Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (148)

Sign In or Sign Up now to post a comment!
  • i did it all over again and when the snowflake with bar dissapears an apple with a bar comes up and loads and then just a snowflake apears and i did the ibooty process sevral times and nothing it just stays in dfu mode ? and when i turn it on it has the snowflake so no longer stuck on the apple but now the snowflake :/

  • @Dextrzrevolution hold the home and power button for like 9 seconds then let go off both to hard reboot the phone.

  • and also i clicked on idetect to see what boot rom i had and said uknown?

  • what if its this firmware i have ((( iPhone2,1_5.0.1_9A405_Restore ))) and make a custom one out of it on snow breeze any problem ?

  • ok i will get back to you when i try this again thanx

  • my iphone is an unlocked 3gs untetherd and jail broken with an ipad base band running on ios 5.0.1 will this procces still work?

  • it wont connect to itunes

  • @p00h976 try turning off the phone, then hold the home button and continue to hold the home button while plugging it in the computer.

  • mines got stuck on the apple logo after doing the ibooty process can you help me ?

  • @Dextrzrevolution Do the iBooty again or use the newest version of snow breeze found at ih8sn0w,com

  • hey i tired to change my bb from 5.0.1 to 06.15.00 and its stuck at the connect to itunes screen and wont reset what do i do

  • @p00h976 Follow this video to restore to the custom firmware, just do everything the video tells you to do.

  • It says " Sn0wbreeze has failed" how did i fix that?

  • Hey i tryed getting the jailbreak from redsnow lattest vesion 5.1., and it wiped down my device and i tryed holding the Sleep and home botton then it work and made me restore so i did. then tryed it again on more time and it said it work and it went through all the steps like it downloaded version,and when it got to the Pineapple logo it froze then i did the home and power then turned it on again, and it went to just apple logo and it wont change im afraid that i have messed up my phone.plz help

  • @120000000ish When the pineapple shows up it takes a while so you might of thought it froze. Just redo the process and let it finish.

  • i m in a problem i did what as u have breifed me in this video and now when i put a sim card it says " no Service" what is the solution for that? please help me asap

  • @devdharshan did you forget to install ultrasn0w?

  • HI...thnx mite,it works perfectly gud 2 me!! thnx a ton 2 u as i thught i'd nvr use my Ifone agan!!!

  • Hi.. I have iphone3gs version: 5.0.1(9A405) firmware: 06.25.00 manufacturing: 945.

    I jailbreaked it using redsnow 0.9.10b2 and the firmware i used is iphone2,1_5.0.1_9A405_Restore

    The device is working now but career is not working even after installing ultrasn0w using cydia.. Is there any other option to make it work?

  • I only ever get different error messages on itunes.... this may have worked for you but not for me and the others here. error message -1, 1600 etc. ebay for spares for me. thanks but you should change title to 'maybe' unbrick your iphone. was worth a try.

  • @stevemu7 You are getting 1600 error because you are not following the directions. Make sure you put your device into pwned dfu mode, around 2:35 in the video.

  • I only get different error messages on iTunes.... this may have worked for you but not for me. error message -1. i do not know what to do next. my device is in the iTunes mode and will not change... please help, what do i do next pls

  • I get error 3194 and 1600? What do I do

  • I did it but I have problem of no service after all the stuff. How can I fix no service issue?

    Thanks.

  • @deepakverma1000 What is your baseband/serial #?

    Did you install ultrasn0w?

  • Hi Did Exactly what was in the Video everything went on fine. with no errors. But still i dont get a T-Mobile Signal.... I still see NO SIM

  • HELP! i JB'd my 3Gs and i installed spire. it bricked, and only showed the apple logo. it wont start even if u keep holding both buttons. and i finally got it to show the iTunes logo, but if i try to restore, it says error 21, and it goes back to Apple icon -.- so would this help? cus i really cant go into DFU mode, since it's unresponsive... ;((

  • @maxz3r did you ever get it to work?

  • @120000000ish yep, it's fully functional and jailbroken ;3 but sometimes the keyboard for the app/music/notes/mail in the springboard disappears...

  • Iphone informant ipad 3 giveaway..

  • Hey IphoneInformant ,

    I had a new iphone 3gs that came with 5.0, i then updated to 5.0.1. I tried to jailbreak b i updated ipad baseband that bricked it. Right now my iphone is stuck with itunes logo. Would this video help fix it ??

  • @malazchahine yes it would.

  • does it work for mac?

  • Is There Any Way To Downgrade From The 06.15.00 Baseband? Because I Really Need To.

  • @xF34RMeRRkZz Nope, there's no way.

  • Hi!please can u show we how to update iOS 5.0to 5.0.1?thank

  • @myomyinthtwe If you are on 5.0 with the 06.15.00 baseband and want to get on 5.0.1.... then follow this video and use the 5.0.1 firmware with snowbreeze, then shift restore in itunes to that custom 5.0.1 firmware

  • 1600 Error :( Help Guys! need my phone back! ;(

  • @Cpdells 1600 means you must of skiped the step of putting the iphone into a pwned dfu mode. you can open up snowbreeze and the click on ireb to put your device into that pwned dfu state. then do the shift restore to the custom firmware.

  • @IphoneInformant Then i stuck on unknow error 11 -_-'' :'(

  • @Cpdells Maybe its because of i live in Sweden :/?

  • hi i did as u show us but booty not works no bootup

  • u saved my life, thanks :D

  • thank u so much!!!

  • successfully unbricked on 06.15.00, great video .. installed ultrasn0w, however i have a signal problem, i am not picking up no reception, how do i ressolve this?

  • i can use this video if my iphone has a 05.16.05 baseband??

  • why when i Restart the iPhone it will stack at the the apple logo??

  • @charleslai8608 Thederd Jailbreak

  • can you make a guide on how to download back all my cydia option??

  • Is this semitethered, untethered og tethered?

  • @7cey7 Thederd

  • I'm havin the reboot loop and no Bluetooth, service, and wi-fi. Any help?

  • Just tried using ibooty again and I'm back on the itunes bricked screen.. Any suggestions as I'm slowely losing it!!!

  • Thanks for that eskimochillin... and excuse my lack of tech knowledge, but when the untethered jailbreak is released for the 5.0.1 D4 (which should be any day now) can I then install this to my tethered iphone?

  • Help!.. My iphone 3gs was bricked until I followed your instruction for Sn0wbreeze and ibooty. My phone was originally locked to Orange and I had 'No Service'. I then installed Ultrasn0w and am stuck on the Apple logo and am unsure of what to do next... Can you help me please?

  • @en1ightenme Use iBooty to boot up your device tethered at about 4:15 of the video

  • I have an iphone 3gs 5.0.1 05.16.05 baseband , If i do this and install the ipad baseband in snowbreeze can i unlock it ?.

    Please reply need the unlock

  • i did everything and restored the phone and turned the phone with ibooty and now i am back where i started, the phone get back on dfu mode again. help!!!

  • It all worked up until i was restoring it on itunes. i did everything correctly. But a little bit after i shift clicked restore and clicked on the sn0wbreeze iOS things it said ' The iPhone could not be restored, unknown error (3194) ' Help?

  • @TehMagicTouch You will need to download a program called "tinyumbrella" its a nice little tool. Open Tinyumbrella and click the button "start tss server" now that the server is running you will not get error 3194. hoped that helped. i am going to make some error videos today.

  • Probably THE ONLY Best video with authentic help and really nice way of explaining things.

    Thumb Up so everyone can see and dont just jump to another video without watching this.

    Cheers

  • i keep getting error 1601 on itunes

  • hey will this video work for me if i am on the ios 5 setup screen and my iphone 3gs says searching/no sim

  • it boots up but after about 50 secs it cuts back off....whats going on

  • Comment removed

  • This has to be wrong.. I've updated my 3GS to 5.0.1 jailbroke and unlocked with iPad 6.15 baseband and ultrasn0w didn't work.. all I ever got was searching then no service! I had to downgrade to 4.1 to get my unlock back.. I would love to have 5.0.1 on tmobile because I LOVE all the new ios5 features! anyone know a fix or what's the deal?

  • @brandonseralena ultrasnow has not been updated for 5.0.1.... you need to install the ultrasnow fixer. click the yellow annotation on the video.

  • How did you manage to get ultrasnow working on 5.0.1??

  • im getting error number 9 what should i do?

  • I keep getting error 3194, please can you help me

  • have retired the whole process and booted with ibooty a few times but still only stays on for 30 seconds then back to apple screen. would really appreciate any help, thanks

  • all went fine and booted with i booty, the phone started up to my main screen then about 30 seconds later went off and back to the apple logo, please help

  • can you please help me i had the 4.1 ipsw and i tried several times to restore 5.0 on 5.16.00,and 4.3.3,4.3.5,4.1 but not a luck...every time,or error 3194 or gets stucked on recovery mode...my phone is on O2 and i don't have a sim because i want to use it on Orange

  • It's not working .

  • when i am using ibooty and it just fucked some shit up on my phone.

  • Comment removed

  • Comment removed

  • im keep getting error 21...help please

  • @dyrenr are you forgetting to put your iPhone in a pwned dfu state before shift restoring?

  • @IphoneInformant Yes same here, don't work :(

  • i can't open Sn0wbreeze. i have a mac. it is in a exe format. and it says i ave to supply the filename encoding to open.

  • i restore it on itunes with snowbreeze firmware but when my iphone is restoring instead of a apple logo it is stuck on a snowflak with a loading bar at the bottom what should i do ?

  • @HOUSEPARTYBOY101 boot it up with iBooty, i think around 4:15 in the video

  • @IphoneInformant i did that now its stuck on a black screen

  • Comment removed

  • @HOUSEPARTYBOY101 try ibooty again, if that fails retry the whole process

  • when i try to boot up my 3gs 06.15.00 5.0.1 with ibooty it will boot up but it has no wifi and doesnt have a baseband and then restarts what do i do......

  • hey i have cydia and i installed ultra snow but i still can't seem to get signal with my tmobile sim card when i insert it into my iPhone 3gs. did i do something wrong?

  • @MrJonagonzalez Click on the yellow annotation in the video.

  • I'm having a problem. Everything seems to work, but when my iPhone boots up, I get no service and then after awhile the device will just turn off and go back to the apple logo. Any help would be greatly appreciated! Thanks.

  • @footman50 are you 5.0.1? check my other videos, i made a video on how to fix the 5.0.1 ultrasn0w

  • @IphoneInformant Yes I am using 5.01. What is the video called?

  • @footman50 /watch?v=zT-BARJyVxA

  • @IphoneInformant I cannot do that though because I can't get internet connection and Cydia won't open.

  • @footman50 if cydia is not opening, reboot up your iphone using that program ibooty. Your then going to have to go to a mcdonalds or some were with wifi to install the source to fix your ultrasn0w... that video i just showed you.

  • I followed all your steps. When I did shift restore I got the error 2005. I tried to use other usb ports, didn't work unfortunately. So I read somewhere you need iTunes 10.4.1. I got rid of the 2005 error, but I got the 10 error, which apparently means that you need to upgrade your iTunes. I'm using tinyumbrella all the time to get rid of an other error. I can't use my phone right now, please help.

  • @YB37 For this to work you need to be on the new itunes since we are using ios 5 firmwares. The 2000's errors really suck and piss me off too. The only advice i could give you is to keep trying different usb ports, uninstall all apple/itunes stuff on your computer then reinstall itunes. Also, put the files on a flash drive and go to a friends house and try it. Good luck.

  • Hey... Is this an untethered jailbreak for iphone 4 version 5.0?? Been waiting on that

  • Nice video, will this work on the newer 3gs? I accidentally installed iPad baseband but I still have wifi functionality.

  • hey tom i did everything you said to do in the video and now my iphone 3gs keeps going to the apple logo and then the loading bar comes up after and then it just shuts off and keeps repeating that can you help me?

  • @R0okie758 go to about 4:15 and boot up your phone using ibooty

  • @IphoneInformant ok ive done that now and now my iphone turns on and off uncontrolably what do i do now?

  • @IphoneInformant ok ive done that and now my phone is turning on and off uncontrolably

  • GOOD SHIT BROW!!

    YOU REALLY HELPED MY ASS OUT!!

  • hi i unlock after startup an the phone an it got stuck on the apple boot mode an thats it can you please help?

  • there is now a fix for 5.0.1 ultrasnow signal, check out my other video

  • Can't get any service after unlock help

  • @mrexculsive2783 Check his latest video, he just made a fix for the 5.0.1 service issue

  • thanks it works.

  • hi i need you help. I'd did every thing as the video shows an got to the end "ibooty'' an it whet back to the iphone ios5 screen. i don't know what i'm doing wrong can you please help me?

  • @themannamelowvy you will be able to click through the ios5 screen and bypass the activation, just try it.

  • Hey my iphone 3gs is jailbroken and unlocked with sn0wbreeze but it says NO SERVICE when i tried to use my tmobile sim and my apps and settings are crashing.....can someone HELP ME PLEASE!!!

  • Hey is there a way to unbrick Iphone 4 because im on ios 5.0 and i tried to update to 5.0.1 to fix it but it failed and gave me error 3194. I really need to know how to unbrick it because everytime i try to boot tethered with redsnow it just stops at the pinapple, or when i try fix recovery it stops in the middle of proccess. I have even tried restoring it from a restore ipsw and i havent gotten farther then error 3194. Can you please help me? Does this video work for iphone 4? Please reply asap

  • ok it booted but it took me back to the ios 5 start up!!!

  • ibooty says its waiting for device and on my iphone it shows the apple logo with the bar under it and nothing is happening please help..

  • Your descriptions are GOOD!!! I just got the problem that my keyboard doesn't work... it does write nothing if i push a key :O

  • thanks bro so much for your tut great job man you saved my friends 3GS

  • i have 3 iphones 3gs bb 6.15.00 with custom firmware snowbreeze 5.0.1 and NO SERVICE i think is bricked i try to downgrade and nothing no service any suggestions thanks.

  • I'm going to be doing the jailbreak on my ipod touch 4g. The instructions apply the same right? And is this untethered?

  • hello! i just updated my iphone 3gs and it wont let me to activate it every time i try it just tells its unavailable what should i do here??? plz help me thanks(:

  • I am able to get in and install ultrasnow but got no service and no carrier how can i fix that???... help please

  • Hi, everything worked fine according to you video till the end i just cant get the phone back on again after using ibooty its on searching (the clockwise circle) and is stuck there? please help its totally dead now. HELP PLEASE!!!

  • if i follow this steps, will there be any "searching" or "no service" problems?

    

  • btw i do have iphone3gs on old bootrom and have 6.15.00

  • Hello IphoneInformant, i followed you direction to the tee, but i still get no service env after i put ultrasnow. When ultrasnow was installing i did get a message "Could not activate cellular data network" please help

  • for network and no service

  • ok im having a probelm im keep getting searching

  • ok great it worked on my laptop man i really love you right now man

  • ahaaa noticed all people that have problems have amd cpus thats y

  • i also got 3194 and with tiny umbrealla 2005 gonna try on my laptop i hate apple make things so hard for people i taught they didnt care about softare unlike bill gates

  • Hi i need help! I was jailbreaking and unlocking my iphone 3gs running on 4.3.3 and i used to see the connect to itunes screen now the screen doesnt display anything but when I do the force restart i hear my computer recognizing it but then it wont download the snowbreeze file :(

  • @brauliosarmiento If it iOS 4.3.3, it's easy to unlock, Warning: Don't upgrade to 5.0.1.

    you have to use iReboot, to boot the phone.

  • great job thanx ...

  • Every time I try it gives me error 3194, help please

  • @JEFFMELO Are you trying to restore to 5.0.1 or 5.0? If you are trying to restore to 5.0 apple just stopped signing 5.0 so that might be the reason you are getting that error. Try using a program called "tinyumbrella" and click the start tss server then do the custom restore, it might not work but its worth a try. Also, some people have claimed to fix 3194 error by switching computers so try that too.

  • @IphoneInformant Thanks for your quick reply, it's 5.0.1, I try to use Tinyumbrella then it's give me error 2005, I'm going to switch computer I'll let you know if it works.

    otherwise I'm gonna have to wait

  • @JEFFMELO If you get error 2005 that means you should just plug in the usb cord into a different port in your computer. What i mean is if your iphone is connected through the usb cable to the left side of your laptop, plug it in to a different usb port on the right side. Try that.

  • @IphoneInformant Switching computer did fix it, but my phone is an iPhone 4, after I reboot using iReeboot, the same iOS 5 screen reappear.

  • @JEFFMELO Update iTunes to 10.5.1 fix your problem

  • Thanks helped alot unbricked my phone after a month stuck

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more