cat 365 c lme big cat with npk rock hammer in quarry

[doggystarful]

It's no titanium you tit,it's two different shades cos half of it is covered in grease !

[doggystarful]

you gotta take you time with the pecker or youll snap the point for fucks sake

[doggystarful]

i work for cab plant in england

[mylesmbehan]

Cat excavators would be better with a krupps hammer

[paulme33]

for replacement points call finning uk 

[lauener08]

breaker on a big hoe! awesome

[tumzoli]

the operator is making a common mistake thinking the hammer chisel is like a bucket that he can move the rocks around with, Thats one way of fucking the hammers bush!

[jeremyrobertson81]

nice pecker!

[mrshzzit1]

Looks like a very very borring job, if you just sit there doing that all day.

[virus56777]

running perfect

[inyourfacedouchebag]

thts a titanimam bit in that hammer the point is two diffrent shades

[MrRoncad]

used to do this what a shit job

[MrRoncad]

used to do this what a shit job

[doggystarful]

@MrRoncad you gotta take the rough with the smooth !

[canubelieve]

That looks like the most boring damn job in the world.

[JOKERDIESELS]

6,000 or 8,000 lbs. hammer ?

[shepdogshepdog]

ya paid far too much for hammer

[VollerSack]

Dis thing wurks liek meh penisch kk

[fernando93540]

excelete!!!

[MrJamessproule]

Really 130 grand dose seem a bit steep i have an NPK buster on my digger, wish i had one of those cat digger instead of my beat to shit Daewoo!

[23692369100]

explosives exlposives anfo anfo!!!!!!!!

[wahash22]

the faster u rev the hammer the much less work u'll get out of it, and anyway, thats very quick for that size hammer, i seen a 4.5t kobelco hammer on a pc 400 , its supose to be a good hammer, but it doesnt rev any faster than this one

[anewbeggining21]

Hmm now I have seen Hitachi 450's running Allied hammers and they have 2 speeds. They are a bit smaller then this hammer but still huge and they fuck way faster then this pig. 130 000 for a hammer? Seems a bit high, think that dude has been sniffing to many diesel fumes.

[hotsheet01]

One speed and it is slow.

[virus56777]

dry

[wahash22]

wat brand hammer is this?

[allistairc123]

npk

[doggystarful]

@allistairc123 is that 365 in england now ?

[clinttalk2525]

Shoot it!

[josderedneck22]

this is for all u guys how think u can turn up the speed off a breaker. tats not possible. the heavyer the hammer gets the slower the freqencie off the beats are. the little hammers for mini diggers have a high freqencie. they sound like a vibrator. trrrrrrrr. but big hamers go like the 1 in the vid. the only way to make them go faster is giving them more oil per minute whit the digger but than u can damaged the hamer very easy.

[alvie2]

I think this is what dynamite is good for..

[allistairc123]

no, houses nearby

[blueovalmk2]

that breaker is goin right there at all,should be more rapid my guess oil flow has to be turned up!!

[allistairc123]

yeah, it sounds that way

[gavin945]

@allistairc123 no npk are slow hitting, low power hammers, that is why you can hammer longer that 15 seconds without blowing the internal seals.

cat hammers hit fast with alot of power, if you lay on the pedal of a cat hammer you will blow the seals out of it and mushroom the bit.

[gavin945]

@allistairc123 no npk are slow hitting, low power hammers, that is why you can hammer longer that 15 seconds without blowing the internal seals.

cat hammers hit fast with alot of power, if you lay on the pedal of a cat hammer you will blow the seals out of it and mushroom the bit.

[stugbroon16]

i agree mate it should be more beats per minute lol

[ironbear79]

actually that hammer has two speeds los bpm more power in every beat

[Ganik82]

blue rocks Bassalt hard stone

[Tiiggii]

Im not quite sure, i´ve heard that info from my college civil engineer, where im working as Lawyer.

if you could, check all those crags, cliffs and huge stone rocks, down on the south of Bosnia, almost near adriatic cost.

And what do you think about that?

If you have any more videos on crags/rocks with dozers on tasks, please send them.

Thakns

[Tiiggii]

What kind of rock is that? Granit?

And how deep it is??

[allistairc123]

not sure, think its just what we call blue rock, hard as hell, prob goes all way to australia!!

[Tiiggii]

Cmon How the hell deep is that.

Maybe you have should consult those geologist to make an investigation how deep it goes.

You see that Libherrs hammer with 10 tons?

That could help you there.

Also, ive heard that Libher is building bulldozer with no other mach- somthing like 300 tons.

What do you think on that?

I really like to see those rocks gets busted, especially with bulldozers.

[allistairc123]

i dont know, they are not trying to get to bottom of it, im sure it could be 1000's feet deep. they just need more material out.

do you have more information on 300t liebherr? very interesting

[malluskman]

wankers

The Quarry in mallusk is a shite hole and so is the dump specially when the dump has employed taigs.Steven Jones fucking dead man

[Mitroglou]

cat power! fuck volvo

[johanj81]

difference between a owning a Volvo and owning a Cat is that if you own the Cat, you also need to own a welder.

Believe me, have been operating both for about 4 years before i became 1. engineer on a cargo ship

[dimikaterpilar]

caterpillar 365 for ever .from greece!!!!

[Cat365C]

Awesome video! I love th3 365's

[sideboltbilly]

I would think that it is running with the correct oil flow and pressure settings. You can change the speed of the hammer so it runs at a different frequency depending on what you are breaking,concreate or hard rock. You still run with the same oil flow setting on the machine. All in it makes the hammer more efficient on large volume jobs. And it saves on wear and tear on your gear.

[tanocontracting]

that hammer needs to get turned up i was running a 365 with a hammer it knocked alot faster than this

[festivephone]

lol hes actually alright, just funny to spread a bit of shit thru youtube lol

[festivephone]

Blairs digger, The man makes leslie wright look like mother teressa.

[allistairc123]

ha ha , why do you say that?

i know leslie wright gets that name!

where ya from?

[festivephone]

lets just say i either worked or am working for him and even drove that machine. Good to see Iraqi dave who's in this made his escape.

[allistairc123]

ha!, small world! blair has some stuff all the same!

davy needs a kick in the plums leaving a good job like that ha ha

[festivephone]

From what i hear itll be some stuff to no stuff soon enough. All those machines where bought with the guarentee of 2 years work on the newry roadworks which fell through and now 80% of his business depends on Hightown tip plus hes the same percentage of his employees now hate him for his recent cost cutting.

[allistairc123]

no idea myself. dont blame him for cost cutting tough, what would they prefer, him go bankrupt and have no job?

i would say that is a yarn , cause ihe has bought a lot after the job fell thru, but i honestly dont know.

[festivephone]

The day hes goes bankrupt will be amongst one of the happiest days of my life. The problem is he used the economic downturn as an excuse to be a wanker. He cant even be loyal to the mother of his kids never mind his employees.

[allistairc123]

oooo, i bet he felt that one lol. do ya still work 4 him then lol?

[festivephone]

Cant say if i work for him or not because his attidude is "if you dont work for me ill make sure u work for noone". Id gurantee you that his longest serving, best and most loyal employees get paid less than some new starts. Ive caught him out at it more than once in the past.

[allistairc123]

ha ha, u really have it in for him! what does he think of sammy leaving?

[festivephone]

Im sure he thinks sammys daft for telling him hes leaving and not taking the volantery redundancy that was on offer recently. sammy must be four years with him now . He always used to say no mans expendable. He wouldnt give a fuck who left now cos he can easily replace anyone with the economic downturn. I remember he said he was going to fire sammy cos of his bros claim but maybe that was just in the heat of the moment

[festivephone]

ha fuckin ha most of his machines got fucked out of hightown last week and now hes only 2 machines there! Everyones talkin about the mess he left at ray grahams old yard. Fat gareth undermined the pallisade fence and it collaped into the site and managed to fuck the shears as well. Pay peanuts blah blah etc.

[88madlaker]

you are all fucked ... i break rock in ottawa ontario . some of the hardest rock around he's doing nothing wrong except i wouldnt hammer with the stick cylender bottomed out it hard on stuff ... quiksilerjd.. i've herd of fulty chizels but 4 tips ..you cant tell me thats not prying ..where i break rock the chizel is fucked in a day, get them sharpend about 4 times

[quiksilverjd]

1:40 this is absolute abuse on the attachment. hope you dont get fired

[allistairc123]

you are quite mis informed. this is common practise.

crowding on the chisel when in a hole would be abuse, but trailing looser rock is not.

[quiksilverjd]

thats what support equipment is for. (dozer in this case should clear loose material into a pile for excavation. ..) Prying objects, or rocks is abuse. And if you worked for me I'd probably punch you in the face if I saw you moving shit with that hammer.

[allistairc123]

ha ha, if you punched me in the face, you would never be seen again. you would just dissappear into thin air.

there was no prying going on, the chisel was being trailed.

[rodmann003]

that is too slow.. the oil tempreture is too hot.. or the hammer is scarce of gas.

[allistairc123]

yeah, i thought that myself. maybe the flow is not set up right?

[elwaa23]

dont think it is that slow for that size of the breaker, mite sound slow but the impact on the rock is what really counts, if it was low on gas the hose's wud be jumping alot.

[BIGDOZER81]

this is a cool video man,the cat excavator is the best and better thank man

[quiksilverjd]

So, last time I checked youre not suppose to use it to move shit. Just 90 Degrees Up and down. Pound for 30 - 40 secs no more. That shit is gonna break. I've broken 4 tips on a hammer and that was using it correctly!

[dozerdriver1962]

ran a e210 volvo with a hammer it had faster impact cycls is that because its smaller? it worked awsome btw:)

[GooperUK]

Cat 245's were the bollocks in the early eighties for mass excavation on the M25 through Radlett and Colney St.

[rocker53zero]

this quarry should be shut down. I've lived my whole life near it and the dust from it never stops. theidiots who run it have just managed to crush a worker and shovel him into a pile of rubbish without noticing. When we complained about the dust from the crusher, the Health and safety people came back with a lie that there was no dust and that the only discharge from the crusher was STEAM. Who is in whose pocket ?????

[allistairc123]

and where do you want your bricks and mortar to come from? your roads and pavement?

[suomola]

Needs accumulators to protect hydraulic circuit. Old technology circa 1985 design.

[cowbubbles]

volvo makes good adts cats not top in power with hoes i know we tested a 320 cat with a 220 komatsu . komatsu won easly cat sucks my ball

[dozerdriver1962]

that hammers hydrolic powerd dude i ues one on a 325 saves wear and tear, to a point, hard on components.......

[zaxis350]

Should have used an Hitachi. Way better rig than a Mitsubishi with Cat stickers.

[bfarmer7]

cat is way better

[cowbubbles]

komatsu ive tested my self

[coltonfelton]

Why you not blasting?

[allistairc123]

shallow breaking to meet tight finnish levels

[sideboltbilly]

I dont think you do buddy. And im sure everyone else thinks the same. I supose your going to tell me next that the mechanic is putting washing up liquid in the hammer,so it blows bubbles to let the driver know a hose is blown!!!! I bet your an office pest at work.

[jamsie2]

fuck you sideboltwilly ya cock i know what im talking about im not stupid!!!!

[sideboltbilly]

No jamsie2. Your thinking of the air powered hammers used by the likes of the D.O.E for road repairs. Air powered your arse!

[jamsie2]

thats a big compressor on the back of that digger to run that rock hammer!!!!!

i love big rock hammers!!!!!!!!!

[allistairc123]

it is powered by the diggers hydraulics pal.

[allistairc123]

what? didnt really understand that buddy

[Wootang333]

most film some of the shite i work with and put it on digger+hammer worth more than all are crap put together