M203 Airsoft Granade Launcher - Loading and Trouble-Shooting - PART TWO

[quinnthin12345]

did the actual gun break

[808Kameleon]

@quinnthin12345 No. Just the aluminum valve for the grenade. Made in China. Go figure! The grenade launcher is still OK.

[benikjv]

* grenade*

[ZaCkOX900]

Hey how safe is propane like this? I just added a MadBull grenade launcher and grenade 204 rounds.

[808Kameleon]

@ZaCkOX900 Green gas is propane, so using straight propane is safe. But make sure there is grease on the bearings and plunger and you should be OK. And one safe way (use eye protection ALWAYS when filling gas into a granade!) is to fill the granade with one QUICK zap of gas to make sure the valve is closed and there is no leaks. THEN fill with pellets. After all pellets are filled, add gas to full preasure (about four to five seconds).

One of my MadBull granade uses CO2 !

[ZaCkOX900]

@808Kameleon Thanks, kind of knew that already though. I meant like safe to carry. I tried to buy some at the store and they thought I was crazy for buying propane. I just screw on the adapter right? Then load with the propane forced downward onto the grenade. What about people smoking near me?

[808Kameleon]

@ZaCkOX900 YES! Just simply screw on the adaptor, and you can also add a few drops of silicone oil for much reliable usage, and more cloud of "smoke" when discharged. And keep the smokers far AWAY when you gas up your granades!

[skatedoofwitabass]

hey does the valve release on back push down easily or fairly easy? im making a mortar and i need to know thanks

[808Kameleon]

@skatedoofwitabass YES! I seen young teens make their own motar! And someone made a bazooka! It IS possible! Have fun with your build!

[AirsoftersNI46]

@808Kameleon where do u order from and is it metal?

[808Kameleon]

@AirsoftersNI46 Some of my granades, I actually bought it from good 'ol ebay! Another, I got it from a Hong Kong shop like eHobby Asia, or UNCompany. It is ALL alunimum metal! 

[techdeckdude245]

do you need the barings

[808Kameleon]

@techdeckdude245 Yes. The button valve on the bottom will not lock without the bearing.

[SIDETRACKEDpenguin]

i love your videos always good fun and informational:D

[HGpyroweapons]

lol wahts the range

[808Kameleon]

@HGpyroweapons Effective to 40 feet, or around 12 meters... but shotgun effect!

;]

[FingerSk8erboy]

@808Kameleon using vasaline for the ball bearings does it hurt it?

[808Kameleon]

@FingerSk8erboy No. It is safe! You can also use silicone grease.

[FingerSk8erboy]

@808Kameleon thanks...nice video

[TheMDOGG1997]

spelled grenade launcher wrong

[808Kameleon]

@TheMDOGG1997 OOPS!



[freeskierjay1233]

if you tip it upside down do all the bbs fall out?

[808Kameleon]

@freeskierjay1233 Only the excess ones after finishing loading each hole with pellets, like about 3 or 4 per hole. The rest are held in by a large o-ting that surrounds the granade.

[onecrazyRikster]

Do you need a launcher to fire the grenades?

[808Kameleon]

@onecrazyRikster You can hand fire it. But where is the fun in doing that?

Also, you can get those trip wire used to fire off real-steal shotgun shells. I seen some guys use that.

[n1njaw0lf]

where did you buy the gass?

cause i only find adapters and CO2 paterns :/

[808Kameleon]

@n1njaw0lf Green gas, red gas, and 134A gas should be available at any local airsoft shop or some hobby shops. If none is available in your hometown in Belgium, you could Google surrounding areas, and see if they will ship green gas or any to you. It is compressed explosive gas (propane), so ground shipping will be your only option.

OR! You could see if they sell propane gas at any store, and see if any on-line e-shops that sells airsoft acessories carries the propane adapter for airsoft.

[jjeokam]

@808Kameleon How was Nanakuli 2day? I couldnt get a ride!!! im so sad :(((((

[808Kameleon]

@jjeokam I didn't go. I had the Honolulu Marathon set-up. And, like you, I had no ride down.

[jjeokam]

@808Kameleon P.S. Where in the world did u find propane??? EVERYWHERE in Haleiwa is out of it!!!!

[808Kameleon]

@jjeokam WalMart! Less than $4.00...

[seanmcmurphy1]

thumbs up if u didnt watch part 1

[snowdawg95]

the problem you come across at 2:16 keeps happening after every time i shoot my grenades. It happens to all 6 of mine!! is it just because they are not "broken in" yet?

[808Kameleon]

@snowdawg95 ALL of them? whoah....  did you try either Vaseline or silicone grease?

[snowdawg95]

@808Kameleon i don't have silicone oil but i do have vaseline where should i apply it exactly??

[808Kameleon]

@snowdawg95 Around the rim of the black rlease button that comes in contact with the four berrings. Also you can grease the bearings too. Do some test shots empty, and see if the button can be depressed and hear the "click". If not..... it is a bad brand. NOT MadBull, I trust?

[snowdawg95]

@808Kameleon NOT madbull... but pro arms 96 rds. all 6 going in my ICS GLM i tried lubing that part but the piston still stays stuck in the bottom half of the grenade after every shot i take. I have to open up the grenade and but the piston back to the top part. idk why it doesnt stay in that spot.... is there wny other way to keep it up there??

[snowdawg95]

@808Kameleon NOT Madbull but pro arms 96 rnd grenades 6 of them in my ICL GLM i lubbed up the spot but the piston still gets stuck to the bottom part of the grenades is there any way i can get them to stay stuck to the top part or is it that the spring is messed up or something???

[808Kameleon]

@snowdawg95 I doupt the spring could be messing up on all six granades. Does the piston unlock when you turn it slightly to open?

[snowdawg95]

@808Kameleon the piston stays stuck at the bottom half even when its open then i push the button and it comes loose but it doesnt do the same when the grenade is closed.

[808Kameleon]

@snowdawg95 Check any airsoft forums. I'll do another video in the near future. But not anytime real soon. I'll also mention about your problem with some techs that I know. I'll inform you as soon as I get a logical answer.

[snowdawg95]

@808Kameleon Thank you. you've been more helpful than most customer service representatives!! hahaha

[808Kameleon]

@snowdawg95 =D That is what I am here for! If I do not know the answer, I do not fake it.

[snowdawg95]

@808Kameleon Where should i apply the vaseline exactly??

[FingerSk8erboy]

@snowdawg95 put some one your finger and then wipe the vaseline around where the ball bears are then put the balls bearings back in and wipe some vaseline off and they should stay

[looneyirish007]

vaseline, now why the fuck didnt i think of that, thanks mate, i was just gonna throw it at people instead

[Riskitforabiscuit97]

Im english and like bikexwscootxski im looking for a sniper not gas for under£110

[bikeXscootXski]

I want to get a good automatic electric airsoft gun and i dont want to spend over 200$ and i was wondering if you knew of a good site for me to go on that i might have not seen yet?

[808Kameleon]

@bikeXscootXski LESS than $200.00. You know that you get what you pay for. Most Chinese-made riffles are less than $200.00. You could try Jing-Gong. At least you can interchange parts. I will look around and give what I deem good for less than $200.00 and give you the link in your inbox since YouTube doesn't allow links in public comments.

[bikeXscootXski]

@808Kameleon Ok thanks a bunch

[MVPxKOBE24]

@bikeXscootXski hitguns.com is sweet bro. cheap prices for JG m4 S-System

[cinexjr808]

You got.a madbull grenade shell? Awesome jus like me lol

[808Kameleon]

@cinexjr808 Next game at Nanakuli and next game at the MOUT !

;]