I want to do all this with my AA mini mag,I already have the led upgrade. I have found a glass breaking cap, but I CANT find a bezel ANY WERE. Does any one know were I could get a bezel for it?
The Maglite is an excellent flashlight for the price, adding the parts indicated would cost far more than the flaslight, any one part.
The Roar of the Pelican mod is about the upper end in cost effective mods but a 100% improvement can be gained by installing a Pelican bulb in a 4D for good light output, with the low wattage bulb there is nothing else that needs to be done, or 5D and one needs to change both the glass and reflector. Again, this is WITH the D cells, nothing exotic.
Went to his website and shipping is ridiculously expensive within the US. Fuckin 28 bucks shipping for the bezel? Are you kidding me? Man overpriced maglite items. 24 bucks for a mini mag? It cost 7 bucks at Walmart. LOL
The gasket is supposed to rest between the bezel and the glass, not glass and reflector (wrong side of glass in this video) And youre not supposed to touch the small lenses on the LEDs, since the fat in the fingerprints will burn in to the glass from the heat when lit. This will decrease the light output quite a bit... So dont du like this goym and everything will be just fine.
In fairness, he didn't remove the original glass so the exisiting gasket/ rubber washer should still be in place so would not affect the waterproofness as per the original manufactuer. Still he shouldn't have louched the Led lenses
I got a six cell mag I just bought a hi power five cell xenon bulb and extra hi power batt the beam now is immense.
nastymonsters2 3 months ago
I want to do all this with my AA mini mag,I already have the led upgrade. I have found a glass breaking cap, but I CANT find a bezel ANY WERE. Does any one know were I could get a bezel for it?
Thanks
LTP1996 6 months ago
I tried putting the gasket between the lens and bezel, but doesn't seem to seal completely. After this upgrade, is the maglite still water resistant?
teambloodshot 6 months ago
You must have a newer model of maglite to upgrade to this model.
How do you know if you have a newer model?
Go to terralux website and it shows you how to tell if your flashlight is the right one.
Good luck
palonejr 7 months ago
The Maglite is an excellent flashlight for the price, adding the parts indicated would cost far more than the flaslight, any one part.
The Roar of the Pelican mod is about the upper end in cost effective mods but a 100% improvement can be gained by installing a Pelican bulb in a 4D for good light output, with the low wattage bulb there is nothing else that needs to be done, or 5D and one needs to change both the glass and reflector. Again, this is WITH the D cells, nothing exotic.
Arabhacks 8 months ago
Now that is modding a M@glite. Could you possibly make an end cap with a blade in it? What other mods do you have?
gimmesomepotatosalad 1 year ago
i can understand upgrading the power but the "bezel" is just pointless
zacktman 1 year ago
@zacktman if you are a night security guard, it could be useful
newhuskytwenty 1 year ago
the website is closed for maintanence!!!! :(
Pyroboy771 1 year ago
faster
dithbmine1 1 year ago
why duz it take you like 7 minutes to show us how to somthing even a complete retard would take 30 seconds to know who to do just by looking at it
ninjadude126 1 year ago
Went to his website and shipping is ridiculously expensive within the US. Fuckin 28 bucks shipping for the bezel? Are you kidding me? Man overpriced maglite items. 24 bucks for a mini mag? It cost 7 bucks at Walmart. LOL
PROLlFIK 2 years ago
I just went to their website and it didn't have the TerraLUX TLE300M LED listed. Just lost a sale.
tganzrussell 2 years ago
@tganzrussell go to batteryjunction they got the new 3 mode 700 lumen one
xBADxB4NDITOx 1 year ago
whats the bezel for? and why is it ahped like that??
BenWahBalls44 2 years ago
It's a glass breaking bezel.
1974Alfa5Spd 2 years ago
To recharge you need to quit the bezel, and it is a waste of time.
bradri 2 years ago
Hubba Hubba!
IROCKID 2 years ago
what's the battery life on the upgrade compared to the standard?
urdufoo 2 years ago
This is video is rather long for what you show. It would also be nice to see the performance of the light in the dark.
rogerlew 3 years ago 4
READ THIS !!!
The gasket is supposed to rest between the bezel and the glass, not glass and reflector (wrong side of glass in this video) And youre not supposed to touch the small lenses on the LEDs, since the fat in the fingerprints will burn in to the glass from the heat when lit. This will decrease the light output quite a bit... So dont du like this goym and everything will be just fine.
Floskan 3 years ago 5
In fairness, he didn't remove the original glass so the exisiting gasket/ rubber washer should still be in place so would not affect the waterproofness as per the original manufactuer. Still he shouldn't have louched the Led lenses
Warhead3000 2 years ago
@Floskan Is putting the gasket between the bezel and glass only for this specific light/upgrade kit?
I know most lights I have from Fenix, 4sevens, etc. have it the other way around. Maybe this is why he did it like that?
martinaee 1 year ago