wtf is anfo? mo fo
elvelordpka 4 years ago
Ammonium Nitrate Fuel/Oil bomb.
WORLDREIGN 4 years ago
a lot of dangerous fun just for youtube.
OUTSIDER01 4 years ago
but its worth it!
noobwithagun 4 years ago
Hehe i see you guys are Norwegian because of the Rema bag ;) Where in Norway was this?
henning334 4 years ago
briliant but if ther will be a litle stone, from you head you have 2 heads hahaha
brucesroka 4 years ago
do you have to wait a certain amount of time after putting 6% kerosene in it or is it ready right away and can you use a flash powder filled co2bomb in a toilet paper tube would that work for a blasting cap or do u have to use apan and then u use electric ignition so you dont die
jacobmoneymaker 4 years ago
your AN, is a recristalized fertilizer, or bought pure, or coldpack?
NITROMETHANO 4 years ago
How deep under the mud was the charge?
SwissPyro 4 years ago
well.. :P long time since the blast now :P I really cant remember.. but i would say 40-60 cm.. See on the video, when sir wank'alot places the charge it is almost at the bottom..
sMuLecrew 4 years ago
wow how can i make this stuff?
gruftin 4 years ago
Whit tons of experience and knowledge...
sMuLecrew 4 years ago
Not really, ANFO isn't that hard to make, now being able to detonate it and not kill yourself is another story, depending on how much you make of course.
Genocyde0 4 years ago
ofcourse. As i meant it: to make, and detonate it. You have no interest of just making it.. And therefor you will need "tons of experience and knowledge"
sMuLecrew 4 years ago
Well i have been playing with aP for along time, experimenting with it and it's getting old. If let's say i use 300 Gram's of AN the right mixture of FO would be like 3.0 Grams of it ? i know FO is Liquid im just giving a example.. ?
Xtcdealit 4 years ago
haha hvor i helvete gjorde dere dette??
stian1986 4 years ago
I de dypeste skoger i noreg :p
sMuLecrew 4 years ago
Np, im new to the HE stuff but i know some stuff about pipebombs and stuff. I wanna fill a like 20-25 cm long c02 cartridge with annm and detonate it with hmtd.
SwissPyro 4 years ago
Ok, But i recommend that you read and read and read before making any HE. And start with small amounts first. Specially when it is unstable primary's like HMTD.. And you do not need confine it.
sMuLecrew 4 years ago
helle smule
good job!
how much meter were you(or your camera) at time of the explosion?
loignon51 4 years ago
Thanks. We were perhaps 60m +++ And The camera was on a hill minimum 20 meters away form the blast.
sMuLecrew 4 years ago
That's one big crater
SwissPyro 4 years ago
ye, but i could have been bigger if we dug the charge further down.. ( thanks ;) )
sMuLecrew 4 years ago
just curious not going to make it but how do u go about making this, AN is found in fertilizer but how do you break it down?
Gmoney400 4 years ago
try reading some of the comments, i think you will get your awnser there. If not, send a pm, or just post again.. ;)
sMuLecrew 4 years ago
how do you make anfo? I tried AN melted with gas on it and it didnt go BOOM! so if you could please tell me what I am doing wrong. Thanks
1377chunter 4 years ago
Try getting more experience before making HE's.
sMuLecrew 4 years ago
anfo is simply amonium nitrate and fuel oil. you can use diesel for the fuel oil or keresone or even nitromethene. Anfo itself is highly explosive but difficult to detonate (as ive heard) i have not tried it and im not sure how to det it.
funkyspandex 4 years ago
Yep, That is true. To detonate it you will need a quite powerful booster.. So yes, It is pretty hard to detonate..
sMuLecrew 4 years ago
That is quite awesome. Great job.
hinckleyforpresident 4 years ago
Thanks. I like your video too. Xylene AN is pretty cool. Have tested it, but not more than 200g.
sMuLecrew 4 years ago
hey man i love your work but im not to that scale + i dont have the meterals (if i know what they where) :b
pol1on1 4 years ago
Thanks, :P Not difficult to get.
sMuLecrew 4 years ago
can i use a straw full of lead styphnate to detonate a toilet paper roll full of ANFO
apoelistas9 4 years ago
bakepulver og eddik?
brainiiac 4 years ago
Yepp :D
sMuLecrew 4 years ago
nice.
speeddemon420 4 years ago
Thanke :P
sMuLecrew 4 years ago
ok really that would not only blow your hand off and if you got caught in tht big of a bang u would proboly mixed with those little pieces of mud lol
cancheeb 4 years ago
OH DAYUM
GIGITY GIGITY GOOO!!!!
GJ
PLAYWITHFIRE69 4 years ago
Dude that's a huge ass crater! Good job, very well done!
penguinsquishy 4 years ago
Great job man!
Great job!
I wouldn´t do it betther on my own,detonating 90%+ NAFO in souches wet area!
mfilip62 4 years ago
Real great detonation. I think 90-100%. Really amazing.
drdirtblast 4 years ago
No it isnt safer then tatp there both very unstable and unreliable shaw it gose booom ,but you will be crying like a bitch if your hand gets blown off find a better safer alterentive to organic peroxcides.
hightimees 4 years ago
hightimees: You are rigth. All your allegations are mostly rigt. HMTD is relative safer than AP to handle, but none of them are safe. And yes, i would probably cry like a bitch if my hand gets blown of! And yes, another alternative would be appreciated. But the thing is that TATP and HMTD is cheep, easy and fast to make. And they do their job.. So. Until i get more and different chems, i will make organic peroxides.
sMuLecrew 4 years ago
yeah i understand, I just dont wanna see anyone get hurt=(. I must say that blast was very impressive =)anyways be carefull!
hightimees 4 years ago
Part 1:
Same here. I don't want anyone to get hurt. Safety is the first thing we think. The Explosive is never stored, the detonator is made rigth before blasting, the detonator booster and main charge is transported in separate bags, with distans between. Battery, cam and stuff like that is also in another bag than explosive, booster or detonator. The wire is connected to the detonator first, (away from booster and main charge) then the detonator is put in boster, and booster in main charge.
sMuLecrew 4 years ago
Part 2:
And then the wire is connected to the firing box, the area is checked an secured. Then we warn with 3 loud shouts. "fire in the hole/fyr er det her/varsku her etc.." And then the blaster take an overlook at the blasting site, an after that he counts down, (loud) 3, 2, 1.... Boom :P This is our normal procedure before any blast.. (well, not the smallest ones, but you get the idea.. ;) ) Thanks, i must say the same :P I did not expect the blast to be that big. Well well, Take care :D
sMuLecrew 4 years ago
in who shop I can find APAN??
3nilkostas 4 years ago
3nikostas: Don't know.. Tell me if you ever find it.. :P
Seriously, do you think that you can just go to some shop and buy APAN? APAN is Acetone peroxide and Ammonium nitrate, AP can be made, and AN can be bougth.
sMuLecrew 4 years ago
did you use hmtp to detonate it? if yes how much?
ozonee100 4 years ago
No, i did not use HMTD to detonate it.. I used a 600g APAN 10/90 charge as booster, and a 1-2g APAN 70/30 as blasting-cap.. or something like that.. i dont really remember the ratios on the cap..
sMuLecrew 4 years ago
what does APAN mean????
cdstyle1993 4 years ago
APAN means Acetone Peroxide/Ammonium nitrate. It is an high explosive, that is often used, and rather cheep and easy to make.
sMuLecrew 4 years ago
Vedder på att mammaen deres liker det dere holder på med,hehe.Dere er KONGE!!!!!!☺
Azkiboy 4 years ago
Mor og far eg ikke så veldig begeistret over proskjektene mine, men de sier at så lenge jeg jobber sikkertog ikke gjør hærværk (som jeg personlig hater at folk driver med!!!!). Og det Akter jeg å fobeholde..
Takk skal du ha :D
sMuLecrew 4 years ago
ANFO is ammonium nitrate and gasoline right?
icewaltz222 4 years ago
Yep :P
d3dfoobar: What do yo mean?
sMuLecrew 4 years ago
OK I can do that :P Do I need anything special to detonate it after i've dissolved the ammonium nitrate into the gas or is it ok just as is in a gas can or something?
icewaltz222 4 years ago
Yes. You will need someting powerfull to detonate it..! like APAN. if You read all the comments on this and the 1kg ANFO underwater video, you will find what you will need of info. (The FO is just blended in the AN)
sMuLecrew 4 years ago
Sorry, I meant that, if this was fertilizer based, did you purify it with alchohol, or in water or something?
d3dfoobar 4 years ago
No, i have cleen fertilizer AN, so i dont need to purify it..
sMuLecrew 4 years ago
Ohhhh I wish :(
I'm stuck with instant cold packs : /
pRiMEsALiVa 4 years ago
Well, they are better than nothing ;)
sMuLecrew 4 years ago
Yeah, true, true. It's just unfortunate I haven't got a Tractor Supply in my area.
pRiMEsALiVa 4 years ago
nice vid...what use to detonate the anfo??? it waas a detonation charge???
T0t3nk0ph 4 years ago
As said many times on comments and even in the beginning of the clip, i used a 600g 10/90 APAN booster charge to detonate the ANFO. And to detonate the 600g APAN booster i used 1-2g 70/30 APAN blasting cap.
sMuLecrew 4 years ago
read at 00:06 in the clip.
sMuLecrew 4 years ago
i have a bag with ammonium nitrate but it is 33,5% purity. can i use it??
greenleaf33 4 years ago
i could use the ammonium nitrate of instant ice packs to make ANFO? sorry for my bad english
greenleaf33 4 years ago
That depends on if it is "coated" or not. If it is you will need to clean it. And if not you can use it.
sMuLecrew 4 years ago
How do you clean anfo? In wood alcohol or something?
d3dfoobar 4 years ago
alright, i know Australia is ultra strict on these sort of things so i was wondering if there was some or of product or place. even nurseys no matter how big or small don't sell it.
ggggggggggggggggfhfh 4 years ago
oh sry i mean where did you buy it?
i`m from suisse..;-)
blingniger3 4 years ago
try your local nursery. Most fertilizers have AN in them. It has to be at least 88%
AirsoftLife 4 years ago
where do you have the ammonium nitrate??
blingniger3 4 years ago
I think a good question is how do you prepare so much anfo in terms of drying it and mixing with FO. Do you do it 1 kg at a time?
anfoguy 4 years ago
ammonium nitrate?! thats fukin industrial fertilizer. go to home depot or lowes or seomthing
madpanda8 4 years ago
No. Home depot and Lowes don't sell it. They know what it's used for... I haven'