Mini buggy walkaround and startup, mini sandrail

[TheWillknagg]

Need to turn the idle down mate

[TheVTBROSEPH]

my shtf bugout vehicle...check



[corey15469]

ideled up aliitle too high?

[mudkid1234]

hay the chain drive system you have on the back what is it called i cant find it anywhere

[dixeydixey21]

hi what size box section did you use for the frame??

[thegreatbaker1]

sell it 1000 i live in maine

[dirtshower250]

ide turn the idle down just a bit

[groutaone]

Looks really well made, I like it

[tijman1]

Hi, im planning a buggy bulid, those urs have reverse ?, I read some people use a car motor starter as electric reverse thx great channel keeep it up, greeatings from mexico

[mowerking1]

Did you build it from plans"

[andygustafson1]

@mowerking1 No

[chick99936]

how much is one of these

[subtotal17]

kinda high set idle??? 2 or 4 stroke?

[jesuschristlovesus95]

tune it down alittle 

[pretzel1253]

doesnt look like it has a differential, if it doesnt hows the wear on the tires on the road?

[andygustafson1]

@pretzel1253 No diff, live axle. I don't drive it on the road unless for testing stuff out. You can hear the wheels chirp on turns but with the little bit of road driving i do, there's no real wear.

[Ravinrichard]

sounds like a subaru a wee bit lol

[crf150rb100]

are you willing to sell it? if so how much

[piniakolada2]

weight?

[lowwgan123]

Looks like a nice calm road to open the fucker up on



[MrJSU2010]

TIGHT

[TheAsh1197]

SHIT now thats what up call a ride

[rcarthridge]

I would make love to that thing! bad ass.

[coolnitrogut21]

this buggy is flipping amazing!!!!!!! but i dont think i would want to look between my legs to see the gauges :)

[PianistRudy]

Where can i learn to build one ? 

[corvettecraver]

Sweet! What is the top speed?

[shawndongsilver]

what about the driveline cvs and drive carage off a fourwheeler? i doudt u designed it by ur discription of part hunting..

[batmanbeyond400]

lol you have my four wheeler tired xD

[shawndongsilver]

hmmm i think modifieing the desert cart is the smartest idea i very easly could design my own havein built carts b4 an built my sas dakota! but i want to do it over winter wered u get the bearing and hub mounts?

[andygustafson1]

@shawndongsilver Hubs along with pretty much everything were made from scratch, bearings were sources from a standard bearing supplier.

[shawndongsilver]

if u designed it y is it identical to theres? wered u get the cvs and fox shocks?

[shawndongsilver]

man ive bin dreamin about makin

one of thos for a long time did u get the frame online or design it? thats my prob i think it be cheaper an quicker to buy the frame? an i got a 99' 750 ninja engine just woundetin if is too much snap for the 930 cv's? desertkarts??

[andygustafson1]

@shawndongsilver I designed it. I would stay away from desert karts unless you make some major modifications.

[TheGameguy007]

where did you get these plans from

[iceskull11]

How must did it cost to build?

[csecneo0115]

Could you send me drawing of this buggy?

[troydeedoidy]

oh dang dude you live in sj? itd be sick to banshee around hollister or metcalf in that thing....

[andygustafson1]

@troydeedoidy Too big for those places. Maybe the hollister 4x4 park but I think you have to stay under 15mph.

[evinsteven13]

I was gonna put a honda cbr600 f4i engine on my riding mower, and make a drag mower, but the only problem is that the engine I was going to get was total crap, needed rings, wiring harness, headers, coils, and a bunch of other crap, too bad, I like your buggy though

[dinger3265]

How did you set up that differential? Is it a take off from something else?

[andygustafson1]

@dinger3265 No differential, just a live axle.

[unknowsniper14]

is it for sale

[ArTzxDc]

Do you think i could make something like this from a 110cc engine from my old pitbike?

[ailll1]

How much did you spend total to build it from scratch?

[C3NT124LxT1M3]

IT LOOKS SEXY!

[TheBanannaPhone]

thats. fucken. awesome



[richardarichter123]

sweet buggy 

[skootb2]

@andygustafson1 where or how can i get one of those axles? & what are they called?

[galaxie63punk]

bad ass

[jessehummer]

dude i wrote u about a year ago, i need some plans,could you help me...how did you do to build yours?? jessehummer@hotmail.com

[DJraprider]

that thing looks sweet, very nice

[stevenstrebor]

U did a great job on building it!!

[maZZiveAttack]

Why aren't we allowed to drive around in these? I'd much rather that than a motorbike or a 4-seater car when it's only me driving!

[TheHondamxer143]

how much does it cost to build one

[corvette2010ify]

would you sell it?

[corvette2010ify]

hey nice job could you send me the plan for it i would like to know how to make one thanks and how much did it cost you to make

[lildeke99]

is he selling that

[O7ROADKING]

THAT THING IS SWEET any way of making it 4x4 she would be unstoppable nice job on the build

[00paTT92]

if you had some spare time and i had some extra cash how much would it cost for you to build something like this?

[br1114]

im building a front wheel drive buggy with a 1.8 diesel engine from a ford fiesta

it is going to have 2 seats

im just cutting the steering, engine and sespenction out of it and then building a metal frame for it

sos for bad spelling.

[VirtualReality13]

What size steel did you use-pls reply cos I need to know asap

Cheers

[Nitro7920]

Where did you get the drive shafts?

[VirtualReality13]

What size steel did you use-pls reply cos I need to know asap

Cheers

[sdk2119]

Can u list all the item u use to build this. Plz and ty.

[cacneaunit6]

if you built this, how did you connect the engine to the wheels and make the brakes and make it steer and if i was making a go kart would it be important to be able to shift gears and also (yes there's more) how would you sift gear and how helpful would it be? thanks

[MrBurnTec]

what engine does t have :)

[MrJawesome1]

sounds supercharged, lol

[SuperQuadfreak]

I love it :)

do you really build this vehicle alone

without an plan that you have bought?

[petrolhead523]

how the hell is it mini its bloody massive

[crazyman17429]

How much was the approximate build cost?

[insanegokartguys]

hi me again never mind umm how did u build that starter with all the switches could you pleas make a video i would like to do tht thanks

[sschoon86]

How much travel does it have? Are you using 930 CVs amd have you had any problems with them?

[boreddism]

how much was the approximate build cost?

[iwepic]

Hello. I'm extremly interested i building a mini buggy and any help or tips would be greatly appericiated. You can email me at kb88@roadrunner(dot)com. Also, how much did this build cost total. Thanks in advance.

[heatedhonda1]

how fast is it?

[andygustafson1]

@heatedhonda1 Not exactly sure, only went up to 4th gear going about 60. probably 80ish which is plenty fast for me

[paperNATEman]

wheres the seat for your girlfriend?

[andygustafson1]

@paperNATEman Ha, I'll be building a 2 seat busa one of these days...

[heatedhonda1]

@paperNATEman haha lol

[ceniorP]

ohmfygod

i want to biult one of those

Can you help me with the plans?

and how much ?

in spannish preference plis :(

[bmxguy73]

i think it would look alot better with a backwing

[MrAce17100]

what does it run on?

[alemarquezini]

you sell the project?

 how?

[01Yamaha660]

how much travel in the rear and how much in the front?

thanks

[buggydude3]

thanks, do you mind telling me how much they were? im building a 2 seater with a cbr 600 engine. but i think im gona have to have coilovers. but do you think it will work with just the air shocks?

[andygustafson1]

@buggydude3 It depends on the type of driving you are going to do but you could probably use 2.0 air shocks on anything up to about 1100 lbs. Anything over that you might want to switch to coilovers.

[buggydude3]

did you use fox shocks?

[andygustafson1]

@buggydude3  Yes, fox 2.0 air shocks all the way around.

[jhytorc]

nice build, the only thing i see that i dont like is the rear swingarms, no vertical strength, and no lateral support, entirely too dependent on the axles, and having the swingarms flex like that is very difficult to get right, my guess is it wont take long to destroy the uni-joints and bearings.

[andygustafson1]

@jhytorc Thanks for the tips

[nomainreason]

I want one sooo bad.. Where do you live?

[Wolfshamil]

very nice build and im impressed man!

[todaima]

hey man.. how have u designed those suspensions? im from brazil and im searching for it for a long time.. tank you bro..

[rileyrileyrileyz]

that thing is fucking sick!

[11green11]

too bad its only a single seater xD

[my1987toyota]

WOW that is a nice sand rail

[sdk2119]

nice buggy how did u build and was material do u need.

[sdk2119]

nice buggy how did u build and was material do u need

[gump54]

very nice build and im impressed man!

[12340bmx]

Ok So A Quick Question for Ya. When Yuh Mounted The CBR Motor How DId You Get Independent SUSpenion In The rear with a chain driven motor i always thought you would have had to have a drive line.

[fox10169]

is it up for sale?

[Landotter1]

Boy, that sure is a slick machine... Where did you get the transaxles in the back?

[shorty9754]

did u buy that, if so where

[netwt42oz]

@shorty9754

read the video description! he built it READ READ READ

[respecial1]

I was looking at your build photots on a buggie forum and saw a photo of a splined shaft and some female splined couplings, ice looked all over for a splined shaft please tell me where got them and how much they cost.. Thanks

[bjm6469]

what engine is she running?

[nitromaniac89]

how did you get the drive shafts

[paulius360]

badass

[21492005973494]

looks cool

[iceskull11]

what buggy is that?

[iceskull11]

what is with the 2nd switch @33.

[andygustafson1]

@iceskull11 lights

[SKitles888]

daam

fuck yea

thats like the odysseys grand dadeh

[smartparts90210]

hey could you make a video closer up to the suspension i need some ideas how to build the independent rear suspension

[andygustafson1]

@smartparts90210 I have some better videos that show it closer up

[arpyka1]

soo cool

[arpyka1]

cool



[1969fordman]

hey do you think using motorcycle front forks would work for shocks tho... it sounds like a good idea

[firmclock]

the idl needs turnd down

[race122712]

What is the motor on this beast?

[mower26]

how long did it take you?

[ratbag1944]

how much would u sell that for?

[aisanpersuasian69]

Shit sounds like its got a procharger

[karlm121]

Looks something similar to the Edge Barracuda. Nice job there. I'm determined to build one myself. But I have a garage to build first

[mromidget]

what r the sizes of the front and back shocks

[srgm123]

where did you get rear drive lines/axles from?

[gringo406]

hey man, i love your buggy i have a dazon 2 seater and i want to put a 600 or 700 motor into it. can u make a video about how u made your motor mounts and how u made it works thanks a lot

[soney646ilp]

holly shit ! that thing looks like ittl fly! but the idel is like 2500 rpm lol

[gringo406]

is it me or the motor sounds like its too accelerated?

[andygustafson1]

@gringo406 That was a quick fix, runs fine now.

[pickalock865]

@gringo406 you mean idleing to high

[imontopoftheworld]

HOLY SHIT

[rapidrory]

do those shocks happen to be motorbike front forks?

[andygustafson1]

@rapidrory no, fox 2.0 air shocks. You can find them on ebay.

[mromidget]

@andygustafson1 What size of shocks are the?

[lionelvillahermosa]

''excellent''

[deagalo69]

would you be able to send me your plans i have been trying to build my own but i suck at design but am great at building stuff

[andygustafson1]

@deagalo69 Dont have plans, sorry.

[punk531]

@andygustafson1 what did you use for a trans axle?

[armani9300]

@deagalo69 Hi,

You would get s plans on eBay for $60 or $70

Thanks

[tylerlevesque75]

thats one of the sickest buggys on here i awesome job at making it so compact

[andygustafson1]

thanks,

[MrMecrob1]

Did you design it yourself? Or what plans did you use to make it? I am very interested because you have one of the best looking buggys ive seen on youtube

[andygustafson1]

Thanks, designed it myself.

[jessehummer]

can u take pics of it :S please, i would like to build one almost like urs. .... wrote u a message

[mrcherry4]

why is it idling so fast/

[andygustafson1]

@mrcherry4 I had to adjust the idle; it's all good now.

[jwerner0124]

nice job man. Hey i need help with the drive line. how did you do it?

[Pooonschka]

What is the width?

Also, I love this buggy.

[comacazyjp1]

hey could you please send me the design plans for you go kart please thanks messeage me back

[alienjoe123]

looks like a psycho fl350

[buggys4life]

hello that is mad

do you have plans for it if i could get aeven buy them copy of them that would be grate i would

[93intrepid]

Looks great! Any time a build works out its a good day. Check out my mini rail.

[bdkxkid]

4wd???

[conkinator2]

Hey Andy what size tubing did you use and was it chromoly or regular tubing

[andygustafson1]

1" DOM with some 1.25" DOM and square 1" tubing on the bottom parts. Looking back at it I should have done it all at least 1.25 and might redo it at some point.

[wayne543210]

nice man looks bloody brilliant

[lilwaynethebest123]

i crashed mine lol look at my vids there is one called mini buggy thats the one i crashed

[perterbuilt13]

nice job man

[Lahti420]

was there plans for this or did you design it yourself?

[andygustafson1]

no plans, just went at it myself.

[XXRichieXXrichXX]

@andygustafson1 can you draw me up some plans

[andygustafson1]

no plans sorry but i can help you with whatever specific questions you might have

[XXRichieXXrichXX]

@andygustafson1 where did you get the parts from such as the rear swing arm rear end and front rack opinion A arms and shocks

[andygustafson1]

Fox 2.0 air shocks you can get on ebay, same with rack and pinion and heim joints. Made everything on the trailing arms and a-arms from scratch.

[XXRichieXXrichXX]

thanks for the help what motor do you have in it i have an gsxr 600 im wanting to build one around

[matthewmarrs123]

i wanna know exactly how you did this because i wanna make one like this....

[matthewmarrs123]

where do you get the shocks.