You want me to do a shooting video with a review. You say this on both review and shooting test videos of the gun. All you want is probably in the two videos you visited.
Yes, but Airsplat only sells the version 1 revolver. I bought the version 2, which has a stronger spring and a few other build improvements. You get what you pay for.
@TDUShelby What are the differences, exactly? I guess you have money to just throw around, which in that case, I guess it's ok to go $40 extra for an *extremely* similar version.
Aesthetically, they are identical, save for the "Sport 702" thing on the barrel, but the version 2 is fitted with a stronger hammer spring which produces considerably more power than its predecessor.
@TDUShelby So is the fps on this one higher? Sounds pretty good. By the way, sorry about me being a bit rude on my last comment, I was kinda annoyed when I found that you bought the expensive one while I can't even afford the cheapest of these :P. I'll probably save up and hope they put cheaper revolvers on the market.
I'm fairly sure. I'm not really an expert on the subject. You might PM ShortyUSA's channel. They've answered all my questions before, so they SHOULD answer yours.
It's all good. Most comments sound either rude or retarded to me because I have a relatively low view on humanity. (LOLOLOL) No offense taken :)
You don't necessarily HAVE to get one of these ridiculously expensive revolvers. TSD and UHC make some beautiful (albeit plastic) gas and spring revolvers for $50 or less.
@TDUShelby $50 or less? Do you know any good places where I can buy them? I normally shop at airsplat and their min price for revolvers is up at $99. I did a google search and I didn't find anything good over $60, (the cheap ones had a preposterously low fps).
If you get a few more speedloaders and shells, and you want a challenge, then go right ahead. If you're good with hitting any one target with at least 2-6 shots, then this would give you the incentive to do just that.
Well, thank you. Now, not to sound "off" or anything, but I would appreciate it if you actually made sure you wanted to subscribe i.e. watch my other videos. Only about ten percent of my subs actually watch my videos. So, if you don't like my stuff, I wouldn't blame you for unsubscribing.
hey i was wanting to if this would be good for a sniper on the airsoft field. can this gun fit in a real fitted revolver case so it can be pulled out fast and easy, is it good at, lets say 60 feet? what size BB should i use? let me know! i wanna buy this gun!
It's good on range unless there's wind... at all. I'm not sure about fitting it in a holster because I don't actually own one, but if you happen to find one that will fit large revolvers, it should work. Heck, I think a Desert Eagle holster would probably be a snug fit, if you have nothing else to go by.
It requires Co2 to work. A "working hammer" means that it's the mechanism that actually makes the gun shoot. So, it won't fire if the hammer doesn't go back, but it's a double action, so it can be fired both ways.
Well, in America at least, removing the orange tip is illegal. However, as long as you NEVER take it outside of your house or an airsoft field, that particular law is never enforced and you can remove it.
Now, for movie makers, as long as you tell your neighbors and police department that you are filming with realistic toy guns, you can use them for filming.
Up until this last month, I was unaware that any other company started manufacturing these M700 revolvers, so do your research. I can't really help you there.
Now, as for airsoft revolver brands in general, UHC is the dominant brand, as they have more models and sales than anyone else. HFC makes a .357 combat gas revolver, but the paint is, to be blunt, DOODY.
I don't think any one brand is "better," so much as things such as paint and models differ. Just do your research.
i love the look of this gun and was going to get one i would just like to know whenever you put in the gas cartridge and tighten up the screw and it goes sssshhhhhh do you have a certain time to use up all the gas if not how long does gas stay in cartridge
That's what the gas seal is for. No gas will escape during use. HOWEVER!!! Do NOT leave a full cartridge inside for an extended time or you WILL bust the seal and ruin the gun. As long as it's about 75 percent full, you can leave it in for hours and hours without worry.
It's said right in the video what it does... well, not straight up, but it's in there. Also, anyone who knows anything at all about guns knows what uncocking it does.
@Starkidfreakinamazin The new 4'' Dan Wesson revolver is somewhat practical if you know how to use it. You'll need more shells and speed loaders if you are planning on using it. If your like me, all my gas blow back pistols get sandy and gum up causing a malfunction, but you shouldn't see that coming from a revolver. I'm about to buy and carry two on my tac belt.
I have the same type of revolver and mines hammer is extremely wobbly, and the cylinder when outward can be pulled of the track or whatever it is called, is this normal, or is mine defective?
Mine has some hammer wobble, for sure, and I can pull the cylinder off of the plunger, but unless it's really and truly bad (like, the cylinder falls off if you tilt it back), then don't worry too much about it.
1) If it's still under warranty, send it back and see if they'll fix it.
2) Add a very thin ring of hot glue. I'm relatively certain all you have to worry about is still letting the plunger spin. You may lose the plunger's function, but you just tilt it back to lose the shells anyway.
It's more personal preference than usability. Depending on the barrel length, you get more weight.
Sure, the 8 inch gives an edge in accuracy, but this gun isn't really meant to be used in a war anyway. It's too powerful for CQB, and not accurate enough for a primary.
Forgive me for answering a question with a question. Is it not clear enough in the video? I not only put it in the in-video subtitles, but I also put it in the video description. Please look!
A reviewer reviews a product. Whether or not everyone knows the product back to front is not taken into account. A detailed review reviews everything.
@Grapist25 i had no clue on how to use that speed loader dude so calm down man hes just reviewing and maby some people dont plaay airsoft and just watched the video and didnt know what a speed loader is
does anybody know a sight that will ship one of these to Canada or will the "clear gun" law become a pain in the ass? Evike is out of stock and its going to be a while before i go to the states so if you can help me out i really appreciate it
dont listen to these guys there retards besides just a question when you buy a revolver does it come with everything like speed reloader bbs and shells
i still don't know why they made an amazing pistol then made it co2 powered so that it was too powerful for most fields and is way too powerful for cqb which i honestly thought pistols were designed to be used....
Can you remover the orange tip? Cuz like most revolvers have just the orange circle but that looks different and more difficult to remove. Am I right?
Yes, you can, but it REQUIRES a buzz saw to remove the actual tip. Spray painting over it would be okay, but you'd end up with the tip itself which just looks awful when silver.
My friends and I love to have airsoft wars, when I told them I was getting this gun, they said revolvers suck and are just for show. I really want to buy this gun and love it, but is it worth buying? Is it good in battle??
Hey, don't listen to your friends when it comes to what you like. If you want this gun, just don't give a crap and get it anyway.
To answer your questions, it's worth buying depending on what you want it for. It's good for showing, plinking, and loving revolvers, but it's not going to be the most practical in battle. Sadly, no revolvers are battle-ready guns. regardless, get it because you like it. It's good for movie making, shooting your frien-- I mean cans, stuff like that.
can u make another wg m702 full metal co2 revolver viideo wit u shooting stuff and reviewing the gun
tdoran31 3 weeks ago
@tdoran31
You want me to do a shooting video with a review. You say this on both review and shooting test videos of the gun. All you want is probably in the two videos you visited.
TDUShelby 3 weeks ago
You sound like Leonard from The Big Bang Theory.
LiquistikCollective 4 weeks ago 4
@LiquistikCollective
I don't watch Big Bang Theory, so I don't know if that's a good thing or not. Enlighten me or don't. I'd appreciate an answer, though.
TDUShelby 4 weeks ago
@TDUShelby It's a good thing, he's a funny guy (his character is anyway).
LiquistikCollective 6 days ago
sounds like my bus driver
okmankk 1 month ago
alright thanks
sniperNghillie97 1 month ago
I got it at airsplat for $105! You gotta always scower the internet for the best deal!
MajorBanana64 1 month ago
@MajorBanana64
Extended research would have lead you to find out that airsplat does not sell the version 2 revolver. ShortyUSA does.
TDUShelby 1 month ago
@TDUShelby oh i guess its a different gun...but it looks the same
MajorBanana64 1 month ago
that is an awesome gun
bigman1149 1 month ago
decocker!!!!
sparker997 2 months ago
I have this awesome revolver, as soon as i opened the box i took the orange tip off. lol
Quetzalqoatl99 2 months ago
russian relent sounds better :p
skullzrulemymind 2 months ago
will this gun break easy i know it is metal but mot metal guns break easy
34HALOFAN 3 months ago
@34HALOFAN
Let me put it this way. I hope I never have to find out.
TDUShelby 3 months ago 3
@TDUShelby ha right
cookiemonster970 3 months ago
try to play russian relent
cornholio3456 3 months ago
@cornholio3456
Roulette. Russian Roulette.
TDUShelby 3 months ago 12
@TDUShelby I mean roulette can be something hard to spell but he was way fucking off lol
Moneyman461 3 months ago
@cornholio3456 that would hurt like fuck and it can break skin
erpderp101 1 month ago
2 things, REVOLVERS ARE BADASS, and my sister's name is shelby....
pugdude14 3 months ago
Thanks
Bowman333334 3 months ago
rofl, u spent 139.99 dollars for that! On airsplat.com you can get the SAME exact gun for 99.99 dollars.... 6 inch and everything
MrKillman34 3 months ago
@MrKillman34
Yes, but Airsplat only sells the version 1 revolver. I bought the version 2, which has a stronger spring and a few other build improvements. You get what you pay for.
TDUShelby 3 months ago
@TDUShelby What are the differences, exactly? I guess you have money to just throw around, which in that case, I guess it's ok to go $40 extra for an *extremely* similar version.
blitzviridis 3 months ago
@blitzviridis
Aesthetically, they are identical, save for the "Sport 702" thing on the barrel, but the version 2 is fitted with a stronger hammer spring which produces considerably more power than its predecessor.
TDUShelby 3 months ago
@TDUShelby So is the fps on this one higher? Sounds pretty good. By the way, sorry about me being a bit rude on my last comment, I was kinda annoyed when I found that you bought the expensive one while I can't even afford the cheapest of these :P. I'll probably save up and hope they put cheaper revolvers on the market.
blitzviridis 3 months ago
@blitzviridis
I'm fairly sure. I'm not really an expert on the subject. You might PM ShortyUSA's channel. They've answered all my questions before, so they SHOULD answer yours.
It's all good. Most comments sound either rude or retarded to me because I have a relatively low view on humanity. (LOLOLOL) No offense taken :)
You don't necessarily HAVE to get one of these ridiculously expensive revolvers. TSD and UHC make some beautiful (albeit plastic) gas and spring revolvers for $50 or less.
TDUShelby 3 months ago
@TDUShelby $50 or less? Do you know any good places where I can buy them? I normally shop at airsplat and their min price for revolvers is up at $99. I did a google search and I didn't find anything good over $60, (the cheap ones had a preposterously low fps).
blitzviridis 3 months ago
Would you recommend this for the field and just target shooting
Bowman333334 3 months ago
@Bowman333334
Use your own logic for deciding if it would be good at field work. It's mainly a target annihilator, I think.
TDUShelby 3 months ago
The 701 version (Shorter Barrel, same design) Is currently on sale at airsoft megastore for $98, Im gonna definately get it, thx 4 the awesome review
NicoGrender17 3 months ago
I might get a 4in version. One of my cousins bought the 8in and broke it but only because he's a dumbass.
OR I could buy the 2.5 in version and use it as a backup for my secondary!
Yeah! I can see it now.
Wabaanimkii 3 months ago
Would you recommend this as a back up for a pistol.
Darklink666Mr 3 months ago
@Darklink666Mr
If you get a few more speedloaders and shells, and you want a challenge, then go right ahead. If you're good with hitting any one target with at least 2-6 shots, then this would give you the incentive to do just that.
TDUShelby 3 months ago
Can somebody PLEASE tell me where the hop up is on this gun!? Thanks!
MrGlockfan45 4 months ago
@MrGlockfan45
It's a revolver. If you can't find it by shoving your eye down the barrel (with it unloaded, of course) then there isn't one.
P.S.: There is no hop-up on this gun!
TDUShelby 4 months ago
@TDUShelby Thanks man, i was just wondering. Thanks again, I give you a sub it return ^_^
MrGlockfan45 4 months ago
@MrGlockfan45
Well, thank you. Now, not to sound "off" or anything, but I would appreciate it if you actually made sure you wanted to subscribe i.e. watch my other videos. Only about ten percent of my subs actually watch my videos. So, if you don't like my stuff, I wouldn't blame you for unsubscribing.
TDUShelby 3 months ago
hey i was wanting to if this would be good for a sniper on the airsoft field. can this gun fit in a real fitted revolver case so it can be pulled out fast and easy, is it good at, lets say 60 feet? what size BB should i use? let me know! i wanna buy this gun!
sniperNghillie97 4 months ago
@sniperNghillie97
It's good on range unless there's wind... at all. I'm not sure about fitting it in a holster because I don't actually own one, but if you happen to find one that will fit large revolvers, it should work. Heck, I think a Desert Eagle holster would probably be a snug fit, if you have nothing else to go by.
TDUShelby 4 months ago
cut your unibrow
weezow 4 months ago
@weezow
I did MONTHS ago... just not before this video, unfortunately
XD
TDUShelby 4 months ago
So i looked up this gun on a lot of sites and they said it has" a working hammer" dose that mean it also works as a spring or is it mainly a co2
DemonboyProductions 4 months ago
@DemonboyProductions
It requires Co2 to work. A "working hammer" means that it's the mechanism that actually makes the gun shoot. So, it won't fire if the hammer doesn't go back, but it's a double action, so it can be fired both ways.
TDUShelby 4 months ago
why i can't remove the orange tip?
antonioriquelme1 4 months ago
@antonioriquelme1
Well, in America at least, removing the orange tip is illegal. However, as long as you NEVER take it outside of your house or an airsoft field, that particular law is never enforced and you can remove it.
Now, for movie makers, as long as you tell your neighbors and police department that you are filming with realistic toy guns, you can use them for filming.
TDUShelby 4 months ago
Which brand is the best?
stephenodea619 4 months ago
@stephenodea619
Up until this last month, I was unaware that any other company started manufacturing these M700 revolvers, so do your research. I can't really help you there.
Now, as for airsoft revolver brands in general, UHC is the dominant brand, as they have more models and sales than anyone else. HFC makes a .357 combat gas revolver, but the paint is, to be blunt, DOODY.
I don't think any one brand is "better," so much as things such as paint and models differ. Just do your research.
TDUShelby 4 months ago
@stephenodea619 Wingun.
tropixsongs 4 months ago
2:26 thats what she said
Xairsofterpwns 4 months ago
i love the look of this gun and was going to get one i would just like to know whenever you put in the gas cartridge and tighten up the screw and it goes sssshhhhhh do you have a certain time to use up all the gas if not how long does gas stay in cartridge
starvinmarvin74 4 months ago
@starvinmarvin74
That's what the gas seal is for. No gas will escape during use. HOWEVER!!! Do NOT leave a full cartridge inside for an extended time or you WILL bust the seal and ruin the gun. As long as it's about 75 percent full, you can leave it in for hours and hours without worry.
It's more of a common sense thing than a problem.
TDUShelby 4 months ago
@TDUShelby Thanks for the reply i found it very useful
starvinmarvin74 4 months ago
this gun is sick dude
sniperTHM 4 months ago
its true u shall not (put it this way) remove the tip 'cause other people will think it is real and call the cops on you!!!!
24jdante 4 months ago
How many joules? Can it shoot 6mm steel bbs. Like .177 bbs only 6mm. Like the kind you can use on airsoft snipers. Thanks.
BloodSpawn33 4 months ago
@BloodSpawn33
I don't know how many joules... enough to where most airsoft fields have banned this gun.
This thing blasts out BBs at such a high velocity, I don't see any logical reason why it couldn't use steel rounds.
TDUShelby 4 months ago
Dan Wesson m702 vs WG which would win?
answer me please
becouse i dont know what to buy
thanks
e1000iano0 5 months ago
@e1000iano0
I have no clue. Sorry. I've been a bit out of touch with the airsoft market lately.
Use your discrimination and do your research. Then decide which one to buy.
TDUShelby 5 months ago
speed loader is shit n no point
zombiekiller441 5 months ago
@zombiekiller441
It has a major point if you have multiple speed loaders and shells to go with them.
TDUShelby 5 months ago
dam nice gun
TheGreenbeanman 5 months ago
@cozwald25 the shells are just for putting in bullets like using magazines
thecrazyfirekid 5 months ago
@cozwald25
Of course!
TDUShelby 5 months ago
DEEEEEEAAAAAARRRRRR Santa....
HALOMANIACALEX 5 months ago
Sick intro lol.
MercurialIris 5 months ago
can you pull the hammer back?
Nick4563880 5 months ago
@Nick4563880
Not to be rude, but did you even WATCH the video?
TDUShelby 5 months ago
@TDUShelby Lol. Yeah after i posted it I he just pulled it back but i had already posted
Nick4563880 5 months ago
wut does de cocking it do exactly
Blonkashire 6 months ago
@Blonkashire
It's said right in the video what it does... well, not straight up, but it's in there. Also, anyone who knows anything at all about guns knows what uncocking it does.
TDUShelby 6 months ago
I'd read that this contains no hop-up unit, fixed or adjustable; trying to figure it out for myself. Is this true?
If so...regardless of how powerful it is, can't completely control where the shot goes once it's hit by windage. That'd suck.
rsenic7 6 months ago
@rsenic7
As near as I could tell, there is no hop up. It's not meant to be any more than a crazy powerful pistol anyway.
TDUShelby 6 months ago
what happens when you finish all of the gas in the handle thing and where do you get more
gothix789 6 months ago
@gothix789
When it's empty, it will simply stop firing. Crosman Co2 is easily and readily available in 5 to 24 packs at Wal Mart.
TDUShelby 6 months ago
Dude, You sound like lennard from the Big Bang Theory. But Great vid and a great gun!
Martenslump 6 months ago
dude that song is asowme
callerofmusic 6 months ago
@callerofmusic
Oh... okay. Thank you. Haven't gotten a comment on that before :)
TDUShelby 6 months ago
Nice video! i like your rules on the video! its good you show some people how to respect! :))
Mishomtp 6 months ago
face of a virgin that plays with toy guns at 4:26
XIIIFloor 6 months ago
@XIIIFloor
Your point being?
TDUShelby 6 months ago
How much does it cost?
1musketeerof3 6 months ago
@1musketeerof3
Either read the captions in the video or check the video description.
TDUShelby 6 months ago
@TDUShelby thank you
1musketeerof3 6 months ago
shoot it?
xRecczzz 6 months ago
@Starkidfreakinamazin The new 4'' Dan Wesson revolver is somewhat practical if you know how to use it. You'll need more shells and speed loaders if you are planning on using it. If your like me, all my gas blow back pistols get sandy and gum up causing a malfunction, but you shouldn't see that coming from a revolver. I'm about to buy and carry two on my tac belt.
PvtPackman 6 months ago
he said cocker lol.
War2011Machine 7 months ago
@Starkidfreakinamazin
In a skirmish? Jack sh*t.
TDUShelby 7 months ago
I have the same type of revolver and mines hammer is extremely wobbly, and the cylinder when outward can be pulled of the track or whatever it is called, is this normal, or is mine defective?
exceler01 7 months ago
@exceler01
Mine has some hammer wobble, for sure, and I can pull the cylinder off of the plunger, but unless it's really and truly bad (like, the cylinder falls off if you tilt it back), then don't worry too much about it.
TDUShelby 7 months ago
@TDUShelby Is there any way to fix this? Mines cylinder when tilted falls out partially and is only caught (barely) on the grip.
exceler01 7 months ago
@exceler01
Okay, then, I have two suggestions.
1) If it's still under warranty, send it back and see if they'll fix it.
2) Add a very thin ring of hot glue. I'm relatively certain all you have to worry about is still letting the plunger spin. You may lose the plunger's function, but you just tilt it back to lose the shells anyway.
TDUShelby 7 months ago
@TDUShelby If I do super glue it, will I be able to spin the cylinder, and how long would a warranty last?
exceler01 7 months ago
@exceler01
Check to see where it spins and how it spins. I'm not sure myself.
Different sites have different warranties. ShortyUSA has a few months, but I'm not sure what other sites have.
TDUShelby 7 months ago
ill de-cock u jk lol
1265tonytran 7 months ago
should have bought it on airsplat its fuckin 104.99 for 4 6 in
1265tonytran 7 months ago
@1265tonytran
It's cheaper for the Version 1. Shorty sells the version 2, which is better and more expensive.
TDUShelby 7 months ago
@TDUShelby how do you know which one is version one and which is version 2
RatedRAli 7 months ago
@RatedRAli
Well, the only real way to tell is if it's specified on the site. ShortyUSA sells them, if you want assurance.
TDUShelby 7 months ago
which is better to use in airsoft matchs, 4, 6 or 8
dfrlz2 7 months ago in playlist Airsoft
@dfrlz2
It's more personal preference than usability. Depending on the barrel length, you get more weight.
Sure, the 8 inch gives an edge in accuracy, but this gun isn't really meant to be used in a war anyway. It's too powerful for CQB, and not accurate enough for a primary.
TDUShelby 7 months ago
@TDUShelby Well if you use BB's with higher weight then shouldnt the FPS drop
clonemovies123 7 months ago
@clonemovies123
It really doesn't matter. This gun is overpowered anyway.
TDUShelby 7 months ago
wow im going to see if i want one of these
topgunner16 7 months ago
hey could you tell me where you bought this?
mystriddlery 7 months ago
@mystriddlery
Forgive me for answering a question with a question. Is it not clear enough in the video? I not only put it in the in-video subtitles, but I also put it in the video description. Please look!
TDUShelby 7 months ago
Oh ok. Thanks for helping me out.
audiofonics 7 months ago
Press 2 for "crappy bbs"
GusyLOC 7 months ago
Can I use aluminum 6mm .30g bbs?
audiofonics 7 months ago
@audiofonics
I don't see a problem with the weight, but I'm not familiar with aluminium BBs.
TDUShelby 7 months ago
I just order this gun I I was wondering what kind of bbs should I get for this gun?
audiofonics 7 months ago
@audiofonics
I use .28g. Reason is, you need to have a heavier BB for this because you need accuracy AND you need to slow it down a bit.
TDUShelby 7 months ago
Is it also double action?
bigfoot519 8 months ago
@bigfoot519
As near as makes no difference all gas revolvers are double-action.
TDUShelby 8 months ago
Shit motherfucker as tits cunt cock
Motherfucker shit ass tits motherfucker shit
God damn it bitch ass cunt shit cock ass bitch
pikachu7567 8 months ago
@pikachu7567
Ookay, then.
TDUShelby 8 months ago
:3 tht is definately a decocker, and im not talkin about the lever on back ;)
PTWAPOCALYPS 8 months ago
@PTWAPOCALYPS
Hurr hurr double entendre.
TDUShelby 8 months ago
@TDUShelby Haha, yup. Put a review! People dig the Thompson because... well its the killer weapon used by the Mofia! Tell me when you have it up!
LegalSk8boarding 8 months ago
@LegalSk8boarding
Well, not to be rude, but I wouldn't remember. It'd be a sure thing if you would just sub.
TDUShelby 8 months ago
Fuck! God damn it! Sorry, had to break the rules. But do you have a review on the M1A1 fully metal? I have it and its beast!
LegalSk8boarding 8 months ago
@LegalSk8boarding
You talkin' about the Thompson? I have one, but no review... YET *devilish grin*
TDUShelby 8 months ago
everyone knows how to use a fucking speed loader
Grapist25 8 months ago
@Grapist25
A reviewer reviews a product. Whether or not everyone knows the product back to front is not taken into account. A detailed review reviews everything.
Enter, my review.
TDUShelby 8 months ago
@Grapist25 i had no clue on how to use that speed loader dude so calm down man hes just reviewing and maby some people dont plaay airsoft and just watched the video and didnt know what a speed loader is
MrVidman101 8 months ago
where did u get this
TH3KILLZ 8 months ago
Umm is it a good starter gun which one is
shaheennobar 8 months ago
@shaheennobar
I don't understand the entire question. But, no, it is not a good starter gun in terms of being battle-ready.
In terms of plinking, though, a monkey could use it.
TDUShelby 8 months ago
@TDUShelby thanks I meant wwhich one is a good battle wise starter if this is not please reply and thanks tons :)
FeredoonN 8 months ago
@FeredoonN
It's not good for skirmishes, but it's easy to use.
TDUShelby 8 months ago
this gun looks fun, but not practical in any way
lamefilms 8 months ago
@lamefilms ur wierd
TheGingervitas 8 months ago
dude where did you get this gun it looks sweet!
SuperCreepydude 8 months ago
@SuperCreepydude
Check the video description, please.
TDUShelby 8 months ago
wow they dont have a decocker
TheShortmicnuffin 8 months ago
@TheShortmicnuffin they dont? then what was he doing? magic?
lamefilms 8 months ago
where do you find it like is there a certain name or under a category
MrScorpionsbitterbit 8 months ago
@MrScorpionsbitterbit
You mean on the site? Go to "Gas Guns" and type "revolver" in the search bar.
TDUShelby 8 months ago
atheism.
lol, now seriously, its not illegal to remove orange tip and its actually perfectly fine.
supergiff8 8 months ago
what website did you buy your win gun off of
MrScorpionsbitterbit 9 months ago
@MrScorpionsbitterbit
Check the video description.
TDUShelby 9 months ago
does anybody know a sight that will ship one of these to Canada or will the "clear gun" law become a pain in the ass? Evike is out of stock and its going to be a while before i go to the states so if you can help me out i really appreciate it
Nick4563880 9 months ago
the F-word
TheMadnesscombatfan 9 months ago
@TheMadnesscombatfan
lol
TDUShelby 9 months ago
dont listen to these guys there retards besides just a question when you buy a revolver does it come with everything like speed reloader bbs and shells
MrScorpionsbitterbit 9 months ago
@MrScorpionsbitterbit
It depends. TSD revolvers only come with shells, the Tanaka revolvers don't use shells, and the WinGun revolvers come with all three.
TDUShelby 9 months ago
nice review i am getting it now
TheAirsoft463 9 months ago
you like balls
TOTCproductions31 9 months ago
@TOTCproductions31
Yeah, GOLF balls. Suck a big one!
TDUShelby 9 months ago
wouldn't it be awesome if it had full auto? overkill. Also, an extended mag, 400 shot.
Russiaizfun 9 months ago
@Russiaizfun
Dunno about full auto, but if you gave it the BioShock treatment you could put in some sort of magazine.
TDUShelby 9 months ago
Will this gun make you bleed? if so how much? is it really painful?
Russiaizfun 9 months ago
@Russiaizfun
I have no idea. I've never shot anyone nor have I been shot.
TDUShelby 9 months ago
You have terrible French...
CunningDragonite97 9 months ago
does the model 701 have a de cocker to?
antihero98 9 months ago
@antihero98
Yes, it does. They're both in the same series, so the features are the same. The only difference with the guns is the barrel.
TDUShelby 9 months ago
Yay have a enough money to buy this amazing gun
iamjames111 9 months ago
I just ordered one of these today, 4 in barrel though :)
joshklutch 9 months ago
i still don't know why they made an amazing pistol then made it co2 powered so that it was too powerful for most fields and is way too powerful for cqb which i honestly thought pistols were designed to be used....
blakfalcon1 9 months ago
this is like the american version of the europeean dan wesson made by asg
andreidane 9 months ago
i want sell my g36c and buy this gun
extreame95 9 months ago
Instructions? who need instructions???
miguelazue95 9 months ago
my guns leaking under the hammer any help?
aerosmithcdc 9 months ago
@aerosmithcdc
I can't help you there. Sorry.
Message the ShortyUSA YT channel, they'll probably help you.
TDUShelby 9 months ago
Can you remover the orange tip? Cuz like most revolvers have just the orange circle but that looks different and more difficult to remove. Am I right?
SuperMonkeyAddicting 10 months ago
@SuperMonkeyAddicting
Yes, you can, but it REQUIRES a buzz saw to remove the actual tip. Spray painting over it would be okay, but you'd end up with the tip itself which just looks awful when silver.
TDUShelby 10 months ago
@TDUShelby Ok thank you very much for your help
SuperMonkeyAddicting 9 months ago
Great review!! Thanks it really helped I'm gonna go buy it now;)
Kayngster24 10 months ago
My friends and I love to have airsoft wars, when I told them I was getting this gun, they said revolvers suck and are just for show. I really want to buy this gun and love it, but is it worth buying? Is it good in battle??
(please answer)
ComedyUpload101 10 months ago
@ComedyUpload101
Hey, don't listen to your friends when it comes to what you like. If you want this gun, just don't give a crap and get it anyway.
To answer your questions, it's worth buying depending on what you want it for. It's good for showing, plinking, and loving revolvers, but it's not going to be the most practical in battle. Sadly, no revolvers are battle-ready guns. regardless, get it because you like it. It's good for movie making, shooting your frien-- I mean cans, stuff like that.
TDUShelby 10 months ago
Why shouldn't I remove that orange tip?
I mean, is it because it's difficult or because it would affect any aspect of the gun?
I really hate it haha
DesertGround 10 months ago