Not really :-). I am using an ATTiny 26 (Atmel) processor to process the incoming signal from my receiver and control all different lights (all run and in depend pattern). Furthermore the ATTiny generated the signals for the three servos, they also are controlled independently. If you like I can publish the code.
I meant that in general flying with a 35MHz transmitter is not really different from flying with a 2.4GHz transmitter. I decided to buy a 2.4GHz transmitter after I had some crashed due to radio interference on 35MHz. 2.4GHz has absolutely no interference with other transmitters.
2.4GHz transmitter does have interference too, you dont see it cuz 2.4GHZ can operate on different channels and if you unlucky then flying your heli near somewhere that use the same channel and its live!!
The TREX600 weights about 3.3 kg without battery and including the bell222 fuselage about 3.9 kg without battery.
This fuselage is quite well suitable for the TREX600.I bought the torque tube, this makes building much and much easier.
I have designed the electronics for controlling the retracts and (landing) lights myself. Everything is now controllable with only one switch on my transmitter (==one channel on my receiver). If you like I can put the schematic and software on my website.
Comment removed
aponorth 1 year ago
hay wana sell it ....
paddywagons104 1 year ago
Great video!! Is that the 50 size Funkey fuselage from Century?
Luvhelis 1 year ago
Great Heli!
Powershotknecht 1 year ago
Please.. say me .. what is TRO/PITCH curves do you use??
jrsomseabra 1 year ago
I guess you are using a counter with binary output, and you do the increase remotely :-) is it right? :-)
Moumou727 2 years ago
Not really :-). I am using an ATTiny 26 (Atmel) processor to process the incoming signal from my receiver and control all different lights (all run and in depend pattern). Furthermore the ATTiny generated the signals for the three servos, they also are controlled independently. If you like I can publish the code.
FrankKoelma 2 years ago
Love the Helicopter, I've got one too :)
griffo0007 2 years ago
Hi!
Very good looking heli! What is the brand of the fuse? Price?
tks.
kentanilsen 2 years ago
A side form the model heli... thats a great song... who is it from? Mike Oldfield?
shanoysa 2 years ago
Very nice model heli =)
JaSeY963 2 years ago
35MHz transmitter??
Ravier03 3 years ago
Yes, I was using a 35MHz transmitter but now using a 2.4GHz transmitter (FX30).
It does not matter...
regards,
Frank
FrankKoelma 3 years ago
2.4GHZ has much better rang than 35MHZ how do you say it doesnt matter?!!!!!
aminuk23 2 years ago
I meant that in general flying with a 35MHz transmitter is not really different from flying with a 2.4GHz transmitter. I decided to buy a 2.4GHz transmitter after I had some crashed due to radio interference on 35MHz. 2.4GHz has absolutely no interference with other transmitters.
FrankKoelma 2 years ago
2.4GHz transmitter does have interference too, you dont see it cuz 2.4GHZ can operate on different channels and if you unlucky then flying your heli near somewhere that use the same channel and its live!!
aminuk23 2 years ago
Is the heli sitting on the box of an OS Engine in the beginning?
RcGuitarHeli 3 years ago
Very nice :) was the fuselage difficult to fit ? and how much overall weight was added ?. Thanks for the Vid :)
Mindrover1 4 years ago
The TREX600 weights about 3.3 kg without battery and including the bell222 fuselage about 3.9 kg without battery.
This fuselage is quite well suitable for the TREX600.I bought the torque tube, this makes building much and much easier.
I have designed the electronics for controlling the retracts and (landing) lights myself. Everything is now controllable with only one switch on my transmitter (==one channel on my receiver). If you like I can put the schematic and software on my website.
FrankKoelma 4 years ago
That would be great, thanks, and great job on the heli. She looks VERY Sweet. :) thanks for the response :)
Mindrover1 4 years ago
Are you able to program the Atmel Tiny 26 solder the components?
FrankKoelma 4 years ago
Shouldn't be a problem :)
Mindrover1 4 years ago