im getting a new pci express x16 card. my limit is £210 and planning on buying a VTX 3D Radeon HD 6950 for £210. is there anything better for this price? ( must be pci express x16) thanks
I got the 750i motherboard and brought a box full of trouble ... xfx support took 4 months to issue a RMA .. i hope if you buy one your not in a hurry to use it
im building my first pc so i got my mobo gt220 and 2gb ddr3 ram but i do not have the cpu yet
so out of curiosity i turned on my pc without the cpu and it turned on but there is 2 problems. It wnt turn offii have to unplug it to turn off and the HDD does not work when its connected to the mobo but when its not connected to the mobo and only connecte to the psu it starts up plz help
so how good is the onboard audio? i have this board but have yet to use the onboard audio, i have a sound blaster audigy card installed (5.1). i have two video cards sli'd but im installing new coolers on them and will have to sacrifice my sound card to allow for more room.
anyone use the onboard audio and has anyone ran it against a sound card for comparison? id hate to lose sound quality if i dont have to.
FUNNY I REMEMBER THIS CARD---WAS THE TOP, AND AT THE MOMENT I BOUGHT ASUS p5KC WITH CORE2DUO,THAT WAS TOP TOP TOP...AND NOW I LOOK TO THIS IS THIS IS FROM STONE AGELOL I JUST ORDERED THE ASUS P6X58D PREMIUM.AND THAT IS REALLY TOP BUT IN TWO YEARS WILL BE AGAIN STONE AGED mobo;THE SCIENCE IS JUST MULTIPLYING MORE AND MORE__ JUST LIKE THE BIBLE REALLY SAYS ..IS COMPLETELY TRUE, USB 3.O, SATA 6GB/S, MY ATI HD5870---CORSAIR 1000W, 4GB DDR 1600MHZ CANT WAIT, SEE MY GAME CHANNEL guitargamery
yeah it's cheap now, because it's over 3 years old. it's all old news but still Great Board but time flys this was expensive Board back in 2007 hardware gets outdated very easly now
I used to think the same way but I found out that we have yet to break the bandwidth of the 1.0 slot, even with the 2.0 spec. And the 2.0 cards are backwards compatible to 1.0 and 1.1.
you don't need to have a mombo that has pci-e x16 2.0 to use a 2.0 card. buy this mombo plus this card and you should be fine XFX PVT98GYDLH GeForce 9800 GT 512MB 256-bit GDDR3 , get the card at newegg. : )
That so that the mother board has acess to plenty of power. Since they built it to be fast it probily requires more power than the average mother board to operate optimaly
if you are using an older Power box with 20 pins instead of full 24 then you need to plug an extra molex into the mobo otherwise the graphics card could choke on power short
if you got the latest 24pin PSU don't worry about it
Had 3 of these LOL. 1st was DOA. 2nd Went Kaput after bios update. 3rd am using right now.
No props, except it will not overclock my q6600 vid 1.325 over 3.0ghz..wah. i think its discontinued now. Anyways its good if you on budget but get from good company which you can send it back if its fucked.
which should i get? this or 730i?!?! i really dont need the 3way sli, only going with 1 video card... and it has 9300 graphics already onboard soo, idk what to get..
idk, if you are getting a graphics card why buy intergrated motherboard. 680i lt is properly cheaper so i would get that 1. But get from good company in case its not working when you get it.
yea i have a sock motherboard with shitty amd 64 3800+, and i bought amd x2 7850 black edition. when i changed cpu my pc started but no screen, yellow light on power button then shut down. everything was in right, pllsss help me anyone what do i do?
W00T!- I just got my new parts a few days ago! Upgraded from a shitty G33 non overclocking motherboard to the 780i Tri SLI motherboard! My New Rig: Antec 900 Rev 2.0 Case Corsair TX 750Watt PSU EVGA 780i Tri SLI Mobo Intel Core 2 Quad Q6600 @3.2GHZ (tons more room to overclock further) Zalman 9700 Heatsink 41C Load- 28C Idle EVGA 8800GT SuperClocked 735/1850/2.2 4GB OCZ HPC Ultra Ram 500GB 32Mb Cache Hard Drive 22" HD WideScreen LCD W/HDMI/Component paired with 19" ViewSonic HD WideScreen LCD
if you guys have a problem installing your PCI cards into this amazing motherboard, check out my puppet video for help, because you'll need it! This is a TOUGH MOTHERBOARD to figure out ;)
booooo this graphics card sucks dont buy please!! will not work search google for no boot xfx 680i 40% of everyone is having a problem with this board!!
I would like to know if OCZ Intel Extreme Edition Dual Channel 4096MB PC12800 DDR3 1600MHz Memory is compatible with XFX nForce 680I LT Socket 775 Motherboard. About that motherboard memory, what is the highest limit for adding more memory...like can it go higher than OCZ Intel Extreme Edition Dual Channel 4096MB PC12800 DDR3 1600MHz Memory? Thanks
how do i update the bios. i have this error were windows makes me restart and it reccomended i update the bios. how do i know if it worked.? i put the bios files on the disc but im not sure if it updated. it stood there waiting for the disc i think because it made my disc drive roar lol. how do i know if it workd?
i got my 780i which the same as 680i ( same bios and all of that stuff) and my highest OC with q6600 was 3.6 just for benchmarking, but it runs on3.2 stable
I got one of these for £50, good board but needs a few MODS to make it more stable at overclocking.
1. Pencil Vdroop MOD, makes the world of a difference...NO VDROOP!!!
2. FLASH the BIOS with a BIOS from the 'full fat' 680i boards and that will give you more voltage and tweaking options aswel as make the board more stable :D
This version looks fucking shit. Mine is black with blue parts on it, and the sli bridge on this one will never fucking fit lmao. Look how small it is and the size of the gap. N1 xfx
depending on the socket tells u which processors u can use if its socket 775 then it will take pretty much any intel processor whereas amd has a different socket i cant remember its name but basically its not socket 775 i hope this helped
for the price it really good. already over a year old (although it will still do everything u need it to) but u could replace it in 1-2 years time for something more up to date and without ripping your balls out through your wallet. =]
Running P5N-d board in my huge Cosmos 1000 case with older 3.73 Extreme dual core that is OC'ed to 4.07ghz. Running two 8800GTX in SLI but getting silly stupid 3Dmark6 score of 2980.
Yes, using latest drivers etc.SLI confirmed. Any help on stepping up this 3Dmark6 score. Note- Runs stable at 59 degree C.
High Temp was anticipated due to 3.73 Extreme dual core was always tempermental.Ran "Pi" stress program for 48 hrs burn in with no problem. HELP anyone??
i need help. i want to reformat my pc but i been told i need my motherboard drivers which i dont have. tried to look but i cant find them on the site. its an old pc like 2001 model. its a biostar something. please help
Do you think i can reformat without them? cause i dont know about much about it. and i cant find the on their site. is it possible that its so old they took it away from their list?
In one week im getting a AMD Phenom Quad 9500, Asus M2N-SLI- nforce 560SLI, 4096 MB DDRII PC-800 with 2x 9500gt geforce grafic cards, Monitor is a 22" Acer P223W. Can anyone tell me how this will work with crysis? Never played it yet and wanted to get started! Cheers
The CPU, GPU's, MOBO are FAIL, You should have gotten Intel e8400, or q6600, then ATi 4870/4850 and Asus P5Q pro, the ram is fine, only if you paid 40-60 dollars, if you paid more, fuck.
I acually own a 680i Motherboard right now and it has done incredibly well for me, i have a Core 2 Quad in there which smoothly overclocked to 3.5GHZ and an EVGA 8800GT SuperClocked which is beastly overclocked to 735/1850/2.2 and runs stable! Its time for an upgrade tho, and im stuck whether or not i should get the EVGA 780i FTW Tri-sli motherboard and a 2nd Superclocked 8800GT or a CrossFire Chipset with a single HD4870 which gets LESS fps than Dual 8800GT specially Superclocked then OC'd.
Nice motherboard but i hearing a lot about its problems that it dies due to heat.Can someone plz tell that its a manufacturing fault cuz im looking to buy one?
I ordered one of these and now its (finally) turned up I think its dead. i herd this happens a lot. It seems to power up, but i get no output through my 8600GT, which worked fine in my cheapo foxconn board. The fans on the 680i start up and i get 3 led's in the top corner, but no output. any suggestions would be helpful
Hard Disk, Ram, Optical Drive, Motherboard, CPU, CPU cooling, Heat paste, Anti-static wrist guard, Video Card, Cables, Power Supply unit, and a Case to put it all in!
ok, thank you, how much do you think all of that will cost? And i have a uncle who works with computer so he should be ale to help me put all of that together.but i want to try it by myself. Can you tell me the estimated cost for all tose coponeents. And have you built one by yourself yet?
half this shit is DOA product, consider you self really lucky if you get one that is stable ... seriously, jus chip 80 more for a full life warrenty evga mb
get the Q6600 save yourself the extra 200 buy a zalman cpu cooler for like 60 dollers and overclock it. i mean with 200 dollers you could go with liquid cooling and have the q6600 in the ghz range stable.
HAHA "Your Lookin At A Box Full Of SPEED!!" That's alot of meth
DANKandDMT 1 month ago in playlist Computer Building
i miss those days :|
PickYourVenom 3 months ago
im getting a new pci express x16 card. my limit is £210 and planning on buying a VTX 3D Radeon HD 6950 for £210. is there anything better for this price? ( must be pci express x16) thanks
iAppleTechUK 8 months ago
this board is just complete ownage got my E5300 Overclocked to 3.5Ghz
crazy6227 10 months ago
Logan is the best ;) That`s TRUE! :)
Johnypcd 11 months ago
I've had this board since release and it's still running strong paired with a Q6600 quad core.
skydiveOU812 1 year ago
I got the 750i motherboard and brought a box full of trouble ... xfx support took 4 months to issue a RMA .. i hope if you buy one your not in a hurry to use it
ieatpeas24 1 year ago
This has been flagged as spam show
hey man can u help me
im building my first pc so i got my mobo gt220 and 2gb ddr3 ram but i do not have the cpu yet
so out of curiosity i turned on my pc without the cpu and it turned on but there is 2 problems. It wnt turn offii have to unplug it to turn off and the HDD does not work when its connected to the mobo but when its not connected to the mobo and only connecte to the psu it starts up plz help
willutw 1 year ago
so how good is the onboard audio? i have this board but have yet to use the onboard audio, i have a sound blaster audigy card installed (5.1). i have two video cards sli'd but im installing new coolers on them and will have to sacrifice my sound card to allow for more room.
anyone use the onboard audio and has anyone ran it against a sound card for comparison? id hate to lose sound quality if i dont have to.
187SicknesS 1 year ago
Hey dud owesome vedio, Could you please suggest me which mobo'll be best for crysis with c2duo e7500.My budget for mobo is 200$.
and also could you please suggest me for a good graphic card my budget for graphic card is 54$.Thanks again.
Arjun007ize 1 year ago
what ever happend with logan?
galeanoandres 1 year ago
@galeanoandres Quit show, and moved to Arizona and now to fucking new york :).
gatler05 1 year ago
@gatler05 ty
galeanoandres 1 year ago
Its PCI 1.0 :(
Snorkelsson 1 year ago
This has been flagged as spam show
FUNNY I REMEMBER THIS CARD---WAS THE TOP, AND AT THE MOMENT I BOUGHT ASUS p5KC WITH CORE2DUO,THAT WAS TOP TOP TOP...AND NOW I LOOK TO THIS IS THIS IS FROM STONE AGELOL I JUST ORDERED THE ASUS P6X58D PREMIUM.AND THAT IS REALLY TOP BUT IN TWO YEARS WILL BE AGAIN STONE AGED mobo;THE SCIENCE IS JUST MULTIPLYING MORE AND MORE__ JUST LIKE THE BIBLE REALLY SAYS ..IS COMPLETELY TRUE, USB 3.O, SATA 6GB/S, MY ATI HD5870---CORSAIR 1000W, 4GB DDR 1600MHZ CANT WAIT, SEE MY GAME CHANNEL guitargamery
bbuteo 1 year ago
yeah it's cheap now, because it's over 3 years old. it's all old news but still Great Board but time flys this was expensive Board back in 2007 hardware gets outdated very easly now
dagenhamcrew 1 year ago
best board i have ever used!
AlaskanFlounder 2 years ago
Looks cool, but you really should get a PCI Express 2.0 motherboard... x16 cards are not common.
FRURMELLL 2 years ago
L
O
L
x16 is not common?! Almost every card made uses x16!
TheGeek1028 2 years ago
Yes 2.0 x16 versions. but not 1.0 x16 versions, they are pretty rare.
FRURMELLL 2 years ago
I used to think the same way but I found out that we have yet to break the bandwidth of the 1.0 slot, even with the 2.0 spec. And the 2.0 cards are backwards compatible to 1.0 and 1.1.
flipicaneze 2 years ago
$50 at their site1
hahaha10001 2 years ago
Comment removed
guystuff100 2 years ago
my brother is building a gaming computer
he has an XFX 680i LT sli and wants to buy an XFX GTX 260 graphics card but the graphics card needs PCIe 2.0 does this mobo have pcie 2.0 or not?
SHOOT3RiG3ARS 2 years ago
yes it is 2.0 it will work
godscuttingyoudown 2 years ago
I hvn that 690i not LT motherboard...If i wan upgrade my grahics card to Galaxy Gts 250 1 gddr 3...Can support??
LcL1314 2 years ago
you don't need to have a mombo that has pci-e x16 2.0 to use a 2.0 card. buy this mombo plus this card and you should be fine XFX PVT98GYDLH GeForce 9800 GT 512MB 256-bit GDDR3 , get the card at newegg. : )
chucknorris687 2 years ago
what is the molex thing at 3:30 for???
spudhead96 2 years ago
That so that the mother board has acess to plenty of power. Since they built it to be fast it probily requires more power than the average mother board to operate optimaly
FPEvideos 2 years ago
PCI-Express lanes power. I haven't seen one so far out, though.
NOXXism 2 years ago
if you are using an older Power box with 20 pins instead of full 24 then you need to plug an extra molex into the mobo otherwise the graphics card could choke on power short
if you got the latest 24pin PSU don't worry about it
godscuttingyoudown 2 years ago
got the EVGA.
LoopInc 2 years ago
touche! :)
linkgj 2 years ago
This guy convinced me to buy it
Had 3 of these LOL. 1st was DOA. 2nd Went Kaput after bios update. 3rd am using right now.
No props, except it will not overclock my q6600 vid 1.325 over 3.0ghz..wah. i think its discontinued now. Anyways its good if you on budget but get from good company which you can send it back if its fucked.
pcangeldust 2 years ago
which should i get? this or 730i?!?! i really dont need the 3way sli, only going with 1 video card... and it has 9300 graphics already onboard soo, idk what to get..
dmoney0015 2 years ago
idk, if you are getting a graphics card why buy intergrated motherboard. 680i lt is properly cheaper so i would get that 1. But get from good company in case its not working when you get it.
pcangeldust 2 years ago
hmm ok, think ill go with the 680, purchasing it now from newegg =]
dmoney0015 2 years ago
is it still available to buy?
pcangeldust 2 years ago
yeh, hard to find, but i found one for 80 bucks
dmoney0015 2 years ago
730i if you dont do much gaming.
LoopInc 2 years ago
wats the diffrence between the 680i sli and the 680i lt sli
cod4source 2 years ago
yea i have a sock motherboard with shitty amd 64 3800+, and i bought amd x2 7850 black edition. when i changed cpu my pc started but no screen, yellow light on power button then shut down. everything was in right, pllsss help me anyone what do i do?
L00peey 2 years ago
Logan!!!!! :D
dwine1234 2 years ago
wts the difrene between the normal 680i and the 680ilt
GH03TR3C0N 2 years ago
randy wheres my knife?!?!
lol
burberrybedroom 2 years ago 2
illmagnified 2 years ago
if you guys have a problem installing your PCI cards into this amazing motherboard, check out my puppet video for help, because you'll need it! This is a TOUGH MOTHERBOARD to figure out ;)
darknkreepy 2 years ago
booooo this graphics card sucks dont buy please!! will not work search google for no boot xfx 680i 40% of everyone is having a problem with this board!!
themightydolla 2 years ago
First off this isn't a graphics card dick, and second it does suck get a better one.
200690101 2 years ago
I would like to know if OCZ Intel Extreme Edition Dual Channel 4096MB PC12800 DDR3 1600MHz Memory is compatible with XFX nForce 680I LT Socket 775 Motherboard. About that motherboard memory, what is the highest limit for adding more memory...like can it go higher than OCZ Intel Extreme Edition Dual Channel 4096MB PC12800 DDR3 1600MHz Memory? Thanks
toPhat4u 2 years ago
You honestly think DDR2 is compatible with DDR3?
SukhoiSu37Terminator 2 years ago 2
The XFX 680i LT can only use DDR2 memory up to 800MHz, not 1600MHz or DDR3 memory. So it is not compatible.
MLBuckProductions 2 years ago
pangit si dieter og si boyboy
teamcaution10 2 years ago
how do i update the bios. i have this error were windows makes me restart and it reccomended i update the bios. how do i know if it worked.? i put the bios files on the disc but im not sure if it updated. it stood there waiting for the disc i think because it made my disc drive roar lol. how do i know if it workd?
photonarbiter 2 years ago
Comment removed
photonarbiter 2 years ago
Logan please back!!! You are the best!
Johnypcd 2 years ago
LOGAAAN
bigdima3 2 years ago
LOGAN IS THE BEST IN TIGER!
QwertyCheeze 2 years ago 22
how well does this mobo overclock the q6600?
crazywin69 2 years ago
i got my 780i which the same as 680i ( same bios and all of that stuff) and my highest OC with q6600 was 3.6 just for benchmarking, but it runs on3.2 stable
arni291 2 years ago
I have this motherboard and my Q6600 is at 3.2ghz but any beyond that is unstable
guitarguy8484 2 years ago
i already got the 750i ftw , cuz i didnt have much money but still i can get my q6600 to 3.2 no prob lol i could go farther but i got a shit cooler
crazywin69 2 years ago
floppy cable whoooo:D
rammsoad2 2 years ago 2
wow nice
oscar7610 2 years ago
Logan is the best!!!!!!!!
Johnypcd 2 years ago
LOGAN!<3
DJBACON8D 3 years ago 13
love it what about price.......
Infalabs 3 years ago
299 with Q6600 quad bundle.
kiba2447 2 years ago
I got one of these for £50, good board but needs a few MODS to make it more stable at overclocking.
1. Pencil Vdroop MOD, makes the world of a difference...NO VDROOP!!!
2. FLASH the BIOS with a BIOS from the 'full fat' 680i boards and that will give you more voltage and tweaking options aswel as make the board more stable :D
antuk15 3 years ago
where did you get it?
liascm 3 years ago
PC World clearance in the UK :)
antuk15 3 years ago
Me too, was it in hull by any chance?
snedie69er 3 years ago
Can you give me some links on how to do this "Pencil" mod and also which bios update should I use
snedie69er 3 years ago
just got one should get it in the mail today!!! Thanks tigerdirect! :D
Turndog2005 3 years ago
This version looks fucking shit. Mine is black with blue parts on it, and the sli bridge on this one will never fucking fit lmao. Look how small it is and the size of the gap. N1 xfx
Skylinerev 3 years ago
Just ordered this board. Heard alot of bad things about it sometime afterwards. What do u think?
EternalMalice1 3 years ago
What things, I'm going to buy one next week?..lol
MegaTechGuy 3 years ago
im making a pc what proceser do u use that will fit it and how do u know if a porosser will fit the motherboard?
thanks
dave
dave2500x 3 years ago
depending on the socket tells u which processors u can use if its socket 775 then it will take pretty much any intel processor whereas amd has a different socket i cant remember its name but basically its not socket 775 i hope this helped
AdilAaronAkhtar 3 years ago
logan rules!!!
bertrab87 3 years ago
That SLI bridge looks to small to go on there.
a7x5631 3 years ago
cost?
persiforever 3 years ago
£65-75 (dont know about $)
for the price it really good. already over a year old (although it will still do everything u need it to) but u could replace it in 1-2 years time for something more up to date and without ripping your balls out through your wallet. =]
Maloclips 3 years ago
i'm 11 years old and i build computers
MY SYS:
e8500@3.8GHZ
2gb ddr3 1600MHZ
2 GTX 280's in sli
asus striker 2 extreme
500GB HDD
jdwn67 3 years ago
i love 3:49 - 3:55 =P
shahunter89 3 years ago
Running P5N-d board in my huge Cosmos 1000 case with older 3.73 Extreme dual core that is OC'ed to 4.07ghz. Running two 8800GTX in SLI but getting silly stupid 3Dmark6 score of 2980.
Yes, using latest drivers etc.SLI confirmed. Any help on stepping up this 3Dmark6 score. Note- Runs stable at 59 degree C.
High Temp was anticipated due to 3.73 Extreme dual core was always tempermental.Ran "Pi" stress program for 48 hrs burn in with no problem. HELP anyone??
BooteyMasta 3 years ago
I love how they talk about Fallout 3 in this video when it didn't come out until a month ago lmao.
BSG75RAPTOR 3 years ago
can this mobo support windows xp pro ?
shahunter89 3 years ago
i love on the sata ports , why would they do that LOL cheers
shahunter89 3 years ago
i need help. i want to reformat my pc but i been told i need my motherboard drivers which i dont have. tried to look but i cant find them on the site. its an old pc like 2001 model. its a biostar something. please help
BiovoltCorp 3 years ago
I wouldn't worry about the drivers
BSG75RAPTOR 3 years ago
Do you think i can reformat without them? cause i dont know about much about it. and i cant find the on their site. is it possible that its so old they took it away from their list?
BiovoltCorp 3 years ago
Can you tell me the rate of the card in India or just the rate in USD.
chinmaygarg05 3 years ago
You can Flash the Bios on the this motherboard to P34
and it thinks its a full SLI board. Makes it wayyy more over clockable.
Before i did it i could only OC my cpu to 3.4 ghz now it OC to 4.3 ghz with a ease..
RawbertDestruct 3 years ago
Is there any motherboard updates to this one that are better?
tombayly13 3 years ago
will work but not sure how good might b ok best thing to do is download the free demo and c whats its like
leetate 3 years ago
In one week im getting a AMD Phenom Quad 9500, Asus M2N-SLI- nforce 560SLI, 4096 MB DDRII PC-800 with 2x 9500gt geforce grafic cards, Monitor is a 22" Acer P223W. Can anyone tell me how this will work with crysis? Never played it yet and wanted to get started! Cheers
dingopatmo 3 years ago
and u fucked up by wanting 2 9500gt
they maybe cheap maybe dx10 but there shit go for 9600's or 8800's
leetate 3 years ago
They were in the very cheap price! Mybe I sell them and buy 9600´s
dingopatmo 3 years ago
your probably getting half the performance of 1 8800 or 9600 by using them 2
leetate 3 years ago
for 6 hundred Euros I didnt ask! But crysis will work or not?
dingopatmo 3 years ago
Yea with 2 9500gts on mid settings it'll work fine but 9800gt or 9600gt much better just saying ;D
martinolatino123 3 years ago
Ati 4870 = best price/performance.
drunken88 3 years ago
The CPU, GPU's, MOBO are FAIL, You should have gotten Intel e8400, or q6600, then ATi 4870/4850 and Asus P5Q pro, the ram is fine, only if you paid 40-60 dollars, if you paid more, fuck.
drunken88 3 years ago
FireWire OMFG! FireWire Can reach up to 400mbps! THATS INZANE ZORHAXXICANHAZCHEESEBURGERROFLCOPTER!
Thomasa95 3 years ago
njan oru karyam parayette ningal e oru blogillottu pokanam
blog: technewscollector*dawt*blogspo t*dawt*com
visit if interested, its gud
paulthecoolest 3 years ago
i got a 680i SLI with a core 2 quad q6600 at 3.2 and a geforce 9800 GTX+ SC at 800/1950/1150. im gunna get 2 more for a 3 way sli!
mda40000 3 years ago
I acually own a 680i Motherboard right now and it has done incredibly well for me, i have a Core 2 Quad in there which smoothly overclocked to 3.5GHZ and an EVGA 8800GT SuperClocked which is beastly overclocked to 735/1850/2.2 and runs stable! Its time for an upgrade tho, and im stuck whether or not i should get the EVGA 780i FTW Tri-sli motherboard and a 2nd Superclocked 8800GT or a CrossFire Chipset with a single HD4870 which gets LESS fps than Dual 8800GT specially Superclocked then OC'd.
illmagnified 3 years ago
haha its a box of speed hahahahahahahaha can i hav some lol
Haribo7777 3 years ago
BEST MOTHERBOARD EVER!!!!!
raybbo 3 years ago
Only miner is that the mobo looks liek shit :/
MiBrada 3 years ago
Firewire! Be careful. haha
xLordJeevesx 3 years ago
does this support the 9800GTX?cause thats a PCI 2.0 (x16)
boegsean 3 years ago
Yes, it has both PCI types on it
666wrathofheaven666 3 years ago
I have it with a q6600 overclocked to 3ghz works really good plus i got my parts from tiger direct you gotta love them never had a problem
siredline08 3 years ago
front side bus always makes me lulz...
drakio99 3 years ago
I HAVE THIS XD lol and i have a Sapphire ATI Radeon HD4850 512MB it ROCKS
falbohunter 3 years ago 2
This comment has received too many negative votes show
arent you to old for the games? arent these for kids and you should do some fun stuff in real life? no? like girls?
tadasc 3 years ago
stfu, logan does have a wife.. and gamers doesn't have to be kids they can also be adults. -_-
Hisdaef 3 years ago 7
hisdaef i totaly agree dude logan is awsome
lee555 3 years ago 2
thats his job..
NoHopeForGays 3 years ago
i stuck with this MOB at 3ghz, this mob even crash in 3.02ghz
heavenlyshin 3 years ago
does this motherboard support duel channel memory?
yopperpo2 3 years ago
yes it does
armatus99 3 years ago
Does it support 45nm Processors? Q9450 for example!
bilalk85 3 years ago
Yeah, they've realeased a new bios for it, which supports the new cpus, but i cant be 100% sure
cdubs896 3 years ago
well i bought the XFX 780i + E8400 + XFX 9600GT(i will Sli soon) so all is good. wohoo!!
bilalk85 3 years ago
Nice motherboard but i hearing a lot about its problems that it dies due to heat.Can someone plz tell that its a manufacturing fault cuz im looking to buy one?
fah369 3 years ago
i'm using one of these with one of the older PNY 8800 GTS which is ridiculously hot but it runs fine so it can take heat no problem
Darkdrakan 3 years ago
agreed, mine runs with a xfx 8800 gts, and my cooling system, well its almost not existent( should cahnge that some time...), no problems
armatus99 3 years ago
yea well mine did die, still waiting on a replacement
killer57 3 years ago
P5N-D is better
680i lt
-Fans are loud
-with 4gb ram i had problems to overclock my q6600(g0) to 3.4
-looks bad ^.^
5 minutes ago i ordered a asus p5q-deluxe because my 680ilt ram ports was damaged.
If you don`t want to have sli go for the p35 or p45 ;)
i´m german so my english isn´t the best :P
strucki200 3 years ago
could you give the full name of the motherboard pls??
dotjeanpaul 3 years ago
I ordered one of these and now its (finally) turned up I think its dead. i herd this happens a lot. It seems to power up, but i get no output through my 8600GT, which worked fine in my cheapo foxconn board. The fans on the 680i start up and i get 3 led's in the top corner, but no output. any suggestions would be helpful
unionjack87 3 years ago
This has been flagged as spam show
heres my computer:
quad 9450, 2.6 ghz
XFX 9800 gtx black adition
XFX 790i sli ultra
2 crosair 2 gig
cooler master real power modular 1000w
CREATIVE SOUND BLASTER X-FI XTREMEGAMER FATAL1TY
2x500gig hitachi(1000)
ante9224 3 years ago
i wonder why tiger direct always plays porno music at the bigginning of all there vids lol
i mean seriously
brandonsexywhitaker 3 years ago 5
awesome board. Tiger has it on their site for 300 dollars and that includes a q6600
ghramer 3 years ago
So its a box... with a box inside... that holds 3 boxes?
lee9293 3 years ago 3
i love the word floppy XD
NorwayGamer 3 years ago
How about the word flappy? Or.. clappy? WOO
xcryinginrainxx 3 years ago 3
Backorederd :'(! had to switch it with a MSI version, still havnt recieved it yet though, i wanted this one :[ didnt feel like waiting
SumAznKid215 3 years ago
If this package includes the RAM memory, and video card, what else do i need to make a computer?
thegreatboss546 3 years ago
This package does NOT include video card,
If you do not know what you need to build a computer, buy a prebuilt system. I do not advise building a system with no knowledge of hardware.
coricaman 3 years ago
im just saying, but what else do i need, can you please tell me?(i making sure that i got every thing? Thanks
thegreatboss546 3 years ago
Hard Disk, Ram, Optical Drive, Motherboard, CPU, CPU cooling, Heat paste, Anti-static wrist guard, Video Card, Cables, Power Supply unit, and a Case to put it all in!
coricaman 3 years ago
ok, thank you, how much do you think all of that will cost? And i have a uncle who works with computer so he should be ale to help me put all of that together.but i want to try it by myself. Can you tell me the estimated cost for all tose coponeents. And have you built one by yourself yet?
thegreatboss546 3 years ago
For a crappy system about $400
For a fair System About $600
For a Good system About $1000
For a Great system About $1500
For a FUXING UBER AWSOME System about $5000
coricaman 3 years ago 3
i need one that can be used everday, word processing, web surfing, and gamin(counter strike is the one that i play). How much is that?
thegreatboss546 3 years ago
About, $1000 Message me and when ever tigerdirect comes back up I will send you a catalog of the parts that you would want.
coricaman 3 years ago
Thank you.
thegreatboss546 3 years ago
este loco bla bla bla, y no la emsambla?
herman64bits 3 years ago
"and that will give you a little higher ping, aswell"
who wants higher ping?
motion9041 3 years ago
yea rofl
bass5445 3 years ago
gonna get one soon with a bundle, just scared thats its gonna be DOA like the other reviews that i've read
SumAznKid215 3 years ago
since this is ddr2 and most graphics cards are ddr3, does anybody know of any good ddr2 graphics crads
btchowned 3 years ago
you dont need ddr2 video cards it doesnt have to be compatibe is different from ram
agearmaster1 3 years ago
\(o_0)/
DDR2 GPUS?
Chea!
You must really like AGP
coricaman 3 years ago
what? is not me is the other dude lol
agearmaster1 3 years ago
does this support PCI-Express 2.0?
SumAznKid215 3 years ago
no it does'nt.
rockytruelyrox 3 years ago
half this shit is DOA product, consider you self really lucky if you get one that is stable ... seriously, jus chip 80 more for a full life warrenty evga mb
angel7slayer 3 years ago 2
I'm going to be ordering one of these in 2 weeks
Pale091 3 years ago
how much does it cost
topdogg1988xx 3 years ago
Don't be stupid and click the link in the description...
its 159.99 (-10 mail in rebate)
1337AsianProductions 3 years ago
just so amazing good movie! he really gives you all your info you need if you want new motherboard!" :D
Etern1ty2k 3 years ago
right now tiger has them for 99.99 dollars from 160-60=99 awesome deal thanks tiger
comp1usa 3 years ago 3
will a 500 watt psu be sufficient for this mobo?
triclops9 3 years ago
no get 600+
noujaadw 3 years ago
was wondering the same thing. only have a 550 what psu with a cheap p5k mobo.
ChristopherLucky 3 years ago
Yea looks like a great mobo i am getting 1 in a few days...W00T!!
leon9379 3 years ago
great mobo, got it when TD was selling it for $99! awesome, fast, best buy ever :)
nogood510 3 years ago
is it really so loud?
KillaMaster007 3 years ago
where the evga one at?
Happyfagg 3 years ago
Does this have its own onboard sound or do you need a seperate one?
Zon3y 3 years ago
im pretty sure its onboard not sure though
dardraa 3 years ago
Does this have its own onboard sound or do you need a seperate one?
Zon3y 3 years ago
yes it has onboard 7.1 sound
johnster23 3 years ago
is there a big difference between 2.66ghz quad-core and 2.4ghz quad-core.
s1l3nc3r10 3 years ago
slight speed difference. that's all.
alldaygamer 3 years ago
but i just want to know is it worth the $200 extra u have to pay for the 2.6 quad-core
s1l3nc3r10 3 years ago
get the Q6600 save yourself the extra 200 buy a zalman cpu cooler for like 60 dollers and overclock it. i mean with 200 dollers you could go with liquid cooling and have the q6600 in the ghz range stable.
spitesuicide19 3 years ago
What does PCI mean? I'm trying to learn all these computer terms. Too confusing.
GDDR3, PCI 16, 1GB, ATI, etc....
DreadRaptor85 3 years ago