ShapeShifter: Pede 4x4 As... Rustler 4x4

[blowenfuse]

Hey Jang how did you get it to sit so low?

[fgaff14]

my friend made a car from a slash, stampede, and a rustler. it is really cool

[deathpenguin42]

sir you need to get yourself some weights.

[Traxxasboss32]

Thanks TraxxasAllOut

U the boss now haha

[Traxxasboss32]

My friend told me 2s lipo is better choice than all lipos concerned which is better 2s lipo or 3s lipo?

[TraxxasAllOut]

@Traxxasboss32 3s lipos are faster. 2s lipos are slower. 3s are genrally better.

[lasse2071]

Is it possible to extend a stampede 4x4, by using a slash 4x4 chassis and driveshaft?

[T4nm4y]

Or send me an old one :P

[T4nm4y]

WOW! Modify me an RC Please! :P

[TheJack387]

You should make a touring car or a drift car that would be amazing

[funnyassrandomvids]

how fast

[tatertot700]

lol the stock chassis remains unmolested good one

[mitchalar]

what is the top speed

[jason1786]

is this truck can go faster then 70 mph? like the rustler RWD

[Idontreallycare80]

@jason1786 With this powerplant, who knows? The stampede 4x4 platform shouldn't really go any faster than 50 MPH, though. With the speed gearing you can do 60, but all you'll be doing is speed runs.

[jason1786]

@Idontreallycare80 but i thinked about it more then twince, because the new xo 1 can do probably easy 60-80 mps on city street , but some rusltler can do 2wd can do 80 mps too, is its 4x4 its more traction, and all, so i think with some mods it can do 80 mph too

[baconator127]

now watch, tomorrow traxxas will  announce a rustler 4x4 :/

[jason1786]

@baconator127 i wish,

[axelsfolks]

Nice, rustler 4x4+4....LOL

I think this is the next truck...with 4x RPM revolver front rims, and 4x Gladiators, and I'll have to try and look up how you did the truggy/Stadium Truck bodies... Will something like a slash 4x4 rear bumper work to replace the wheelie bar for jumping/bashing?

Thanks so much for what you've done for the hobby, looking forward to airplane reviews...

[Straightsix76]

It's about time Traxxas built a 4x4 jato

[7777dmith7777]

For christ sake put some lead in the front end..

[supersweetjae]

hey jang i'm putting dual vxl in my erevo (along with hardened drivetrain and rpm parts) i was wondering if you knew any one who had done this and what sort of side effects there would be :) thanks.

p.s i'm trying to tune the suspension like a summit any suggestions?

[TTibble]

This project is total overkill.......I LOVE IT

[TheRclightning]

it sounds like a v-tec at 1:27

[deejakway]

@TheRclightning this has more power ;)

[dondon4720]

need to make a drift car next



[deathsparrow16]

very good

[petervelker1990]

that is a very cool rc car and concept, i was wondering, have you ever thought of making mattracks for a 1/10 scale rc monster truck?, thanks in advance.

[jamesspeed70]

What a nice design that Rustler.. I would like it if Traxxas will build it just like that..

[erevofreak96]

and traxxas dosent make this why???

[Bobbystilz43]

You must be on a high traction track because i can not get mine to hook up with Anaconda's. I am running a Duratrax Element by Castle 3900kv motor esc combo. Team orion 2s rocket pack and 14 tooth pinion stock spur. Which is less torque so I am not sure why it will not hook up. I put on some Bowties and it hooks fine. Shocks are stock with out any spacers in them. Diffs are stock fluid as well. I feel I wasted $40 on anaconda's. Any ideas?

[ferndogg310]

Handles well for all that powerful.

[bradykhuber]

i am going to do this for dirt racing setup

[johnedwardthomas]

how fast did it go?

[BashMonkeyRC]

why is it Project Shapeshifter's all about the pede 4x4?

[GtGills]

Jang my hobby shop guy keeps telling me if i put a 3s in my stampede 4x4 he says i will blow out my back diff again and again so has your diff had any trubble

[LBPBUILDER]

hello jang first i would like to say i love and appreciate your videos second i was wanting to do this as a project would you call this a project also would this work if i got a stampede 4x4 and put on a rustler body, wheels, tires, drivetrain, and a arms and swapped out the stock motor for a 1/8 tacon 4074 would i need to do any thing else please answer back at dodge70charger@ymail.com if you have any advice please tell and i need a new engine for my 1/10 nitro rustler for cheap any ideas

[LBPBUILDER]

hello jang first i would like to say i love and appreciate your videos second i was wanting to do this as a project would you call this a project also would this work if i got a stampede 4x4 and put on a rustler body, wheels, tires, drivetrain, and a arms and swapped out the stock motor for a 1/8 tacon 4074 would i need to do any thing else please answer back at dodge70charger@ymail.com if you have any advice please tell and i need a new engine for my 1/10 nitro rustler for cheap any sugestions

[pluebin]

That looks like the motor off of the XTM rail.

[howtomagicguy]

is their anyway to mod the chassi to make a 7 cell flat fit. please help!!

[Bastelkiste1]

@howtomagicguy there is no mod necessary to make a 7 cell (NiMh) fit flat in the Stampede 4X4, Slash 4X4 and Slash 2wd, maybe Stampede 2wd too. If you want to put in this batterie in an normal rustler you have to mod the chassie, or buying a flm aluminium chassi

[UltimateRCnetwork]

@Bastelkiste1 That's incorrect. The Stampede 4x4 battery tray is long enough to fit a 6-cell only. You have to hack up the chassis pretty badly to fit a flat 7. Only a pack with the #7 hump right in the center, lengthwise, will fit, with the hump protruding through the middle of the hold-down strap.

[Bastelkiste1]

@UltimateRCnetwork OK well nobody is perfekt

[scubareece]

omg the new shape is a crawler. *facepalm*

[scorpionrtc]

I'm thinking of stampede as sand slasher. yes off road sand truck. mamba monster custom fit. twin 3s lipo, swap to street tires and you will have a speed demon.

[rcpilot451]

sounds like ths slipper is really loose in this video? or is it just the motor?

[PrownToOwn]

Just wonderin but wuld be the best waterproof brushless setup for the rusty

[lilddesignsrc]

i cant even get my slash with a castle 4 pole 5700kv motor to run on 3s i blow out mip cvd kits like it nothin

[YoShaquaan]

i just finally got this same 4s lipo today and i f***ked up 1 cvd, a spur gear, and blew out a shock. it was fun, but was it worth it? HELL YA

[scubareece]

not related to the project, but it would be cool to take a 1:16 chassis and make a 1:16 pede

[13rcdude]

cool

[GrandEpicenter]

Too Cool, Great video.

[NikkoCharger]

Whats the point of it being 4x4 if the front wheels never touch the ground?

[purplewolfpimp]

Dam you Jang. I was going to do the samething. lol you read my mine. Cause i like my rustler . Just need a 4wd version.

[burnout616]

I completely missed this video when it came out. omg!

[rccarsrule1000]

"i left the stock chases unmulested" wft!!

[rccarsrule1000]

dang i was planing on doing that but an offroad version

[nutjones]

cool jang! i like

[martinrc1996]

this is what i have been waiting for Traxxas to make..... and you made it perfektly! hope Traxxas sees this video.

[83PoWeRrAm]

cool

[vsci79]

new concept... ' just leap the front stretch' power

[draven3907]

nice!!

[shawnsk867]

this one is my fav by far !!

[WhiteLightning1220]

next thing we know, traxxas sees this video and makes the Official Rustler 4x4.

[macksara29]

@WhiteLightning1220 Hope they don't make it from a 1/16th e-revo chassis

[Leprechaun79]

@macksara29 Oh you know traxxas...they will.

[FRYEGUY247]

BANDIT 4X4 WITH THE BANDIT TIRES ALLTHE WAY AROUND

[YAGO323]

should have done a speed run.

[RCD3vil]

i really wish you had jumped it once just to see how many backflips it would have done. or if you had taken off the wheelie bar and done some standing backflips

[wirgej38]

SICK!

[traxfan32]

better get some steel axles! lol im breaking them on 2s

[seth556]

That driver on the track was actually doing a very good job with it, I was very surprised to see it being controlled so well. Anddd unlike a regular Rustler, it wasn't horrible around the corners.

[noon1411]

Love it jang. Very creative. Look very slick.

[itsallwood]

kind of a buckin bronco isnt it?

[polarisfreak04]

Out of control...

[mustangmadmatt]

im doing this :)

[scomyo3]

WOW that is insane i love it

[SCHMULBACH22]

jang, did you try to put weight in the front of the car?

[gruzergrub5000]

im sure if traxxas came out with a rustler 4x4 this is what itd most likely be, surprised i havent seen this already, but then again i havent kept up with any of the rc forums i would normally visit lol. id love to pick up a pede 4x4 roller and try this out though.

[OrangePHX]

I bet it's gonna be turned into an On-Road Car. lol

[PROJ3KTJ30]

dam i thought i would never see it. a rustler 4x4!!!! but how good is it offroad?

[DeOliveira78]

Awesome Jang.

So my Metamorphosis build turns out to be an extension to a couple of your Shapes.

Extended wheel base of the Stampede 4x4 on the FLM EXT Rustler chassis and is aiming to be a truggy wheel/tyre setup with ProLine Bulldog RC8 body for bashing and the wheels/tyre setup you used in the original backslash build for racing. Thanks for the inspiration that has led to me enjoying mod'ing over building a pre-designed kit. Cheers! Aljo.

[sensi023]

Bad ass Jang. Now (fingers crossed) please tell me you took that thing out to one of those buttery smooth skateparks y'all have on the west coast......

[tulliobestia]

Wauuuuuuuuuuuu !!!!!!!! thumbs up jang !!!

[AllWheelz47]

Traxxas should really mzake that! i would sooooooooo buy it!

[MattLoaf92]

Holy torque 0.o

[gabster118]

"remains unmolested"...HAHAHA

[idrummerboy13]

cool

[UltimateRCnetwork]

See the full project page at UltimateRC or Ultimate Traxxas!

[Bangbangboom51]

@UltimateRCnetwork how does the transmission holds up to that 4S POWAH?!?!?!? Must have melted all the gears already??