It idles high because Mazda wanted the engine to warm up as fast as possible so Idiots dont damage the engine. push the clutch in and put the gear in first and start it it will idle at 1000. Im not sure if that is JDM only though.
I know you posted this like 5 months ago but... the idle stays at 1500 for a few mins till the engine is fully warmed up, then it drops to around 750.
@ lizergowy, The exhaust sounds terrible, was it the sound quality of the video or the actually car.
@RotarFlow huh, all Fc's well when the 13b first came out mazda made it so when you cold start it it would go up around 3k or twenty somthing but yea every 15 or 20 secnds it would drop down till it hit operating idle.
@1990lumina ... you want the engine to rev for a bit when you start it to warm the apex seals so you dont warp them and make them leak, or do you like destroying good engines?
It idles high because Mazda wanted the engine to warm up as fast as possible so Idiots dont damage the engine. push the clutch in and put the gear in first and start it it will idle at 1000. Im not sure if that is JDM only though.
Ravyth323 1 year ago
fajne autko!
samo tak wchodzi i schodzi na obroty na zimnym silniku?
corveGT1PL 1 year ago
@corveGT1PL Tak
lizergowy 1 year ago
@corveGT1PL automatyka rozruchowa czyli automatyczne ssanie-aż silnik złapie temperaturę:)
vitalioz 1 year ago
is that a 2x2? i've been looking for one for some time now everyone sells the 2 seater but no one sells the 2x2
musclekid13 2 years ago
I know you posted this like 5 months ago but... the idle stays at 1500 for a few mins till the engine is fully warmed up, then it drops to around 750.
@ lizergowy, The exhaust sounds terrible, was it the sound quality of the video or the actually car.
Primos003 2 years ago
really? mine starts up cold and idles at around 700 till warmed....
RotarFlow 2 years ago
@RotarFlow huh, all Fc's well when the 13b first came out mazda made it so when you cold start it it would go up around 3k or twenty somthing but yea every 15 or 20 secnds it would drop down till it hit operating idle.
My gtu did it and my five letter too
fc3sghost 1 year ago
You can tap the throttle to drop the idle down to where it should be normally.
1990lumina 2 years ago
@1990lumina ... you want the engine to rev for a bit when you start it to warm the apex seals so you dont warp them and make them leak, or do you like destroying good engines?
LordFabs 1 year ago
damn dude what is ur idle, 1500?
elemineseslapolla 3 years ago
lol no rx-7's codl start at 3000 rpms for a like 15 seconds or so
KillaBlackBlaze 3 years ago 3
still seems to settle pretty high, if the end is what it actually idles at
Stevobob 2 years ago
This is for building oil pressure. Makes the combustion chamber tighter.
TepesVlad80 2 years ago
@Stevobob actually it's not idling at the end
LordFabs 1 year ago