the trick is to open the whole thing, and adjust the two screws that are attached at each faders motor. but be CAREFUL!!.. just try tightening them a bit. also one drop of oil at the faders shaft should help.
I just got my BCF2000 today, and had the same issue. It's not about which DAW you're using, what laptop specifications, etc. It's the hardware issue, all you need to do is to strip it down and belts. I've sent you a video response to create awareness of this issue..
I have the same problem with mine. They might be even worse than yours. I am going to exchange mine for another one to see if there's any improvement. If the 2nd one is still bad, I will try opening it up and tightening the belts. The PDF with instructions is really well done, but it still looks pretty tough to do.
Some have corrected this problem by tightening the belts inside the unit, but this requires some surgery.
I haven't tried this on my unit, which does exhibit the jittery behavior, and wlll probably just return it instead. Be aware of any risks of damage or voiding the warranty if you try the procedure!
No I'm afraid! I've been told that some are smooth and some are not! It comes down to price at the end of the day. The company I bought it from have offered to exchange it but I've tried a friend's mixer and it worked just the same!
mine work just fine mine are smooth but i do have to say that when i bought it at first they did not they were crap faders i assumed it was deffect so i returned it they gave me a new one and the new one worked perfectly fine
the trick is to open the whole thing, and adjust the two screws that are attached at each faders motor. but be CAREFUL!!.. just try tightening them a bit. also one drop of oil at the faders shaft should help.
sonicfire1980 3 months ago
@sonicfire1980 you shouldn't! if you open the whole thing, you lose the warranty of it, you better ask for new one
LifeStylezNL 2 months ago
I also got the bcf2000 and with the right asio settings, the faders will run smooth like other digital mixers.
djgenerator 3 months ago
I have two of those and one works nice and smooth and the other is cranky. ok.. the BCF2000 is just an inexpencive controller. but it does the Job.
losttearsmusic 4 months ago
lol :D that's cheap
LillaKrisu 4 months ago
I just got my BCF2000 today, and had the same issue. It's not about which DAW you're using, what laptop specifications, etc. It's the hardware issue, all you need to do is to strip it down and belts. I've sent you a video response to create awareness of this issue..
bahbuh 5 months ago
Yenz guys got to put the bcf 2000 in mackie mode and the latest drivers for it to work. then it will run smooth!!!
brandondkp 8 months ago
That's worrying, Mine is due to arrive tomorrow via post. I don't want to have to send the thing back.
MrMpalmer33 8 months ago
I have the same problem with mine. They might be even worse than yours. I am going to exchange mine for another one to see if there's any improvement. If the 2nd one is still bad, I will try opening it up and tightening the belts. The PDF with instructions is really well done, but it still looks pretty tough to do.
darinfong 8 months ago
Does this only happen with Logic, or with other programs as well?
onthe1drop 11 months ago
Here's a link to the procedure (I have not tried this myself; try at your own risk):
okrobotics com/BCF2000.pdf
onthe1drop 11 months ago
Some have corrected this problem by tightening the belts inside the unit, but this requires some surgery.
I haven't tried this on my unit, which does exhibit the jittery behavior, and wlll probably just return it instead. Be aware of any risks of damage or voiding the warranty if you try the procedure!
onthe1drop 11 months ago
Hi!
I just got mine and i've got the same problem!
Did you find the solution?
Thanks
thepouncer01 1 year ago
Hi,
No I'm afraid! I've been told that some are smooth and some are not! It comes down to price at the end of the day. The company I bought it from have offered to exchange it but I've tried a friend's mixer and it worked just the same!
jjtw01 1 year ago
mine work just fine mine are smooth but i do have to say that when i bought it at first they did not they were crap faders i assumed it was deffect so i returned it they gave me a new one and the new one worked perfectly fine
1ROSETV 1 year ago
@1ROSETV
Hi, thanks for your reply. What software are you using with your BCF2000? I'm using Final Cut Pro.
Thanks
JJTW01
jjtw01 1 year ago
@jjtw01 im running it with protools ! but i my self was using it in final cut and worked just fine my dude
1ROSETV 1 year ago
no sorry they dont move smooth at all and why do they move it that?
beatzsmartzshow 1 year ago