Well you should already know that yes ... I crashed my heli lol , But im really having serious problems finding the peace that i need and yes ive tried Xheli . One part i really need is the center hub and i dont understand why its taking so long for them to come back in stock could you help me please ?
@GaryX1001 Well i have a few parts on back order right now and its been a month since i placed the order . They told me that E-flight or I think its E-sky hasnt got any new shipments yet so im stuck waiting i guess. Ebay no no I guess ill just need to wait .
my cp came in last month . during the first 3 seconds of lift off. i crash it .i waiting for parts...please tell me I'm getting simulator. will it help....and what steps did you take to feel comfortable about flying this...how did you improve your skills
@Gdoginya1 you have to learn step by step. you cannot lift the heli and fly around, that doesnt work ;) my first attempts were just sliding on the ground to get used to the controls and to feel when the heli wants to leave the ground. a good sim will definately help, i learned with heli-x and phoenix. when you can hover stable and being sure you have the control you can go to the next step. good luck!
Great flyin there. interested in how you flew in rate mode, I never change from heading hold, do you have to control tail more or will weather vane in Direction of flight? I can do fast forward but only by keeping nose away from me. Still can't get hang of nose in. how different is it to Head hold?
@chrisf844 i cannot remember, too long ago now :) i used the gy-401 and setup was done in rate mode, so the tail did stay quite ok. i never flew again in rate mode, i have to control the tail in the curves myself ;)
@22NiggaPlease well, i bought this heli 2 years ago @ 250€, today it is cheaper and also a upgraded version available - Belt cpx. i would try to look @ XHeli or nitroplanes or your local hobby shop near you.
@GaryX1001 I noticed a clip of you on ebay with the same heli being sold and i dont know if the person was just using your clip just to show what it could do or if it ws really you ?
@GaryX1001 Ok thanks, Do you think the cpx is better than the cp v2 ? and what do you think is better the cpx or the T-rex ? And ive looked online at Xheli.com and they are sold out do you have any other options ? thank you .
@22NiggaPlease i have not tested the cpx, but they did some improvements compared to the v2. heliguy has it in stock. the trex is much better! problem is, if you start the hobby atm and realise its not for you then the belt cpx is the better choice because the trex costs twice the price and comes without transmitter! spare parts are also cheaper from esky. if you can fly the belt once you can get the trex and then you know you CAN fly it ;)
@GaryX1001 I understand that the heli does not come fully ready to fly is there things i need to adjust the heli with that the heli might not come with ? because i will order it the same time i order the heli .
@22NiggaPlease most important tools are: swashplate levelling tool & pitch gauge. i recommend a training gear for first hops. before trying to hover (no, not flying!) it is highly recommended to learn controlling a CP heli on the computer! phoenix or heli-x or another simulation. this way you safe alot of money, because you WILL crash :)
come join the myrcguide forum when you have questions with setup and stuff!
@Ggiven2001 the package says: 14+, these RC helis are no toys, they can hurt you very bad! learn on simulator at first and when you are ready get your dad with you outside for a first real try!
Gary, I got this heli with stock gyro, radio & receiver. I had changed the receiver into Orange RX to suit my Futaba radio. Can the stock gyro goes with my present radio & receiver? What blade are you flying with in your video?
@stingrayfred1 well, i tried the esky gyro with spektrum RX and it gave the tail random glitches! it worked for a min or two and then out of nowhere the tail turned between 90-180° for no reason by itself! the blades on the belt cp v2 i ALWAYS flew were the esky carbon blades. they were durable and it always flew good!
@MrPelli777 you can begin with it, yes, but do not expect to be able to fly around! first step is hovering, hovering & hovering! if you can do that safe you can go one step further (side hovering, nose in hovering.. and so on).. always step by step.
@MrLuke5050 i would be extremely carfully if you have no experience with RC helicopters! these things can hurt really bad if they hit, so only use when your dad is around with you!
@drahdyfa well, that flight was 10 months ago, dont know what i used there, cant remember :)
i was using a DX7 for sure with esky carbon main blades and tower pro servos. i think i also had the gy-401 already installed, but cannot say 100%. check my newer videos to see the flying difference to this first wild speed flight ;)
My problem with my belt cp is the flight time. I used to get 10 mins flight, but know I only get 6-7 mins. I check many times for binding, but can't find one. I bought a new battery, still give me the same result.
Lol hey ya i did the same thing i was pissed off and told myself that i dont care if i smashed this thing in the ground....let me just say i did the best flying out of all the fying i have done lolol nice flying by the way
Hey sorry to bother you again but now im hearing that E-sky is closed ?
22NiggaPlease 3 weeks ago
@22NiggaPlease well, the official esky website is up and running and i didnt read anything about that. en.esky-sz.cn
GaryX1001 2 weeks ago
@GaryX1001 just gonna stop flying e-sky helis because they dont seem to be in stock with anything i need
22NiggaPlease 2 weeks ago
Well you should already know that yes ... I crashed my heli lol , But im really having serious problems finding the peace that i need and yes ive tried Xheli . One part i really need is the center hub and i dont understand why its taking so long for them to come back in stock could you help me please ?
22NiggaPlease 3 weeks ago
@22NiggaPlease you need the part for the belt cpx, right? that center hub is out of stock here in germany also, you have to wait. sry. maybe ebay!?
GaryX1001 3 weeks ago
@GaryX1001 Well i have a few parts on back order right now and its been a month since i placed the order . They told me that E-flight or I think its E-sky hasnt got any new shipments yet so im stuck waiting i guess. Ebay no no I guess ill just need to wait .
22NiggaPlease 3 weeks ago
my cp came in last month . during the first 3 seconds of lift off. i crash it .i waiting for parts...please tell me I'm getting simulator. will it help....and what steps did you take to feel comfortable about flying this...how did you improve your skills
Gdoginya1 1 month ago
@Gdoginya1 you have to learn step by step. you cannot lift the heli and fly around, that doesnt work ;) my first attempts were just sliding on the ground to get used to the controls and to feel when the heli wants to leave the ground. a good sim will definately help, i learned with heli-x and phoenix. when you can hover stable and being sure you have the control you can go to the next step. good luck!
GaryX1001 4 weeks ago
Good flying mate!
SpankTheYanksAgain 1 month ago
Great flyin there. interested in how you flew in rate mode, I never change from heading hold, do you have to control tail more or will weather vane in Direction of flight? I can do fast forward but only by keeping nose away from me. Still can't get hang of nose in. how different is it to Head hold?
chrisf844 1 month ago
@chrisf844 i cannot remember, too long ago now :) i used the gy-401 and setup was done in rate mode, so the tail did stay quite ok. i never flew again in rate mode, i have to control the tail in the curves myself ;)
GaryX1001 1 month ago
wow i ordered it yesterday and the cpx came today !!
22NiggaPlease 1 month ago
@22NiggaPlease i ordered my cpx today.......does it fly fast like this one and ow do u like it so far
Gdoginya1 1 month ago
@Gdoginya1 Oh yeah i love it ! Nice speed and sounds great . I had to tune it up just a bit but other than that its a great heli have fun !
22NiggaPlease 1 month ago
Hey how much did this heli coast and how can i order this ?
22NiggaPlease 1 month ago
@22NiggaPlease well, i bought this heli 2 years ago @ 250€, today it is cheaper and also a upgraded version available - Belt cpx. i would try to look @ XHeli or nitroplanes or your local hobby shop near you.
GaryX1001 1 month ago
@GaryX1001 I noticed a clip of you on ebay with the same heli being sold and i dont know if the person was just using your clip just to show what it could do or if it ws really you ?
22NiggaPlease 1 month ago
@22NiggaPlease i know, i have seen it. that person is only using my clip to show how it flys.
GaryX1001 1 month ago
@GaryX1001 Ok thanks, Do you think the cpx is better than the cp v2 ? and what do you think is better the cpx or the T-rex ? And ive looked online at Xheli.com and they are sold out do you have any other options ? thank you .
22NiggaPlease 1 month ago
@22NiggaPlease i have not tested the cpx, but they did some improvements compared to the v2. heliguy has it in stock. the trex is much better! problem is, if you start the hobby atm and realise its not for you then the belt cpx is the better choice because the trex costs twice the price and comes without transmitter! spare parts are also cheaper from esky. if you can fly the belt once you can get the trex and then you know you CAN fly it ;)
GaryX1001 1 month ago
@GaryX1001 Good to know good to know ! When i get the cpx ill let you know how it goes ..
22NiggaPlease 1 month ago
@GaryX1001 I understand that the heli does not come fully ready to fly is there things i need to adjust the heli with that the heli might not come with ? because i will order it the same time i order the heli .
22NiggaPlease 1 month ago
@22NiggaPlease most important tools are: swashplate levelling tool & pitch gauge. i recommend a training gear for first hops. before trying to hover (no, not flying!) it is highly recommended to learn controlling a CP heli on the computer! phoenix or heli-x or another simulation. this way you safe alot of money, because you WILL crash :)
come join the myrcguide forum when you have questions with setup and stuff!
GaryX1001 1 month ago
@GaryX1001 Never mind thank you for the help .
22NiggaPlease 1 month ago
Hell ya gary that is what i like to see some speed flight....nice job
vfatnuts 2 months ago
@vfatnuts thx for the kind words vinny, its just: you already posted a comment to this video 1 year ago - lol :)
GaryX1001 1 month ago
@GaryX1001 lmao ya i do that crap sometime lol
vfatnuts 1 month ago
Is this a beginners helicopter? im 10 i got it for christmas i was wondering if it would be good for me.
Ggiven2001 2 months ago
@Ggiven2001 the package says: 14+, these RC helis are no toys, they can hurt you very bad! learn on simulator at first and when you are ready get your dad with you outside for a first real try!
GaryX1001 2 months ago
Did you go into forward flight beforee or after nose in hovering?
chiavernwei 2 months ago
@chiavernwei after nose in training! i wanted to make sure to learn the orientation basics before trying more.
GaryX1001 2 months ago
this is nice helicopter i gat one
raptor3497 2 months ago
Gary, I got this heli with stock gyro, radio & receiver. I had changed the receiver into Orange RX to suit my Futaba radio. Can the stock gyro goes with my present radio & receiver? What blade are you flying with in your video?
stingrayfred1 2 months ago
@stingrayfred1 well, i tried the esky gyro with spektrum RX and it gave the tail random glitches! it worked for a min or two and then out of nowhere the tail turned between 90-180° for no reason by itself! the blades on the belt cp v2 i ALWAYS flew were the esky carbon blades. they were durable and it always flew good!
GaryX1001 2 months ago
for beginners?
MrPelli777 2 months ago
@MrPelli777 you can begin with it, yes, but do not expect to be able to fly around! first step is hovering, hovering & hovering! if you can do that safe you can go one step further (side hovering, nose in hovering.. and so on).. always step by step.
GaryX1001 2 months ago
@GaryX1001 My dad just gave his down to me and its carbon im only 11
MrLuke5050 2 months ago
@MrLuke5050 i would be extremely carfully if you have no experience with RC helicopters! these things can hurt really bad if they hit, so only use when your dad is around with you!
GaryX1001 2 months ago
Excellent job! So you'd recommend this to a beginner flying 6 channels?
jhawk1977 2 months ago
@jhawk1977 well, i only had a blade mcx before this one so.. its all about learning ;) if you manage to fly this heli stable you can fly everything.
GaryX1001 2 months ago
amigo tremendo vuelo
eltigre600 3 months ago
nice fly....
ropi49 9 months ago
@ropi49 thx
GaryX1001 9 months ago
@GaryX1001 have u done anything to the heli?
dontbesoft 3 months ago
Hi Gary,,,,very nice u fly,,,may i know, any upgrade u bcp on this video
drahdyfa 1 year ago
@drahdyfa well, that flight was 10 months ago, dont know what i used there, cant remember :)
i was using a DX7 for sure with esky carbon main blades and tower pro servos. i think i also had the gy-401 already installed, but cannot say 100%. check my newer videos to see the flying difference to this first wild speed flight ;)
GaryX1001 1 year ago
Hooray!! I finally get to see the speed of this thing. Most other vids on these are
begginers hovering or flips n stuff. I just wanted to see it flying FORWARD.
Thanks bro
CrozzleySun 1 year ago
Very nice flying.
My problem with my belt cp is the flight time. I used to get 10 mins flight, but know I only get 6-7 mins. I check many times for binding, but can't find one. I bought a new battery, still give me the same result.
arsitama 1 year ago
funktioniert ja eh schon voll gut!! ;) da sind die loopings und rollen nicht mehr weit!
parasitenkiller 1 year ago
auf loopings oder rollen hab ich aber ehrlich gesagt gar keine lust :)) ich bin mehr der wildflieger anstatt kunstflieger :))
GaryX1001 1 year ago
Hİ Gary
it is a fantastic flight with belt cp
TheAlp75 1 year ago
@TheAlp75 thx :) gave my best
GaryX1001 1 year ago
Realy Nice
Daniel33Kleve 1 year ago
Cool flight!!
RCflyingDave 1 year ago
Super flight!!!
HBFPV2 1 year ago
thx :) i'll improve the next one - i hope.
GaryX1001 1 year ago
I hope you were in a better mode with a smile on your face after that flight :)
Frobard 1 year ago
Lol hey ya i did the same thing i was pissed off and told myself that i dont care if i smashed this thing in the ground....let me just say i did the best flying out of all the fying i have done lolol nice flying by the way
vfatnuts 1 year ago