PMR Review

[timmy5997]

how much will it cost if i break the battery pack wire

[paintball1628]

is it accurate

[kookamajunga]

yep, but accuracy doesn't depend on the gun. Any gun can be accurate

[mattpaintball3]

what asa do you have on ur pmr?

[echinturbo]

drop forwards are UGLY!

[halawa51]

wts the big deal on the ul frame

[kookamajunga]

Mostly feel and the trigger you get with the UL

[Beastn222999]

should i get that rigger

[kookamajunga]

I wouldn't recommend it. To get it to walk good, you need the trigger sensitivity and pull to be EXTREMELY light. Most people don't like it. I'm fine with it but I suggest a critical trigger.

[viniboy25]

would have been nice to see you shooting the gun

[kookamajunga]

Check out my videos. There's one where I do shoot it

[evilchubchub]

o ooops i probly didn't pull it hard enough thanks for helping me most people would just flame about what a idiot i am

[evilchubchub]

o thank u and um i got back from paintball yesterday and left my gun alone for some reason but when i took to clean it today i turned on the gun the tapped the trigger air bursted out of the back cap so i turned the gun off gun and started tacking the back cap off and it wouldn't come out all the way!?!? so i kept unscrewing it for like 10 minutes and it still wouldn't come out so whats the problem???? :(

[kookamajunga]

From the way PMR's are built, they puff out air from the back. It's just their bolt design.

Anyways, the back cap should screw out to a certain point then you have to pull it out.

[evilchubchub]

but if u didn't do that would the back cap like shoot out of the gun when u unscrew it because of the presure in the reg????

[kookamajunga]

No, air would just shoot out of your ASA. Its just a short burst if you twist quickly.

Doing it that way is hard on orings and it wastes more air than the other way.

[evilchubchub]

how do u de-gas it its very stupid i know but please answer

[kookamajunga]

When you have it gassed up, turn off the eyes so the gun can shoot freely. Now, turn your tank and shoot continuously at the same time. the shots will sound normal then they will get weaker as the tank comes off. Once they stop, you can just unscrew the tank.

Of course, you could just unscrew it, but that is hard on the orings and your ASA

[rocketmancah]

nice vid

[AzKillaKrewPB]

thank you very helpful.

[RuNiTzSpAnKy]

does the back cap get loose?

[kookamajunga]

Mine never did. I did strip it however and I didn't even attempt to fire it with a stripped back cap.

I think I did see a video where the back cap unscrewed itself, but thats the only case I've seen.

wither way, if you have a pmr, replace the back cap. You will eventually anyways.

[charger457]

yeh it does mine did all the time so i bought pm7 n quest lol

[smartpartsSUCKS]

IONS SUCK! Get a PMR like this guy!

[Dye4evr]

wats a bore on the barrel

[kookamajunga]

The diameter. IE: paintballs have a diameter of .69 and thats their bore size

[cannibalchild99]

good review, thanks for the info

[alexv001]

lol ya the ul is heavier but when u hold a gun with a ul u'll want one

[kookamajunga]

...I have and like I said, I don't NEED one. Sure, I want one but why spend good money on it when I don't need it?

[BoY860]

i have had my pmr sense it first came out and ill tell ne one who wants a gun go and buy it its still amazes me till this day i have shot low end spiders and high end eclipse and this thing handles like a pro gun

pmr virtued up with ul fram =)

[EWM27]

nice man, im gonna be makin one of these reviews myself on the PMR

[PrimeraG20]

theres a few reasons to get a UL frame. the biggest one is the intergrated battery harness. no more broken wires or snapped battery case. another feature is if you want to upgrade the board, you can also upgrade the eyes to wired eyes. and it also adds resale to your PMR.

[PB4LLeR]

PMR is better personnalyl i thihnk mor common parts and watnot

[zippy2k7]

great video im thinking about getting a pmr but i dont know wots better a slg or pmr

[kookamajunga]

PMR is better. An SLG is a low level elec marker. A PMR is a mid range.

The only theing a SLG has over a PMG is air efficiency

[zippy2k7]

alryt thx man could you do another video if ya got time doin a gear bag vid

[kookamajunga]

Already planned =)

Right now I'm waiting for some stuff in the mail, but I'll have one up very soon. I'm waiting for a back cap, and I may get a blue mirror lens for my mask soon.

[gr33nperson]

the pmr is more prone to leaks and problems than the SLG.