Road Ready flight case: Roadready RRCDJDNS10W

[ciapolini3p]

LINK amazon.com/exec/obidos/ASIN/B0­050P3J0I/catgr-musicalinstrume­nts-20

Product Description

Road Ready

Our new RRDJCONTROLL Laptop Trayz case integrates a ventilated tilting laptop tray directly into the case. With the ability to rotate 360° and featuring up to 4'' of height adjustability, our laptop tray is the most advanced in the industry and gives you complete control over your ...

For more details please copy the Amazon link above in your browser

[TheTreinfreak1]

when you bought it was only the case or to set it? and there were cables?

[TheTreinfreak1]

when you bought it was only the case or to set it?

[nachoruiz]

anyone knows if the holes for the cables are closed or opened?

[flama13]

pioneer do this to

[sk8rleolopez]

i have only one question... how do you lock it so that when you travel out of the country or where ever no one wll be able to get in to it?

[stefanmplayer]

anyone please help: i need like EXACTLY this case the only difference is that i need to fit a 12'' mixer (numark 5000fx) in instead of a djm 400

please help i really need a case but the only one that is available in my country is a zomo and it doesn't have wheels and all the stuff includeing a big case is to heavy to carry around

[stefanmplayer]

does anyone know if there is a road ready model like this case for 2x cdj 400 and a numark 5000fx? (12'' club mixer)

please respond i need a case quickly:p)

[nikos833]

Complimenti e' un bel flight-case

[cyberscape]

i had one made its a hell lot cheaper though,

[holycrapomglol]

very good video, i wanted to buy one of these.

[AaronLeslieBrooks]

Could an American Audio mx1400 mixer fit in this flightcase?

[djadsellman]

great vid j

this flightcase is alot better then the pioneer case

[DjREALATY]

ok, been looking for cases for the gear and I have come to realize that I am confused on the size to get. Do the cases usually go by width,height or depth. I have a cdj 200, behringer dx626 mixer and a stanton 3.14

DJ Realaty USA

[egosismic]

ive got the road ready plycase dor djm 600 and cdj 800

and the case was 6 months outdoor under a tree and wen my fiend give to me the buterflys steal closing , offcourse whit a bit of oxid de only thing was the intirior the sides were come out but stuck it again

durable case

: ]

[djadnane]

Can you put Denon dsn 1200 in there instead of does pioneers?

[juliandinho7]

what is the price of this?? it would be perfect for me i have the same exact set up.

[KDN322]

how much did that cost?

[jkwits]

Be aware I have this style of case. With all my gear in the airline would not except it because it was above the max weight limit(I had to put by mixer in another suitcase at the airport which was dodgy). They are great cases but buying separate cases for each piece of gear is perhaps better if you are planning on flying with your gear.

[ernanimartins]

Hello, I have a pair of CDJ-400 and a DJM-800, could you help me finding a case that would fit this kit from this manufacturer? I could not find this info in their site. They just make bigger cases for CDJ-1000 or 800 and DJM-800. Shame on right? Great work dude. I will post my tenminmix video soon. Cheers.

[bagleyfilms]

"pieces of kit" hilarious

[FunkyRob]

I use the RRDJCD10W case. It doesn't have that cool wire cover plate in the back like yours.

Mine fits CDJ1000/CDJ800, DENON DNS 5000/DNS 3000/DNS3500, TECHNICS SL-DZ1200 OR STANTON.

Road Ready and Oddesey

I currently gig with the Stanton player and have couple of SL-DZ1200's on my wish list, it's perfect for me.

Though I drilled a whole on the bottom to run cables through.

Road Ready and Odyssey seem to be the same quality to me.

[lez8x8]

i got the same flight case for the CDJ-80s. worth the money. i can take my stuff to gigs all in the one box.

[Gr33nyG]

Hey, something Ive really wanted to know,

do the flight cases that specify 'fits 2x CDJ 200's and 1 x DJM 400' also fit 2 x CDJ 400's instead of the 200's?

I guess the question Im really asking is are the CDJ 400's and 200's the same dimensions? Or do I have to find a case designed for 400's?

Thank

[groovindj]

Yes, the CDJ-400s will fit (in the Road Ready cases anyway). I have my CDJ-400s in a RR case designed for CDJ-200s.

[syntse]

case closed :)

[theillestboYee]

I need to get myself some cases for my gear!

[drukenhard]

It's a very sloppy fit.....your gear will bounce around inside it!

I have 2 Numark TTX USB turntables, a Pioneer DJM909 mixer and my Serato Scratch Live box stashed underneath and it all fits in very snuggly...much better than this one (and heavier due to the bigger gear inside)

It has the holes between sections and removable panel at the front of the mixer also.....pretty standard....except I had to cut the padding a little to fit the TTX's in (they're bigger than 1200's)

[ellaskins]

Do you honestly think i would put a set of cdj's in here with the chance of them bouncing around??, once the top is on , they are going no where!! thanks j

[Ultrasteve1969]

i got one tip to give you : Dont ship your case by plane, you will get a very unfortunate surprise.

[marc4859]

Why's that?

[Ultrasteve1969]

because its cheap. I'm not sure it meets ATA-300 requirements ,checK it out, if you can find it :

Air Transportation Associasion cat. 300

[nachoruiz]

why?

[Ultrasteve1969]

why are you getting nef feedbacks, i think you are right. its a sloppy fit.

Those cases are made in china, very very cheap.

I've been building cases for over 15 years. I check one of those out, its not that great, no stapples in the aluminium, cheap rivet, not even multi-grip, the hardware especially the latches are poorly made.

There is a golden rule :

YOU GET WHAT YOU PAY FOR! period

[drukenhard]

Maybe they bought the same cheap case and took it personally?

Even if there is room for you gear to move just a little, once there is pressure on top (from the rubber in the lid) it will apply a large amount of unwanted force on sliders and knobs!

Would you push your faders against their direction of travel when using them......hell no.....unless you were getting paid to destroy them!

[Ultrasteve1969]

I dont know, we found that these cases come from : Foshan Nanhai Huasen Metalwork Factory or maybe another one.

We will be buying one and dissassembling it to analyse its materials and construction.

The way we build them is quite simple : we put 1/2" or 1" Esterfoam (dont use Etherfoam, i turns green in a few months, it starts to crumble, and smells bad) around and on the bottom of the unit, for the top, we install it around the buttons. The buttons themselves should be free.

[xefipo]

J., you should also check out some Odyssey cases. These cases have laptop stands.

odysseygear[dot]com

[basscreators]

thank you j!! we're looking for cases like this.

[Maxsdiscos]

you can always take the kit out of the flightcase, but you'd buy a more basic one.

[rolley05]

hey does anyone know where i can get a flight case that will hold 4 decks?

"2 turntables and 2 cd players"

[djmixture]

Very nice and informative! I really want that case now!!

[DJOmega80]

They are expensive. Besides making you look professional, it also protects your investment.

[zombiesonar]

Nice kit, Ive been lookin at the full turntable coffins from roadready, this helps a lot. Thanks mate :)

[mrclarkedj]

to zombiesonar... You won't be able to lift a twin turntable and mixer coffin case. Unless you're john evans off of record breakers!

[zombiesonar]

mate, did it not occur to you that road ready make all sorts of flight cases?

Quote "Road Ready DJDJM800W Roadcase Coffin - Road Ready Coffin to suit 2x SL1200MKII & DJM800 (Allows for the depth DJM800 Mixer)"

The reason I said thanks for this vid is to see the level of quality (sharp or burred metal bits, insulation and features).

[mrclarkedj]

zombiesonar; Yes, i know they do. I have a DJM600 + turntables case.... but its seriously heavy! I don't see what you mean there? Ok mine's made by KAM not Roadready, but its a 2 man lift really.

[drukenhard]

I can lift mine quite easily into and out of the car.....it has wheels for any in between bits as well.

Don't let the weight deter you, just harden the fuck up!

[DavyFoks]

Nice vid! Some flight cases don't have holes in it, so i now know what to buy :)