I am very happy to see the vidoe from you, hopefully the others also are happy for You Laser-Schneid-Plotter schneidet Mossgummi bis zu 4mm und Holz bis zu 0,5mm ohne Probleme.
Good, I like that you share this video, I wish success always Laser-Schneid-Plotter schneidet Mossgummi bis zu 4mm und Holz bis zu 0,5mm ohne Probleme.
Sorry for my non-existent German. Is this craft foam you are cutting? What thickness? I'm cutting 2mm foam (and 3mm if black) with a 200mW 650nm (visible red) laser LED ) at approx 50mm/min (I'd say 5-10 times slower than yours) and wanted to cut 6mm foam for a project but no matter how I slow it down, it never actually cuts 6mm - the material begins to melt instead of evaporating and never burns all the way through. I guess, it's time to upgrade to 1W :)
Wieso muss er das Werkzeug holen und wegschaffen?
Sind das wirklich 908nm? das sieht eher nach UV-Laser aus 405nm, oder so was in der Art...
Die Aufhängung mit dem Laser vibriert doch ziemlich stark wenn er schneidet, oder? Meines Wissens sind Laserdioden ziemlich anfällig gegen Vibrationen und Stöße. Ein FASER wäre demnach vielleicht geeigneter.
Funktioniert ja fast genauso wie ein Fräser (:
mondsocke 3 days ago
COOL!!
kopjesenseo 5 days ago
I am very happy to see the vidoe from you, hopefully the others also are happy for You Laser-Schneid-Plotter schneidet Mossgummi bis zu 4mm und Holz bis zu 0,5mm ohne Probleme.
jutsmyface 3 weeks ago
I Love The Video It Can Increase My Knowledge Laser-Schneid-Plotter schneidet Mossgummi bis zu 4mm und Holz bis zu 0,5mm ohne Probleme.
indiage 3 weeks ago
Laser-Schneid-Plotter schneidet Mossgummi bis zu 4mm und Holz bis zu 0,5mm ohne Probleme.
fitnesus 3 weeks ago
Good, I like that you share this video, I wish success always Laser-Schneid-Plotter schneidet Mossgummi bis zu 4mm und Holz bis zu 0,5mm ohne Probleme.
lupabuatchannel 3 weeks ago
Nice Video That You Share , So Very Nice Thanks You Laser-Schneid-Plotter schneidet Mossgummi bis zu 4mm und Holz bis zu 0,5mm ohne Probleme
cenedywong 3 weeks ago
I Really Like The Video From Your Laser-Schneid-Plotter schneidet Mossgummi bis zu 4mm und Holz bis zu 0,5mm ohne Probleme.
melisantika 3 weeks ago
Your Video Is Very Useful Sharing Laser-Schneid-Plotter schneidet Mossgummi bis zu 4mm und Holz bis zu 0,5mm ohne Probleme.
pemburuiklan 3 weeks ago 2
whats а beautiful sounds :)
MrSmilyfox 3 weeks ago
Does anyone know what thickness balsa wood and sheet metal could be cut with a 2.4W 810nm IR laser, at reasonable speeds?
Thank you...
Danke...
billysgeo 1 month ago
looks perfectly suitable for christmas cookies ;-)
jednoucelovy 1 month ago
Quick and beautiful
preliess 3 months ago
wie macht man dass das der laser nicht durch dass darunter durchgeht?
Metall drunter ?
Comandy96 3 months ago
@Comandy96
ja genau.
am besten, man legt eine dünne metallfolie oder ein Blech unter.
BlueMatrex 3 months ago
coollees teil - genau das brauch ich.. kann man damit auch platinen bearbeiten für smd elektro .... ?
DynamicSun 4 months ago
@DynamicSun
man könnte mit einem UV Laser die Platine belichten, aber das Kupfer bekommt man mit dieser Laserstärke nicht bearbeitet.
BlueMatrex 3 months ago
wie heißt der plotter den du benutzt hast?
19Knorke93 5 months ago
how much money cost this machine?
vvasiljevic 6 months ago
Laser + Lasertreiber mindestens 100€
einen alten Plotter bekommt man für 100 bis 200 euro
der umbau kostet nochmal um die 50 euro.
... außer man hat eh schon alles da.
BlueMatrex 8 months ago
wie viel kostet so ein teil?
illomanGER 8 months ago
can you cut with paper with it ? what kind of focusing tech did you use ?
sigmunt 8 months ago
how much is the machine to buy? the one in the video
irishkendoll 11 months ago
Sorry for my non-existent German. Is this craft foam you are cutting? What thickness? I'm cutting 2mm foam (and 3mm if black) with a 200mW 650nm (visible red) laser LED ) at approx 50mm/min (I'd say 5-10 times slower than yours) and wanted to cut 6mm foam for a project but no matter how I slow it down, it never actually cuts 6mm - the material begins to melt instead of evaporating and never burns all the way through. I guess, it's time to upgrade to 1W :)
MrScriptster 1 year ago
@MrScriptster
more Information about "cutting and material thickness"
Sorry ... in moment ist only in german, but I think it's possible to understand with goggle translate
BlueMatrex 8 months ago
@MrScriptster
you will get more Information about "cutting and material thickness" on my homepage
jtronics.de
but Sorry ... in moment ist only in german, but I think it's possible to understand with goggle translate
BlueMatrex 8 months ago
Hello Mr, this machine your, it make rubber stamp ( rubber to trodat ) ?
terezazevedo 1 year ago
Die Aufhängung vibriert nicht, da es ein Plotter mit einem sehr steifen Rahmen ist.
Das Verfahren macht der Diode auch nichts, da gibt es Anwedungen mit viel schlimmeren Bedingungen.
Die Diode ist jetzt auch schon seit mehreren Tagen im Betrieb, von daher kann es nicht so schlimm sein.
Der Laser hat wirklich eine Wellenlänge von 908nm. Das leuchten kommt durch die sehr hohe Energiedichte und durch den Videochip der Kamera.
BlueMatrex 1 year ago
Sehr schön! Selbst entworfen und gebastelt?
Wieso muss er das Werkzeug holen und wegschaffen?
Sind das wirklich 908nm? das sieht eher nach UV-Laser aus 405nm, oder so was in der Art...
Die Aufhängung mit dem Laser vibriert doch ziemlich stark wenn er schneidet, oder? Meines Wissens sind Laserdioden ziemlich anfällig gegen Vibrationen und Stöße. Ein FASER wäre demnach vielleicht geeigneter.
Feuerkeil 1 year ago