so the 350 will bolt onto the 4.3 trans? have 91 4dr s-10 blazer with the 4.3 auto, will the sbc fit under the hood without a body lift? will the motor mounts have to fabed or can i buy them through summit?
I just got a hold of a 1991 S10 jimmy . I want to put in a V8. Would like to know if you need a conversion kit and wandered about the tranny do you need to up grade? If so any info would help!!!
You will need motor mounts, headers,oil pan, and depending on what engine you have now you will need a radiator and a transmission. I used a radiator from a 4.3 with dual electric fans and a 5 speed tranny from a 4.3 liter s-10. Summit Racing sells the conversion kit.
@mazayamni I am putting a 350 chevy in my 88 s10 and so far all i have needed is motor mounts and cooling fans that go outside of radiator and a radiator
if only gm put v8 350 or at least 305 as a option like jeep did
wtl1964 2 months ago
so the 350 will bolt onto the 4.3 trans? have 91 4dr s-10 blazer with the 4.3 auto, will the sbc fit under the hood without a body lift? will the motor mounts have to fabed or can i buy them through summit?
chroniclynumb 1 year ago
@chroniclynumb yes the 350 will fit right onto the 4.3 tranny.
warrenwolverton 1 year ago
my dad had a 85 s10 with a 350 small block 5speed
and he had a 6 inch lift with a 3 inch bbody lift all fabtech with 36 inch tires pretty badass
tristianck 1 year ago
I wonder if I could get a 454 ci. V8 in my '87 S-10 Blazer 4x4... Hmmm...
tcc187620 1 year ago
you should move somewhere that the dirt mixes with the water and makes real mud
grahamgrassfoot 2 years ago
nice ride, you done a lot of work doing all that swapping, would of been easier to do a frame off transfer of cabs if you didnt do that ;)
justinlf16 2 years ago
i have a 4.3 tbi with 5spd so im lookin good for a v8 i think
boobsmaster 2 years ago
he said 5 speed tranny ....haha
DeAnDiStRuCtAbLe 2 years ago
I just got a hold of a 1991 S10 jimmy . I want to put in a V8. Would like to know if you need a conversion kit and wandered about the tranny do you need to up grade? If so any info would help!!!
Awesome Rig!!
mazayamni 2 years ago
Thanks for the comment.
You will need motor mounts, headers,oil pan, and depending on what engine you have now you will need a radiator and a transmission. I used a radiator from a 4.3 with dual electric fans and a 5 speed tranny from a 4.3 liter s-10. Summit Racing sells the conversion kit.
ardenlow 2 years ago
@ardenlow thats sweeeeeet
darren107 2 years ago
@mazayamni I am putting a 350 chevy in my 88 s10 and so far all i have needed is motor mounts and cooling fans that go outside of radiator and a radiator
JSN1995 1 year ago
what size lift?
stangatack 2 years ago
5 inch trailmaster and 3 inch body lift
ardenlow 2 years ago
mine will be a inch higher than yours when i make a custom 6 inch suspension lift, already has a 3 inch body and 31s and a 454
hispeed1985 2 years ago
nice rig
metlmulisha 2 years ago
whats it got in it 350?
chevyrules79 2 years ago
yes it was a 350
ardenlow 2 years ago