@ulsig95 depends what heatsink you're getting. the standard heatsink will pop right off when you unlock[unscrew] the 4 push-pins. high-quality heatsinks may require a bracket that must be placed on the back of the motherboard in order to support the massive weight of said heatsink. so, in short, if your new heatsink has a backing...yes, you will need to take out your motherboard.
A couple things I really like about this case is that the PSU is on the bottom and you can mount it either way. Corsair had genius with the 800D because there's a vent on the bottom of the case for the PSU fan, so the air going thru the PSU never enters the case.
@thehill251 sure will. however it'l keep you from putting a HDD in one of the slots. but there are 6 HDD slots so I think you'll be good. btw, you'll have to take off that HDD fan for it to fit.
if you read the annotations, the case shown in this video has not been modded at all. you can easily route cables through those pre-drilled hole. just get cable ties from the fruit section at safeway and you'll be good.
Is the Airflow on this the same as the 902? or atleast on par? Because i accidently ordered this case instead ofhte 902 from new egg, but I'll keep it if it has Good Airflow like the 902, I also don't wanna spend over 40$ just for S&H.
Hmmm, i advice you to get the Antec 902... the updated 900... it's black inside, which looks way better. It just looks better. And the cables will fit.. this is only a mid tower case, so the 24 pin and the 8 pin cable will be fine.
I got a GTX 275, and it didn't fit with the fan bracket by less than 1mm. When I removed the bracket, it fit, (luckily i didn't have to remove the entire HDD Cage) and I still had about 1.5" clearance, plus clearance to the side, and I got to keep the extra fan and 3 HDD slots. So for all wondering, the 275 WILL fit, providing you remove the middle fan bracket.
i have no idea. the only way i could find out would be to google the measurements of the two cases. which you can do yourself. sorry but i'm extremely lazy ahaha
I wished you turned off the music in the backround its distracting. Alot of YT vids the have music in the backround, I find it ironic they all have forgot to turn off the music. No need for the music to compete with the naration
i didn't forget to turn em off. i just didn't want to have to edit music in. kept most of the audience entertained. i just will find it hella boring talking to a camera in my room without any music on >.>
i went to microcenter yesterday and i was checkin thm out they werent predrill but i did end up goin to tigerdirect and gettin the NZXT Tempest which does have predrilled wholes for 99$
Got mine off newegg when it was on sale for 59.99 and it came with 4 blue LED fans... Good case only gripe is no motherboard tray...woulda been nice but no biggie.
Antec 900 Black ATX Mid Tower..$109.99 GA-EX58-UD5 LGA 1366 X58 Motherboard..$288.99 Intel Core i7 920 2.66GHz Quad-Core..$294.99 G.SKILL PI 6GB(3 x 2GB) DDR3 1600..$249.99 Western Digital 500GB 7200 RPM SATA..$74.99 SAMSUNG 22X DVD±R Burner SATA Model..$27.99 HIS ATI HD4870 1GB 256bit video card..$224.99 CORSAIR ATX 12v 850W Power Supply..$139.99 Vista Home Premium SP1 64-bit..$99.99 Total..$1,511.91 newegg. I already have keyboard mouse monitor : )
oh wait up. sht. those are molex. i just went in and looked at em. sorry about that.
thought i do recommend you look at the NZXT Tempest. it is very similiar to this case but doesn't have as big of a dust problem and has a better window.
i was actually lookin at the corsair 650W, but they all seem to have PCI x6/x8 and e-sata, no molexes anymore, i think it depends on when you bought it, because the new ones ship without molex. i currently have a thermaltake 850W on my list. But does the case come with a adapter?
i have no idea what you're talking about. try buying the PSU from newegg. their corsair 650w still has 4 pin molex. they also have 3 different thermaltake 850w models. all 3 of which have 4 pin molex connectors.
hope im not too late but DO NOT get a 15 inch cathode. i can barely fit a 12 inch on the bottom and top of my side panel without it running into other stuff.
lol, pretty gd review just didn't seem to know what you were talking about, maybe you should have redone it after thinking about what you were going to say ^^ but yeah did show better views of the case etc than others, thanks for that, 4 stars due to the hiccoughs etc.
on the nzxt not that much. but on the antec 900 that grill for the side fan does block a good deal of stuff. it isn't as easy to see through as you'd expect.
What GPU you putting in this? A friend has one with 9800GTX and he say's it only just fits. Just wanting to know, as I'm getting this case + HD 4850 and it's a fraction bigger than 9800GTX (hope it fits! :p).
i have a 4870 and it fits fine as long as you don't put the harddrive on the same level as the gpu [your hdd should be at the bottom of the case anyway]
I've been thinking about it but i've run into these problems:
1. my 4870 is louder than my antec 900 fans and it would cause the sound to be mis-informative.
2. there is no way i can set a standard that you can base the sound off of. without a reference you could just turn your speakers all the way up and say my fans are hella loud.
oh you play CA. ahaha i played that game for a week. it was way too easy. i had like 4KD after playing for only like 3 days ~.~
but yeah yer GPU will run CA great. and SLI-ing won't do anything. only certain games/apps support SLI. and since your motherboard has an IP45 chipset you won't be able to SLI at all.
ahaha. i was thinking about playing linkin park but i was too lazy to change the song. and everybody likes linkin park so i know you woulda liked that xD
actually there are 8 holes for screws. it depends which 6 you use. one set of 6 are used for micro atx and another variation of 6 are used for standard atx.
you can't really tell with my low-quality camera...try watching 3dgameman's review and you'll see what i'm talking about.
I like this review. I don't think any other review of this case showed the other side of the case where you can do cable management. I wasn't sure if they already provided holes or not for it. Nj
oh how do i explain this...it's not a break away molex connector. the molex on the fan is double-sided and allows you to connect more and more molex to a single molex connected to your PSU. i know it might be hard to understand without a picture...i might have to get you one.
all you need to know is that i have my 220mm and both front 120mms connected to the same PSU molex connector.
Bily Talent gs man
DJFULARA 7 months ago
Antec,very good!
DeutscherRitterorden 1 year ago
Good old billy talent in the background
roadkill1001 1 year ago
i got the same and i need to change my Cooler system... soo do i need to take out the motherboard to take out the CPU cooler???
ulsig95 1 year ago
@ulsig95 depends what heatsink you're getting. the standard heatsink will pop right off when you unlock[unscrew] the 4 push-pins. high-quality heatsinks may require a bracket that must be placed on the back of the motherboard in order to support the massive weight of said heatsink. so, in short, if your new heatsink has a backing...yes, you will need to take out your motherboard.
sk8rhippie 1 year ago
A couple things I really like about this case is that the PSU is on the bottom and you can mount it either way. Corsair had genius with the 800D because there's a vent on the bottom of the case for the PSU fan, so the air going thru the PSU never enters the case.
GlycerinZ 1 year ago
I got the same case, Very good
kd84afc 1 year ago
anyone know if the radeon 5970 will fit in the antec 900 ?
thehill251 1 year ago
@thehill251 sure will. however it'l keep you from putting a HDD in one of the slots. but there are 6 HDD slots so I think you'll be good. btw, you'll have to take off that HDD fan for it to fit.
sk8rhippie 1 year ago
@sk8rhippie Okay, thanks :)
thehill251 1 year ago
nice !
DeutscherRitterorden 1 year ago
does it come wit the cathode lights?
thucster5 1 year ago
@thucster5 no, it only comes with LED fans.
sk8rhippie 1 year ago
@sk8rhippie ahhhhh i c, ty. but do u think the led lights would light up the whole case at night? cuz i kind want a glowly looking case
thucster5 1 year ago
@thucster5 the LED's give a "glow" at night. cathodes will make it more of like...an epic burst of color. lol.
sk8rhippie 1 year ago
BILLY TALENT!!!
btw that port beside the mic jack is a 6 pin fire wire
otyroo2 1 year ago
Amateur hour. These kids who get on here and make a pissy video trying to be big shots are giving the products a bad wrap.
If you are going to do a review, study up and do it properly. It's a flippin' case, how hard can it be???
jaydenent 1 year ago
@jaydenent every 1 has to learn somtime
SwanSong2156 1 year ago
that was one good review! but everything just went wrong for you :D haha
rbrtostone 2 years ago
So it comes with the lights? Which color?
HarpyTV 2 years ago
blue. only the fans light up.
sk8rhippie 2 years ago
ANTEC 900
AND BILLY TALENT FTW!!
fatmenrolling 2 years ago 2
What connections do the fans have?
FormulaOneObsessed 2 years ago
4-pin molex
sk8rhippie 2 years ago
got this case yesterday! it's amazing :P
also nice music !
DediXD 2 years ago
where can i get a sound activated module for leds?
pilot764 2 years ago
i used to buy from the xoxide website...but it seems to be down at the moment
sk8rhippie 2 years ago
its hard to hear u too much bass
kolbiie 2 years ago
yeaa billy talent fuckin love them, good review too
xchlppprsx 2 years ago
is there a way to have "cable management" in this case without modding it?
tuberoako777 2 years ago
if you read the annotations, the case shown in this video has not been modded at all. you can easily route cables through those pre-drilled hole. just get cable ties from the fruit section at safeway and you'll be good.
sk8rhippie 2 years ago
thanks for the quick reply man.. really appreciate it..
nice vid! very informative :D
tuberoako777 2 years ago
scrub review
landraider101 2 years ago
for a scrub like you.
sk8rhippie 2 years ago
nice reciew man (:
HerrKanin93 2 years ago
why would you put all fans on intake?
Would it not be better to put the top fan on outtake for circulation?
lineridemidget 2 years ago
who said they were putting all fans on intake? and i don't think the top fan can even be an intake without modifications to the case.
sk8rhippie 2 years ago
when you paused at 7:40 i said beast right when you did haha.
flyxflipxguy 2 years ago
Is the Airflow on this the same as the 902? or atleast on par? Because i accidently ordered this case instead ofhte 902 from new egg, but I'll keep it if it has Good Airflow like the 902, I also don't wanna spend over 40$ just for S&H.
CoolConejo 2 years ago
exact same except for that the antec 900 doesn't have dust filters.
sk8rhippie 2 years ago
the antec mk 2 has
utting54 2 years ago
Hey I have a kind of noob question
Can I check my PC temp from the desktop
It has been sometime since I have been interested in checking that now I am kind of getting back into upgrading my PC and checking my performance.
lazadar 2 years ago
what temperatures are you interested in keeping track of? cpu? case? ram? hdd? chipsets?
sk8rhippie 2 years ago
Raybob95 thanks man thats what i need to know finally........
insanepoop17 2 years ago
the coolermaster destroies this case, the 902 and the 1200, 'nuf said
TankyPanky1 2 years ago
hell yeah it does. there's a reason it costs so much more aha.
sk8rhippie 2 years ago
how much is the case
RuNiTzSpAnKy 2 years ago
newegg.
sk8rhippie 2 years ago
sorry? the coolermaster you're saying is BETTER or WORSE? I'm buying the 900 - it's important to know
Crawlerz246 2 years ago
if you're getting the antec 900 anywhere sub 70 bux then get it otherwise save your money.
DaFinestx 2 years ago
-below 70$? is that possible?
-is the 902 really better?
-I wanted the smilodon case but apparently it's got small fans :/ I plan to overclock a bit so coolng's important.
Crawlerz246 2 years ago
Please next time you review a product don't play music xD
youcandownloadthis 2 years ago
nice one dude
but will a RADEON HD4870 TOXIC EDITION fit inside it with side fan installed
CROSSFIRE011 2 years ago
is the toxic edition any bigger than a 4870? my 4870 is a good inch and a half from the side fan.
sk8rhippie 2 years ago
yes it's bigger due to the Vapor-X cooling and it's heat pipes
anyway thanks
CROSSFIRE011 2 years ago
This case fit's all cards
ryanbycraft 2 years ago
I heard that I shd remove th middle fan bracket to make my Radeon HD4870 fit inside it
is this right
CROSSFIRE011 2 years ago
Yes, But you shouldn't need extra cooling for your GPUs
You only need it when you are uses tri sli with overclocked cards
ryanbycraft 2 years ago
thanks
I have another last question
I am going to get the ANTEC 900 this week end
my PSU wires which is connected to the MOBO are 35 cm long will it fit inside it or it will be a proplem
CROSSFIRE011 2 years ago
Hmmm, i advice you to get the Antec 902... the updated 900... it's black inside, which looks way better. It just looks better. And the cables will fit.. this is only a mid tower case, so the 24 pin and the 8 pin cable will be fine.
ryanbycraft 2 years ago
can't get it here in Egypt we only have the Antec 900, 1200 , p182
CROSSFIRE011 2 years ago
Thats a shame man. the 902 is the smaller version of the 1200... 900 is still an amasing
ryanbycraft 2 years ago
I got a GTX 275, and it didn't fit with the fan bracket by less than 1mm. When I removed the bracket, it fit, (luckily i didn't have to remove the entire HDD Cage) and I still had about 1.5" clearance, plus clearance to the side, and I got to keep the extra fan and 3 HDD slots. So for all wondering, the 275 WILL fit, providing you remove the middle fan bracket.
Raybob95 2 years ago
Whats the song at the start?
quesomanrulz 2 years ago
3 songs played, in this order:
this suffering - billy talent
worker bees - billy talent
pins and needle - billy talent
sk8rhippie 2 years ago
Thanks Bro!
quesomanrulz 2 years ago
haha funny video man !
but also informative cheers man ill be buying this case now !
p.s. how much bigger is it than a sopranos dx ?? thanks Q!"
jaboyle 2 years ago
i have no idea. the only way i could find out would be to google the measurements of the two cases. which you can do yourself. sorry but i'm extremely lazy ahaha
sk8rhippie 2 years ago
HELL YEAH! THIS VIDEO IS AWESOME!
Travisnitor 2 years ago
I wished you turned off the music in the backround its distracting. Alot of YT vids the have music in the backround, I find it ironic they all have forgot to turn off the music. No need for the music to compete with the naration
TSOfan 2 years ago
i didn't forget to turn em off. i just didn't want to have to edit music in. kept most of the audience entertained. i just will find it hella boring talking to a camera in my room without any music on >.>
sk8rhippie 2 years ago
I'm just kidding anyway, no biggie. I like your idea of adding more holes for wire managment. What kind of drill attachment did you use?
TSOfan 2 years ago
apparently i have a newer model of the antec 900. the holes cam predrilled. i bought this back in the summer of 08.
sk8rhippie 2 years ago
did u have to drill holes to set it up
satiric0n 2 years ago
wait so this is the ANTEC 900 NOT the antec 902 right cuz everyone says the antec 900 does not come with predrilled cable management holes
w0z3223 2 years ago
this video is of the antec 900.
the old models of the antec 900 didn't come with predrilled holes. as of around june 08 they started coming predrilled.
sk8rhippie 2 years ago
i went to microcenter yesterday and i was checkin thm out they werent predrill but i did end up goin to tigerdirect and gettin the NZXT Tempest which does have predrilled wholes for 99$
w0z3223 2 years ago
the store must've had an old model.
but i myself like the tempest more than the antec 900. so good choice aha
sk8rhippie 2 years ago
ya the only thing i like better on the antec 900 rather thn the tempest is the antec has sweet ass grills.. more industrial lookin u know.
w0z3223 2 years ago
isn't that partly because the tempest is filtered? but the sidefan on it looks really out of place lol.
otherwise yeah, antec's honeycomb pattern is dope XD
sk8rhippie 2 years ago
good ass review im gettin mine this weekend at microcenter.. 2 quick questions
1. do u think u will need 24 pin and 4 pin motherboard extension cables for a standard atx power supply to reach the motherboard.
and
2 is this worth 100$
w0z3223 2 years ago
well the antec 902 has some improvements such as fan filters. so u might wanna think of that.
there's enough room for me to route my 24pin through the predrilled holes and into the mobo. no extension needed.
id say this is worth $90.
sk8rhippie 2 years ago
Got mine off newegg when it was on sale for 59.99 and it came with 4 blue LED fans... Good case only gripe is no motherboard tray...woulda been nice but no biggie.
Skr3wy 2 years ago
Does the case come with all the optional fans? Thanks in advance :D
LummberHero 3 years ago
not the side fan or the HDD fan, but everything else yeah.
sk8rhippie 3 years ago
With this case you have to drill at least 3 more holes.
ferret6677 3 years ago
...to do what?
sk8rhippie 3 years ago
you must drill holes for the case fans for LED i think that he means. i wanna buy it to but must you drill the holes?
hardcore0nick 2 years ago
i dont see what LED you would need to drill a hole for...
but in this video, you see a completely unmodded case. all the holes were predrilled when i took them out of the case.
sk8rhippie 2 years ago
ok thnx some poeple said you must drill holes :S but i'm going to buy it :D
hardcore0nick 2 years ago
you do know the newer version, the antec 902 has come out.
it comes with dust filters, a slightly different design, and a black interior.
sk8rhippie 2 years ago
Is it possible to turn off the LED lights while keeping the fans running?
axkingz 3 years ago
What does the reset switch do?
TheLittleWorldofGaz 3 years ago
well dear, it resets your computer XD
sk8rhippie 3 years ago
like reboots ? soz im confused :P and a noob
TheLittleWorldofGaz 3 years ago
it's pretty much like pressing the power button twice aha
sk8rhippie 3 years ago
sry mjen i ma germanand i ma using school englisc;)
superjuben 3 years ago
Hey hows this case, i was thinking about geting it to case my 680i lt sli motherboard and my 9800GTX + you think it will fit them?
applejacks444 3 years ago
easily. that card is just as long as my 4870.
only thing is you can't have a HDD on the slot right infront of wherever your GPU ends up being.
that shouldn't be hard to deal with as there are 6 slots to put your HDD. not to mention they can be moved to the top of the case.
sk8rhippie 3 years ago
Whats the song in the background?
TheHaloMan2009 3 years ago
3 songs played, in this order:
this suffering - billy talent
worker bees - billy talent
pins and needle - billy talent
sk8rhippie 3 years ago
needles*
sk8rhippie 3 years ago
how much power conectors does the antec twelve hundred need for the fans 5 4-pin?
superjuben 3 years ago
i have an antec 900, not 1200...but if you used proper grammer/punctuation i could probably answer your question[s] lol.
sk8rhippie 3 years ago
Insulting him helps....how? Why are you watching this if you know so much about the case already anyway?
theJ4ZZ 3 years ago 2
waaaaa taahhhh Lol
ibanez1andrew 3 years ago
i already corrected that in the video. i hope you've learned how to read annotations. they're there for a reason.
it's informative to all the other people watching/commenting this vid. i did this for them, not you.
sk8rhippie 3 years ago
if you getting gamer green fans can i have one of your old blue ones!!!! haha jk nice video
XFoxtailProductionsX 3 years ago
for $10 each ^.^
sk8rhippie 3 years ago
"au.... it hurt like a bitch..." hahaha xD
sigge19 3 years ago
can you get me one to help me build a core i7 PC? : )
2point6x4 3 years ago
get togheter about 2ks or 3 and sure
Leoooonard 3 years ago
Comment removed
2point6x4 3 years ago
2point6x4 3 years ago
nice build...but yer missing a heatsink for yer cpu. stock wont cut it.
sk8rhippie 3 years ago
your right, heres one,
Noctua NH-U12P SE1366 120mm SSO CPU Cooler - Retail $84.99
2point6x4 3 years ago
looks good. have fun ^.^
get the nzxt tempest. not antec 900.
sk8rhippie 3 years ago
Great review man, nice to see it from a new perspective.
dblmntgum 3 years ago
im getting that case and what song i that at the start ???
ballandbiscuit1 3 years ago
this suffering - billy talent =D
sk8rhippie 3 years ago
haha nice review man getting it soon
R6818 3 years ago
thats nice. was getting worried about it only had molex connectors.
Think im getting this case for my first build!
axkingz 3 years ago
oh wait up. sht. those are molex. i just went in and looked at em. sorry about that.
thought i do recommend you look at the NZXT Tempest. it is very similiar to this case but doesn't have as big of a dust problem and has a better window.
sk8rhippie 3 years ago
but there are molex AND e-sata connectors right? The new power supplies only have e-sata, or else i will need some sort of adapter.
ok, ill take a look at it.
axkingz 3 years ago
nah shit's molex male on one side and molex female on the other. what PSU u tying to buy? corsair 650w-1000w models still have molex o.o
sk8rhippie 3 years ago
i was actually lookin at the corsair 650W, but they all seem to have PCI x6/x8 and e-sata, no molexes anymore, i think it depends on when you bought it, because the new ones ship without molex. i currently have a thermaltake 850W on my list. But does the case come with a adapter?
axkingz 3 years ago
i have no idea what you're talking about. try buying the PSU from newegg. their corsair 650w still has 4 pin molex. they also have 3 different thermaltake 850w models. all 3 of which have 4 pin molex connectors.
sk8rhippie 3 years ago
thought they had gone away from molex. Anyways, i think ill just get some adapters and i should be all good.
axkingz 3 years ago
nice review. i noticed the fans got some big connectors for power, what type are they?
axkingz 3 years ago
hope im not too late but DO NOT get a 15 inch cathode. i can barely fit a 12 inch on the bottom and top of my side panel without it running into other stuff.
dadee433 3 years ago
no you're not too late...but have u tried fitting it in that gap right under the 220mm fan?
it looks thick enough and i know it's long enough because i've measured 16.5in.
sk8rhippie 3 years ago
lol, pretty gd review just didn't seem to know what you were talking about, maybe you should have redone it after thinking about what you were going to say ^^ but yeah did show better views of the case etc than others, thanks for that, 4 stars due to the hiccoughs etc.
bloodied8hands 3 years ago
i dont know if i should get this caes our the NZXT Tempest
BIAHH102 3 years ago
NZXT hands down. i wish i had known about that case b4 i bought this one. dust filters ftw.
sk8rhippie 3 years ago
but there is a fan on the side does that get in the way
BIAHH102 3 years ago
on the nzxt not that much. but on the antec 900 that grill for the side fan does block a good deal of stuff. it isn't as easy to see through as you'd expect.
sk8rhippie 3 years ago
me too i cant decide
maxisadetanator 3 years ago
always back to that sticky grip thing ROFL
5h40573r 3 years ago
What GPU you putting in this? A friend has one with 9800GTX and he say's it only just fits. Just wanting to know, as I'm getting this case + HD 4850 and it's a fraction bigger than 9800GTX (hope it fits! :p).
killgroup 3 years ago
i have a 4870 and it fits fine as long as you don't put the harddrive on the same level as the gpu [your hdd should be at the bottom of the case anyway]
so your 4850 will fit easy.
sk8rhippie 3 years ago
I am curious would you mind making a video of the sound level of the fans?
I know there are issues @ low but medium-high I am curious what it sounds like.
Thanks.
Twisted86 3 years ago
I've been thinking about it but i've run into these problems:
1. my 4870 is louder than my antec 900 fans and it would cause the sound to be mis-informative.
2. there is no way i can set a standard that you can base the sound off of. without a reference you could just turn your speakers all the way up and say my fans are hella loud.
sk8rhippie 3 years ago
I see what model of 4870 512mb-1Gb version...stock or after market cooler and at what % is it louder?
I own both HIS 4870 512mb and a Sapphire 1GB with stock so it would give me a better idea of the noise.
I am not a freak over noise but I have issues with a turbo engine while I am trying to sleep ^-^
Twisted86 3 years ago
i got myself an asus 512mb. the difference is that the case fans are low pitched and the 4870's blower is high pitched.
sk8rhippie 3 years ago
i have a gtx280 inside this case..ya it fits!!
kiansin 3 years ago
thanks for the info kiansin, i was wondering if it would fit, that means my 285 will fit :D
CrossfireX2366 3 years ago
hahahas..sure!!
kiansin 3 years ago
Thanks dude.
lizardmannnn 3 years ago
sweet dude im def. getting this case, im going to go with gamer red though....
james022222 3 years ago
ahaha i've yet to swap out the fans. costs a good $40 to do that xP
sk8rhippie 3 years ago
ya lol
james022222 3 years ago
Nice review man
I just ordered my new PC with an Antec 900.
The following Specs -
Intel Core 2 Duo E8500 3.16Ghz
OCZ600W Active PFC GameXStream
OCZ Fatal1ty 2x1024MB 1066Mhz DDR2
XFX Fatal1ty XFX 8600GT 1GB
Asus P5Q PRO, iP45, S 775
Arctic Cooling Freezer 7 Pro
Tell me what you think, very good review by the way
M4kaveliTheDon 3 years ago
oh you stepped up to 1066mhz ram. you lil endeavor you xD
a 1GB GPU with only 2GBs of ram? foreal?! you better be running XP yo aha. vista's gonna eat that 1GB UP.
sk8rhippie 3 years ago
aha, yea im running XP. Getting the shit tomorowow and tuesday. Apart from that, what you think?
M4kaveliTheDon 3 years ago
what are you going to be doing with this comp? from the looks of it i think you should get 1GB more RAM.
and yer GPU isn't that good...so i'm guessing you're not going to be gaming all that hard...
sk8rhippie 3 years ago
Gaming.. not on any power houses like Cyrsis though.
M4kaveliTheDon 3 years ago
what res monitor? or atleast what res you planning on running games?
cuz i'm runnin 1680x1050 and that gpu of yers wont run much at that res aha
sk8rhippie 3 years ago
I play a game called Combat Arms thats about to be released for Europe. Its low spec and I play at 1024×768.
Would it make any diffrence if I added another of the same GPU?
M4kaveliTheDon 3 years ago
oh you play CA. ahaha i played that game for a week. it was way too easy. i had like 4KD after playing for only like 3 days ~.~
but yeah yer GPU will run CA great. and SLI-ing won't do anything. only certain games/apps support SLI. and since your motherboard has an IP45 chipset you won't be able to SLI at all.
sk8rhippie 3 years ago
I decided to change the RAM I ordered. Now I've ordered
OCZ 4GB Fatal1ty Edition 1066Mhz
M4kaveliTheDon 3 years ago
I just got this case off of newegg for $60 + free shipping....gotta love black friday. :D
My5teri 3 years ago
alright thx for the help i just got my case and motherboard. installed beautifully and waiting for my psu to power up the fans =)
aznkid648 3 years ago
Good review, terrible music.
riffz0r 3 years ago
ahaha. i was thinking about playing linkin park but i was too lazy to change the song. and everybody likes linkin park so i know you woulda liked that xD
sk8rhippie 3 years ago
I actually do like Linkin Park, minus the new CD. Saw them in Seattle in 2003 and San Jose in 2005. The music you kids listen to is terriblex100. D:
riffz0r 3 years ago
aha don't worry. anything you like i probably like too. i like almost everything i listen too...ends up being both a good and bad thing xD
sk8rhippie 3 years ago
Hey.. how do you put your motherboard in?? looks like theres only like 6 holes for screws.. in an awkward spot..
aznkid648 3 years ago
actually there are 8 holes for screws. it depends which 6 you use. one set of 6 are used for micro atx and another variation of 6 are used for standard atx.
you can't really tell with my low-quality camera...try watching 3dgameman's review and you'll see what i'm talking about.
sk8rhippie 3 years ago
I like this review. I don't think any other review of this case showed the other side of the case where you can do cable management. I wasn't sure if they already provided holes or not for it. Nj
kungpow108 3 years ago 2
yay ty ^.^
sk8rhippie 3 years ago
yeah, but gamer red wins :P
venom55520 3 years ago
Would you say this case is better than the Thermaltake Armor +MX ?
billy talent cool :P
afrojavi 3 years ago
do the fans come with break away molex connectors? so i can have two fans on one molex from my psu?
derderfan56 3 years ago
oh how do i explain this...it's not a break away molex connector. the molex on the fan is double-sided and allows you to connect more and more molex to a single molex connected to your PSU. i know it might be hard to understand without a picture...i might have to get you one.
all you need to know is that i have my 220mm and both front 120mms connected to the same PSU molex connector.
sk8rhippie 3 years ago
yes!
thats exactly what i needed to know!!
thanks so much now im definitely getting this case, is airflow good?
derderfan56 3 years ago