Also, you might try experimenting with heat like from an immersion water heater (for heating up a cup of coffee) or a heating pad. Also, gradually adding a load to the engine would measure its torque and ability to do work. This would most easily be done with a power generator. This is a stunning revelation to me that the GEET engine was nothing but flim flam used to either mislead people or else to make it patentable. Amazing that we didn't see the obvious all along.
Yes on a pressure washer, without the pump on the front. I need a tachometer to see how fast the engine runs. I believe the engine was running a bit slow than before.
I like what your doing... If I wasnt waiting for someone I'd be making one right now... does it work under load ok? (thinking of my motorbike?)
Just pop a couple of pan scourers in the jar... if you stop the big bubbles/splashes you should be ok? Failing that an inline water trap (empty jar linke your reactor ;)
Hi! If I were you, I would start with a small engine, not on a big project. I'm still on a learning stage right now, just like you. I'm sure that the engine will take a load. But I'm not 100% satisfied with the result I'm getting with this system. It you be better for you to start with a stationary engine like a generator. It still needs a lot of tweaking. Yes an anti splash in the bubbler will definitely a big improvement.
You're doing more to reduce our dependance on oil than the gubmint, ha!
SakoTGrimes 1 week ago
does it have any power.....
imenhoteb 1 year ago
Also, you might try experimenting with heat like from an immersion water heater (for heating up a cup of coffee) or a heating pad. Also, gradually adding a load to the engine would measure its torque and ability to do work. This would most easily be done with a power generator. This is a stunning revelation to me that the GEET engine was nothing but flim flam used to either mislead people or else to make it patentable. Amazing that we didn't see the obvious all along.
OutaSynch 2 years ago
it should work with the coffee machine. gas will expend.
ELManlinos 2 years ago
If more torque is needed, maybe adding an aquarium aerator motor to create additional gasoline vapors in the jug would help.
OutaSynch 2 years ago
I would work, i'm sure!
ELManlinos 2 years ago
I wonder if adding an faucet or fish tank aerator in the gas/water container would help.
OutaSynch 2 years ago
what if you were vapourizing only gas..would you still get a benefit?....does the water double your gas lasting time?
nexgeninthemaking 2 years ago
and no torque was had =[
theomnificentPK 2 years ago
sweet baby yummy
windsurf7772 3 years ago
Sweet :)
livinggas 3 years ago
ElManlinos, i sent to you a private message but i've not received any reply yet. I need to ask to you some things.
Simone.
simonepoggi 3 years ago
If you watch the video, it tells you how much, no water was consumed.
ELManlinos 3 years ago
u say it ran for 40 mnts ,but how much of gasoline and water i mean oz
pls reply
paulsonaivy 3 years ago
Your bubbling air through the liquid fuel. The resulting vapor goes directly into the intake manifold.
Samexplode 3 years ago
Exactly!!!!
ELManlinos 3 years ago
The thing you made vaporizes fuel more efficiently.
Samexplode 3 years ago
Looks like a Pantone GEET scheme/setup
mre2u2 3 years ago
I did some calculations and if I figured it correctly, based on the numbers you gave, you will get approximately 50.5 hours/gallon. Very very good.
Keep up the good work.
BTW, was that your GEET set up on the pressure washer?
TDog1977 3 years ago
Yes on a pressure washer, without the pump on the front. I need a tachometer to see how fast the engine runs. I believe the engine was running a bit slow than before.
ELManlinos 3 years ago
I'm not done with my setup, I'm still having problems consuming water.
ELManlinos 3 years ago
I like what your doing... If I wasnt waiting for someone I'd be making one right now... does it work under load ok? (thinking of my motorbike?)
Just pop a couple of pan scourers in the jar... if you stop the big bubbles/splashes you should be ok? Failing that an inline water trap (empty jar linke your reactor ;)
waterboost 3 years ago
Hi! If I were you, I would start with a small engine, not on a big project. I'm still on a learning stage right now, just like you. I'm sure that the engine will take a load. But I'm not 100% satisfied with the result I'm getting with this system. It you be better for you to start with a stationary engine like a generator. It still needs a lot of tweaking. Yes an anti splash in the bubbler will definitely a big improvement.
ELManlinos 3 years ago