MotionBoardshop.com "How to Choose Precision Trucks" Part 1

[MrImsuperfly]

He was talking about what bushings he has on his board not the ones they were showing

[wmalongboarding]

haha he siad it was a white jimz and it was black

[Predator2169]

what trucks would fit my landyachtz urban assult?

[WhyNotLongBoard]

PLEASE RESPOND!? do you guys happen to know if randal baseplates are compatible with monkae hagers? and if not what precision hangers are? thank you!

[MotionBoardshop]

@WhyNotLongBoard

Munkae Trucks are not Compatible with Randal Baseplates

[GoneGuitaring]

@byRhyz Ive got them too, they're so great. I'm assuming you switched to venom bushings like most would but Blood Orange (Caliber's) bushings are friggin amazing, so much rebound and great lean. Just keep them relatively soft.

[WhyNotLongBoard]

HEY MOTION! do you happen to know if any preciision baseplates work with randal hagers? haha

[fr0zdify]

all these trucks are really cool but damn they are more expensive then my deck....

[skatenj1211]

Thanks

[skatenj1211]

can you guys make a review on new preision trucks? a lot has came out and i would like to know more about some of them.

[MotionBoardshop]

@skatenj1211

New precision video in the works.

[xmuggyx]

@MotionBoardshop

Are Ronins going to be in the new precision video? been looking into those a lot. They seem to have a unique design that people are liking a lot.

[nhanly0345]

can the Munkae Trucks be drop through

[CAMisMissing]

anyone know the name of the black drop decks behind and slightly above spencer and trevor's heads? the one with the red and blue graphics.

[MotionBoardshop]

@CAMisMissing

Landyactz Switch 2009 Graphic.

[CAMisMissing]

@MotionBoardshop Ahh... that would explain my confusion.

[byRhyz]

Are Caliber 50's precision trucks? And are they any good?

[MotionBoardshop]

@byRhyz

Calibers are not precision trucks but are good trucks anyways.

[radicaldude881]

@byRhyz well calibers are not precision but they act like precisions. they are the number one leading cast trucks

[byRhyz]

@radicaldude881 Thanks

[GoneGuitaring]

@byRhyz Caliber are among the best cast trucks on the market. BUY THEM.

[byRhyz]

@GoneGuitaring Thanks bro... i pick a pair of 50's up a while ago... couldn't be happier

[JamesonLB]

I got a couple questions. 1. Whats more practical for a higher degree baseplate like 50 degree and a lower degree like 25. Whats the difference. 2. Why would you have a different bushing on the bottom then on the top.

[chillywillylaxer123]

how much do you think i can sell some pretty nice 2007 bear smokies for?

[superphil92]

The guy to the far right is just like me. He is asian and has a small lisp..

[duncanfreakfanboy]

MUSHROOM TOP HAIR!!!

[Timtimeified]

the guy in the middle looks so guilty

[011adolfo]

the guy with the metro tshirt is a weirdo

[thrashtastical]

how would munkaes be on a carbon matrix with nersh money hax?

[AVsDproductions]

So i built a board and its the first time i havent bought a complete board so im getting some paris 180's with it now do they come with all of the screws and bolts that i need to mount them

[nathanielkowal]

are gullwings rastas good for carving?

[awesome12345100]

switchblade + munkae 190mm + dropped tru + 77mm centrax. wheelbite???

[nineball87]

@awesome12345100 yes

[haseoice]

how do you fix the weird pivoting feeling on the smokies?

[cn969777]

Just ordered bear grizzlys today. Any facts? Are they great for sliding? Kinda hoping so

[Kermit9o9]

@cn969777 Ya they slide and bomb really really well.

[TriggaPimp]

@cn969777 i have em and they are generally great trucks

[nwinova]

Like really? Where do u fine 10mm munkae trucks at?

[Tubofluxar]

why is that dude in the video ?

[The50carter]

i have a gravity makai and i was looking at getting new trucks. i do little to no carving, medium cruising, slides mainly speed checks, and downhill at speeds of about 40mph. i was looking for a truck that will give good stability, what do u recomend. i have brand new venom DH barrel 87a bushings if that makes a difference. please reply. thanks!

[sapokkkjjj]

@The50carter what trucks do you have? oh, and get a new board first, i had a makai. it doesnt last long...

but id get either caliber 50 or bear grizzlys if youre putting them on that board

[The50carter]

@sapokkkjjj ya thanks for the response but my makai snapped so i bought a switchblade with bears! :)

[SonySkater2410]

@MountainTopBoards YEA DUDE THERE CALLED PRANDALS FUCK YEA XD

[andrewkrip]

Talking about precision trucks with 8 dervishes in the background.. Oxymoron

[skyking166]

get buzzed, by getting buzzed trucks! LOOL you guys (MBS) should give buzzed trucks a try :P

[MotionBoardshop]

@MountainTopBoards

yes, alot of people run what is called the "prandal" setup which is a paris hangar and a randal base plate. People like the engaging bushing seat of the paris hangars but also like the multiple angle options that come with Randal Baseplates.

[rangehero]

@MotionBoardshop I have Calibers and Randal's, i like to call them candles. *swaggers off*

[teamgarry2]

will surf-rodz fit on a 9two5



[wsmiteh]

@teamgarry2 chea, i have a budy with some

[typeZeroYT]

forgot to mention I'm 6'3 210, probably narrows the deck possibilities

[typeZeroYT]

on what deck were you doing the smokey freeriding? Ive got some smokies and have been looking for a deck that can DH and freeride.

Thank you

-j

[Mateoapex34]

can i use the bear smokies for freeriding??? the ony reason i dont want surf rodz is beacause of the 10 mm axle ...

[kevok2]

Learn to use a fucking tripod

[DoomGoon138]

The kid in the middle is socially akward haha

[jonescosmo]

@DoomGoon138 it was funny how the video cut out as soon as he started talking haha

[motule]

@DoomGoon138 the kid in the middle can ride like a motherfucker, he doesn't need social skills. he got first place in the germany IGSA race.

[lukasziman]

i have old smokies can you put jimz bushings on them?

[MotionBoardshop]

@lukasziman

They would fit perfectly, thats what they are intended for.

[lukasziman]

@MotionBoardshop even the old red version?

[MotionBoardshop]

@lukasziman

yup

[DHskatemedia]

@MotionBoardshop Are Munkaes Good for freeride?

[mattybrunken]

Hey can I put a munkae hangar on a bear 852 base plate?

[TheEdcleven]

can you put original s10's on an evo?

[sk8er37dus]

@TheEdcleven are you high? never put s10 on evo!!!

[SlickMullet]

@TheEdcleven lmao

[SadiMovies]

LOL 1:37 ... so gay

Love you guys at motion board shop tho :)

[branvann]

PLZ PLZ do a review on Aera's!!!!!!!!!!!!!!!!!!!

[MustNotWatch]

i skated regulars skateboards for years now and im just now getting a longboard, and i dont understand shit of what they are saying

[MATandBENgetLOADED]

which one on a killswitch ?????

[kinkiebeast]

what would happen if I put the 08 Bear smokies on my Demonseed?

[UaLongboarder17]

which of these would be the best for free riding

[jesus781023]

which angle is most carvy for the smokies? 20,30,35,40,45,55?

[ShorelineMBX]

@jesus781023 55

[mrPACarrier]

Hey, wich trucks carve the best beetween Paris 180, Randall 180 or Bear Grizzlys 180 with Venoms Supercarve 83a?

Also, what do you think of the new Bear Grizzlys Hybrid Trucks ?

[1Thunderhorse1]

guy in yhe middle trippin

[eastcoastlongbordr]

Hey guys i was looking to get some surf rodz trucks for going fast (over 40mph) i was stuck with which hanger and degree baseplate to get. I was thinking somewhere around 45 degree plates but i wanted to hear what you guys had to say. Id be putting the trucks on either a Ly drop speed or a earthwing bellyracer. Also should i get the 176 hanger or 200. Thanks guys im looking foward to what you all have to say.

[mitchhopson]

Are there specific truck for specific boards? Like i'm ordering a Dervish and i wanted to know what kind of quality of trucks i will be getting from the loaded website. And if i could just order a different kind of truck and slap it on my Dervish.

[pinulaman]

Hey, on you online store are the munkaes sold individually or in sets of two?

[ChuicyProductions]

@pinulaman  sets of 2

[cownage12345]

can u put barrels on smokies? how restrictive are smokies bushing seats? Ive never seen a pic of the bushing seat. how are radical talons and what truck would u say has the most traction

[MotionBoardshop]

@cownage12345

Barrels will fit in smokies just fine, smoky bushing seats are very restrictive, but that's the way they're meant to feel because they have two sphericals in the trucks which makes them extremely responsive even with minimal amounts of lean. I've personally ridden radikal talons for about a year and a half and they're super sweet trucks, practically polar opposites of the smokies, the bushing seat (or lack there of) on talons provides practically no restriction so they lean alot.

[TheStokeholm]

get Kahas!

[KeymerBoarder]

I want kahas or munkaes

[nando350dx]

don't worry guys i decided on surf rodz because i liked the angle that i got from my sabre trucks. they are mounted on a rayne isis and are being tweaked =)

[nickyy3525]

apex 37 or dervish:P??

[thenewguy11111]

@nickyy3525 Dervish! you will love your life soo much more!

[DaneshRustomjee4]

the face on nathan at 1:38 hahah 

[DaneshRustomjee4]

mmmm i want my bear smokeys!!! hahah.

How are the bear smokeys at carving??? or am i just stupid for asking hahah cause im really into bears and i reckon i could mangle up enough for some smokeys but i wanna know if they carve... and how are they for freeriding???

[LoadedChangesLives]

where is this shop i wanna go there cus there are no longboard stores on long island! and your bear smokeys are more expensive than a dervish deck :P

[steheleneboy]

I have the GFH BOARDS trucks and im wondering if I can use them as drop through trucks on my home made longboard?

[pooop592]

dudes i need help out of all your downhill trucks what would be the best i have an evo and i had a dirty crash and im trying to build the most stable deck coz i have the shakes now help me out

[SomeDANKshit]

the middle dude didnt say shit until 6:18 hahahahaha

[socaldownhill]

are u running 174 0r 190 smokies?

[WhereIsNumNum]

49 degree munkaes would be sexay

[wwwDANIILru]

i love the 2008 bear smokeys!

[AibhneB]

1:39 nate looks like a spoiled child at christmas

[theflyinchocolatemil]

how high are the bear smokies compared to the bear 1040s?

[MrPlanters360]

that guy in the retro shirt is so creepy

[tantou]

Where're the Plasmas? >:0 Also Maguns? Too expensive? :P

[clandestinepig]

what's your thoughts on kahalani?

[laxmanbren1029384756]

im more of a free rider but when i saw the surf rodz i thought they looked sick! but when i saw this video, it looks like u can free ride with precisions. im just wondering if there really is a huge difference with the precisions and whether its worth the extra money. also if i could use them for freeriding. thanks

[Dreskiff23]

@laxmanbren1029384756 Not worth it. For freeriding get randels wit 42 degree plates

[bookraper]

You guys should have taken it apart

[DJHstuidos]

are the 2009 bear smokies lower than the bear 1040s?

[nando350dx]

hahaa!! munkaes are wicked cool. =) though i would like different angles

[MotionBoardshop]

@nando350dx

Rejoice, rumor has it Munkae will be releasing a 49 degree plate soon!

[Endlessdonut97]

@MotionBoardshop YES!

[jakerumbaugh15]

@nando350dx i bent my axles freeriding on them :( there the best truck iv ever had

[pdubs926]

as i posted on another video i have a rayne demonseed and im looking for a precision truck and i want to know what trucks would fit droped through on a demonseed with engough clearence to take sharp corners with loose trucks

[MotionBoardshop]

@pdubs926

Your best bet would probably be Smokies. With a deck as low as the demonseed the extra height of smokies would be essential. 

[abqlongboarders]

Just a quick question would Surf Rodz be as stable as say Smokies or a Munkaes?

[MotionBoardshop]

@abqlongboarders In some cases, wider trucks, yes they are even more stable. They are wonderful and will change your riding forever! No BS!

[DrAMB320]

Have you guys heard of raptor precision trucks. They are made by genghis longboards and are pretty cheap. They are similar to munkaes but come in more colors and 50 bucks cheaper. Check them out and maybe start selling them.

[MotionBoardshop]

@DrAMB320

We don't deal with raptor for many reasons. Raptor's business ethics are extremely unimpressive and their history with Munkae trucks is dirty and dramatic. Munkae FTW!

[DrAMB320]

@MotionBoardshop Ya it looked like they might have stolen the munkae designs. I also read about that on silverfish

[MrLongboarder94]

@DrAMB320 those have been known to break alot

[LongboardSWE]

Heya, do u think a 42 degree baseplate will work with a Sabre 190mm hanger? with 93a sabre bushings back truck and 93a boardside and 88a truckside in front?

Happy for response Thanks!

[bakonlicious]

Are Paris trucks prescion trucks?

[bmxbmx94]

@bakonlicious no

[MotionBoardshop]

@bakonlicious

no.

[OtherPlanetSkate]

@taggerung217

I haven't ridden them, But I've talked to some of the guys at SZ's and talked to some people who really like them. You're the first to mention anything about not being able to turn.

Do you know what bushings where in the SZ's you rode?

[OtherPlanetSkate]

@taggerung217

What's weird about SZ's? D:

[420chance666]

how do you take the spherical out mine are a lil rusted and cant get the out how do you suggest i get them out??

[11dosentmatter]

why should i run 10mm axels with biger wheels like nershes

[brutalback]

@11dosentmatter You don't have to, but it's a little smarter. The bigger wheel weighs more. More weight = more Inertia = More force. If you hit it against a curb, that's a lot more force, and chances are a 8MM axle will just bend under the force. 10 mil well have less of a chance of bending, but they aren't invincible. I still personally prefer 8MM trucks, and still prefer riding regular trucks than precisions under all conditions. My friend's Radikal Talons just doesn't feel right freeriding.

[BeamerBean11]

Cant wait for part 3 I wanna lear more about Surfrods they look crazy

[TheAmazingPinoy]

Im kinda a nooby at this longboard. I'm going to buy one soon and I need to learn how and what to put together. Such as the barrings in the wheel, how to put stuff and what to put on.

[MotionBoardshop]

Thanks for helping respond taggerung217, actually we do sell plasma precisions and you'll be seeing a video of them soon since they were nice enough to hook us up with a demo pair that we can try firsthand. We're digging the nimbus trucks too. And one of our teamriders is sponsored by surfrodz so you'll probably be seeing those soon as well. Look for part 3 in the future but these were the ones that we've had the most experience with and we've had awesome results with all of them.

[AznMobsta485]

buy munkaes! i have them and they are the best trucks ever

[gabetar1]

haha get those randalls out of there. They are precision.

[gleaken17]

whats a sphirical?

[bradleyrxz]

Nice video, but how bout plasmas, surf-rodz and kahalanis?

[italianmobsta74]

You guys going to include plasmas or kahalanis ever? Just interested in those 2 trucks versus the Munkaes.

[glitchable]

yeah sweaty guy in the middle!! YEAH!!

[bradleyrxz]

why didn't you guys include plasmas too?

[alexthedrumma1]

YESSS iv been waiting for you guyz to do this vid for everrr

[SE4GY7]

Finally thank you very much fellas i needed this!

[SE4GY7]

SWEET!