Good video. I don't have a vice so I used an old crank arm I had lying around. It made working with the bearings much easier to have the pedal arm standing upright. Lots of good, clean grease helps hold bearings in place. Used a small screwdriver to move them into place set in to where they are supposed to be.
Worse comes to worse, you can buy a new pair for $50 US.
But I did it and I have poor vision and fat fingers.
Good video. I don't have a vice so I used an old crank arm I had lying around. It made working with the bearings much easier to have the pedal arm standing upright. Lots of good, clean grease helps hold bearings in place. Used a small screwdriver to move them into place set in to where they are supposed to be.
Worse comes to worse, you can buy a new pair for $50 US.
But I did it and I have poor vision and fat fingers.
Thanks again for the vid.
jacknolan62 7 months ago
Why would you take advice from a guy who damages the pedal before he's even started.
azizukman 10 months ago
@azizukman Don't be so hard on him. Breaking stuff is how you learn sometimes, and he has learned from the experience to boot!
aml4yt 6 months ago
excellent!! Thanks.
This instructions are valid for M540 Shimano too.
trapalh0ne 1 year ago
very good video!
congratulations!
rickenergia 1 year ago