Added: 2 years ago
From: mudfreak79
Views: 63,740
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (131)

Sign In or Sign Up now to post a comment!
  • Anybody who knows any thing about motors knows a 300 is no sissy motor. One of, if not the strongest motors ever built. They are straight up torque monsters

  • its nice to see a mud truck like that one not all huge with tractor tires and with a lot of power and loud.

  • Floor it and keep diging a deeper hole you stupid ford fuck.

  • @xXPVTHOOAHXx don't bitch cuz you know your shit cant cut a rut faggot

  • I have questions, how much was the 532, tires, lift, by the way i have a 77 F150 with a 300 straight 6 (wussy) i was just wondering what tha total might ring up to

  • that samurai sounds like an RC helicopter

  • I cant get enough of this truck..i want to make babies with it.

  • I have a question. Why was the Sammy not in 4WD? Or does the rotary not allow you to run a transmission that can have a t/c bolted to it?

  • @joebeckham he was just showin off

  • @mudfreak79 I was gonna say. There IS a drive axle under the front, why ain't he using it?! haha I love your truck. I wish my '74 could be as awesome as yours some day.

    Oh, one more question. How does the Dana 44 hold up in your truck with all that power and all that rubber it's spinning?

  • @joebeckham I was running a dana 60 up until this spring, I switched to the d44 to lose weight and so far, other then one hub, nothing has broke

  • @mudfreak79 I am impressed. That big power puts a lot of stress on that little axle. You must be running the 3/4-ton version with chromoly shafts and everything for more strength, though.

  • @joebeckham It has the 1/2 ton 44, but with chromo axles, super joints etc

  • @joebeckham If you can run 44's you dont have that much power going to the wheels, just sayyin(:

  • I miss my 79 150 custom

    But yours is built better

  • Samaruis are cool... too bad there like 3 cyl turbos and not manly at all.

  • that suzuki sounded like a fucking jet ski

  • Mud is a badge of honor how many people agree that seeing through your windshield is overrated

  • pin it to win it!

  • Nice video, I often go to the next one but let this one run through. I have a 78 short bed and a 69 Bronco, would love to get off of the rock and go for a mud run in the Bronco someday.

  • Gotta say I like the look and sound of these Fords. Can you tell me what the purpose of the mud ditches is for? With this much power, these trucks are ready to burn up truck pull hard dirt, pavement,and whatever else. The good thing I can see is that the tires last well in the mud. ...just costs fuel, and that's about it.

  • @wqpeb my ford is not street legal, it is strictly a mud truck, gets trailered everywhere

  • @mudfreak79 I get you. Have fun.

  • another awesome video man!

  • That suzuki sounded like an airplane taking off. I saw one just like it with a rotary motor in it, is this it ?

  • @MrRedneck67 yep thats the one, its orange now though.

  • @MrRedneck67 it may have looked good but its the tires horesepower does help a little but in the the end its the dam tires think about it

  • mud what mud? lol

  • the suzuki just kinda floats and the tires act as propellers lol.... bad to the bone 79 ford that thing looks good sounds good runs good and performs good typical ford haha

  • the suzuki just kinda floats and the tires act as propellers lol.... bad to the bone ford that thing looks good sounds good runs good and performs good typical ford haha

  • The Suzuki is a joke what a peice of shit.loser cruiser

  • love all 3 of the trucks. the 79 is the best though. i got a 76 bronco with a stock engine and a 6 in lift with 39s. we had to cut and bend a lil sheet meatal to give it the perfect fit and look. nice vids.

  • that sounds like one of those model airplanes that kids fly around. hahahaha

  • my god that yellow ford is the shit. i want that truck!!

  • was that gray and white one a diesel? and that is one of the baddest fords i ever seen much better than a piece of shit chevy!!

  • Bullshit a p.o.s. ford! A ford will put pull a shitv any fucking day of the week!

  • GOTTA LOVE THE ROOSTER TAILS ON OLE YELLER !!! ROCKIN VID BOYS !!!

  • what is it just a 502 30 overd? thts what i thought using quality GM parts in a POS ford lol

  • @Frankenstein2008 it is a ford motor, bored and stroked 460, I would never put a PIS GM motor in a kick ass ford LOL

  • @mudfreak79 was it a 390?

  • @mudfreak79 was it a 390? take a look at my truck

  • @fmfpowercore2 It was a 351W, then a 468BBF, then this 532BBF

  • @mudfreak79 Kicked absolute ass

  • @mudfreak79 Ford all day everyday

  • @Frankenstein2008 doesnt BBF mean Big Block Ford

  • @Frankenstein2008 pos ford...u should kick your own self in the nuts!

  • @Frankenstein2008 your a god damn idiot BBF stands for big block Ford, its a 460 thats bored over. and what the hell are you talking about quality gm parts anyway thats bullshit if it had gm parts it would have fallen apart. id take that Ford over any general motors crap any day.

  • sounds like a pist off weed eater

  • That sammy was pretty damn impressive for bein in 2 wheel, and your 532 ripped right through that first pit, love them fuckin fords!

  • PUT IT IN 4 WHEEL DRIVE YOU DIP!!

  • @jwcheeta HAHA yeah he didnt realize he was in 2 wheel drive, we teased him about it, we thought he was just trying to show off.

  • overall how much did just the motor build cost you? im more of a chevy guy but thats a badass rig you got there man! keep it up!

  • I will tell ya what, all: I had a Samurai 4X4, with 33" tires and 6" of lift, and that thing would go places that my Chevy truck with 35" tires and 6" of wished it could. The damn thing was so underpowered that it wouldn't barely spin the tires on dirt. I kick myself everyday for selling it!

    Also, I am not a Ford-man, but that '79 is one that I would own. Nice the way that you have it setup; plus, who could say no to "any" bigblock!

  • hey does anybody know what lift that 90s model ford has on it

  • that samuri is a fuckin beast haha nice truck man

  • haha, what the hell was that little tiny thing, a geo tracker? I dont like them in a shopping center of acme let alone offroad muddin. Anyway nice truck dude. Seen a few of your videos. In the process of watching them all. Im so jealus. Anyway you just got yourself a fan :)

  • @MetalheadSteven HAHA well thanks, that little mud midget is a suzuki samuri that my father in law runs, we swapped in a RX7 rotary engine into it.

  • @mudfreak79 rx7 know wonder that thing is always screamin all the time! i like it thoe

  • that motors got enough power, get some shaved swamper boggers and loose more weight and it will skim across the top of the mud. I know a guy who has a peterbilt semi body on a truck frame with a 500+ cubic inch motor and it skims right over the top. Bet it could just about ride on water.

  • @flecur08 I'll be running some cut boggers this year that are 50lbs lighter each, should make for some faster runs this year.

  • Hey man, you should put ur vids on truckfacecom. I

  • looks a little fucken windy mate!

  • hahahaha that suzuki sounds like a fuckin chainsaw. and its 2 wheel drive!

  • holy shit man your trucks you got there are insane im envious i hope i can have one like that soon

  • rev limiter anyone?

  • got it set at 6800, and that 'geo' is a '88 samuri

  • yellow truck can tow out the other lol oohhhhhhhhhhhhhhhhhhhhhhhhhhhh­hhhhhhhhhhhhhhhhhhhhh;-)

  • is that a geo? i see???

  • try addin some rear end weight on that single cab ford, like sand bags or somethin.. makes for a whole lot more traction. Beatiful trucks tho! FORD

  • I'm in the process of losing more weight off the front right now, should have the same affect hopefully

  • Do you have a website, or a thread on a forum of the build up of this truck? I really hope so, I'd love to read it if you do.

  • somebody's sawing down a tree on the 1st clip

  • is your engine carb'd or fuel injected?

  • carbed

  • DAMN!!!!

  • Mudbath anybody? Helluva truck you have there my friend!

  • 532bbf tires or boggers tires whick you think are better ? i run boggers

  • boggers compared to what? I think boggers are best for mud racing.

  • haha that guy dont know what he is talking about! lol

  • It's been awesome watching this truck transform into what it is today. awesome job!

  • im a die-hard bowtie guy, but i gotta say that 532BBF is sick!!

  • if i were you and your not using it as a street vehicle which your probably not id take a plasma cutter to it and cut off a little bit of weight to get it really scootin

  • Is your intake running into the cab?

  • nope, the engine bay gets sealed off before we run it in the mud

  • hey buddy! i was thinking man if you did run your intake into the cab you wouldent have the fuckaround you did in gp with the water (and my mud flap,haha) git r dun!!! peg

  • that Yellow Ford is RANK!! How many Hp is that Engine putting out?

  • that suzuki was sweet giving that mud hell in 2 wheel drive the ford pretty sweet to

  • what tranny is it?

  • C6 auto

  • that samurai sounds like it has a rotary engine!!!!

  • 12A rotary

  • Comment removed

  • WOW............that 79 is the fucking shit

  • @killswitch6988 Ha! and you think your ride can do better?

  • lol that fuckin zuzu sounded like the old model plane me and my pop used to fly.....BADASS!!!!!!!!!!

  • and hell no my old stroky wouldnt make it through that shit no way in hell..but i love gettin mine dirty thats fore sure!!!!!!!nice powerstroke!!!!!!!

  • niche ...thats ford is a 79 isnt it??? what kindof motor u running

  • 532 BBF

  • thats the most badass ford ive ever seen

  • bad ass littel 4 banger lol

  • wow your truck is awesome even when you did get stuck it was awesome throwing alot of mud

  • If you going to donnely this year i'll see ya their (I run the grain truck)

  • thats awesome!!!

  • This truck is so sick. but you gotta watch out for just pure water. i just destoried my 351 cause of Hydro Locking it. Now i gotta put a new in by Saturday. hahahaha, still fun though

  • Ah yeh, i thought thats why you had held off. I'm going to be running the usual 52s on my bronco with them. Still debating what engine to use..Not too sure if a stock 460 from the mid 80s would even be worth installing LOL

  • hey man dont know if u decide on ur motor yet or not but i would deffinatly put an old 460 in her...u cant beat the sound of a nasty big block chuggin through the deep stuff!!!!!!!!plus they r durable as hell!!!!!!FORD ALL THE WAY!!!!!!!!

  • it is a 460

  • ???not sure wat coment ur replying to...i dont remember saying anything about the 460...ecept to another guy...lol unless ur the same guy..lol...happy posting bro

  • oh my bad bro i think ur talkin about the truck in the vid..yeah??...regardless though its a damn nice truck....

  • Great build bud, that things an animal! Out of my own curiousity, you ever going to run rockwells? You've got the engine now, now add the rest..I KNOW Alberta has some real deep bottomless pits ;)

  • Thanks, I have thought about rockwells, but for the mud bog races they're alittle on the heavy side. I'm trying to lighten it up as much as reasonably possible right now. If I ever decided that I needed to go to a 47" or bigger tire then rockwells would be a must HAHA

  • thats sick

  • Whats up dude very nice truck love the new motor

    sure u like it too. Where do u race this truck love to see it for real. In action

  • I race it in northern Alberta and British Columbia

  • lol you lucky fuck i wish my 79 was half way as nice as yours. sounds fucking beastly and its crazy how the fords throwin 20 foot locked roosts straight up. lotta power love it good luck this season

  • hopefully there won't be as much water next time you can't tell the real power.

  • hey bud, its peg. thanks for putting the vids on youtube. got the t case out and half done. thanks for the advise!

  • no problem man, anytime, thats what we're all here for!!

  • haha WOW that was hilarious .... i didnt see that one comming ... you guys caught me off guard with that on that too FUNNY !!! [=

  • alright, i think its ready to win all the competitions haha

  • what kind of tranny do you need to put that power to the ground? if you ever have time when your working on your truck, (building a engine, installing tranny, new rear end), could you film it please? There arent many vids of that by people that know what they're doing. YELLER FORD=BEAST!!

  • I run a C6 trans, TCS converter, B&M shift kit etc. With a huge cooler on it, haven't had much for problems so far but we'll see what the new motor does to it. I could record installs or whatever, but its kinda tough to hold the parts, the wrench and the camera all at once LOL.

  • TRIPOD!! haha. if you dont mind, do you have an estimate on how much you've invested so far? private mesage is ok if you dont want to tell the world lol

  • I was wondering where you had your radiator mounted, I seen it in the back there in the last bit.

  • God damn man you got that 532 running right man. what all did you do to it? heads? cam? lifters? rockers?

  • Yep all of the above

  • sexy ass truck

  • lol that wasn't even a challenge

  • nice

  • Looking good!!!

  • sweet can't wait for mud season to start

  • hahaha very nice! the BBF is like 4 post hole diggers...nice job!

  • first comment lookin' good

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more