V6-GT Review and Unboxing

[trashypickles]

this heatsink makes my dick look small

[Myunnamed]

haf 912 support?! Thanks.

[Georgefromboarding]

Could you please do a quick review or overview of that Asrock Fata1ity board?

By the way, great vids!

~George

[GridCrash1]

Ok Here is a question that I have not read or seen reviews about so I will just ask

My Case Is The Antec DF-85 Would The V6 GT Block One Of My Block One Of My Memory Slots On My Asus Maximus III Formula MotherBorad? The Memory I am Using is the CORSAIR Vengeance 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Or Should I Get The Zalman CNPS11X Extreme!

[LavcoPriceTech]

@GridCrash1 if its the tall ram it will block it, but they do make shorter vengeance

-Price

[Fear58000]

t pas obliger de balancé les boite !!! ohhhh c beau bam !!! crétin !!!

[BludSworn]

That's a lot of paste it's only suppose to be a grain of rice! Less is more :)

[LavcoPriceTech]

@BludSworn Yes =]

-Lavco

[Super01041994]

what an ugly haircut bro :) i could not resist to tell that...........oh and by the way good review and speech,a little big for my needs and computer

[LavcoPriceTech]

@Super01041994 thanks

-Price

[kevgr5]

you are one of the only guys i have seen use a static bracelet that know what they are doing , but if i had one i would use it to!

[LavcoPriceTech]

@kevgr5 thanks

-Price

[TheElectroT]

wich is better? this one or the thermaltake frio?

[LavcoPriceTech]

@TheElectroT This ever so slightly

-Lavco

[drreik]

does the v6 gt thermal paste that come with this product worth or should i buy better one . i will have the i72600k cpu but clocked at 4.0 gh . i dont want to risk it .

[LavcoPriceTech]

@drreik the paste that comes with it is good

-Price

[ALPHA2258G33Z3R]

I was just thinking. You could use a Dremel tool to grind those nipples down maybe 1/32" and then mount the cooler. It's the height of those nipples that causes the damn thing to mount so loosely.

[ALPHA2258G33Z3R]

I think that if you turn those two center plates upside down, so that the little nipple points down instead of up, you can get the cooler mounted tight enough so as not to wiggle. I tried, but couldn't quite get the bolt started on the second side, because I was working alone and not strong enough to squeeze the bracket down with the fingers of just one hand. Two people working together could do it. Anyway, mine wiggles, and I'm pissed. Did put the thermal paste on like you did.

[ALPHA2258G33Z3R]

I think that if you turn those two center plates upside down, so that the little nipple points down instead of up, you can get the cooler mounted tight enough so as not to wiggle. I tried, but couldn't quite get the bolt started on the second side, because I was working alone and not strong enough to squeeze the bracket down with the fingers of just one hand. Two people working together could do it. Anyway, mine wiggles, and I'm pissed. Did put the thermal paste on like you did.

[Jackal40k]

Are you high? You look high. If you're high in all your reviews I forgive you and take back my previous comment because then you have an excuse for looking like a retard. Otherwise you suck bigfoots dick.

[LavcoPriceTech]

@Jackal40k how about neither?

-Price

[Jackal40k]

Ok seen a few of your reviews now. You're absolutely terrible. You look retarded. You smile way way way too much. Get a haircut and get a real job kid. Leave the reviews to adults who know what they're doing and go back to playing COD please. Thanks

[FaldorixAlpha]

@hrbear actually you dont need to cover the entire cpu, just the die itself which is in the center. the die size varies cpu to cpu, but in general, if you split the cpu into a 3x3 grid, the center square of that grid isnt much smaller than the die itself

[hrbear]

I'm stuck on Noctua coolers anyway :) I disagree with your method of placing the thermal paste. This way, the paste is compressed and propagated on the CPU's surface, but you don't know if the square was totally covered with paste or not. You may missed the edges, or if the paste quantity is more than enough, you may had a paste overflow at the edge. I prefer the classic finger applying method :-P

[LavcoPriceTech]

@hrbear there is a video on youtube that show the dot method is the best

-Price

[marcoiwb]

Can you tell me if the V6GT gonna fit in Thermaltake V9 Black edition case?? with the lateral cooler? Appreciate man!

[TheJaykaybay]

You look exactly like me.

[LavcoPriceTech]

@TheJaykaybay pics or it didnt happen. lol but really?

-Lavco

[TheJaykaybay]

@LavcoPriceTech Yes lol

[LavcoPriceTech]

@TheJaykaybay nice

-Price

[nymxcar]

What's a good case for this to fit?

[LavcoPriceTech]

@nymxcar almost any case on the market

-Price

[XenonCAE]

dude u need to turn off the power saving

[ryanvhockey]

Does the cooler come with that thermal paste? If not, what past are you using?

[LavcoPriceTech]

@ryanvhockey it does come with thermal paste, I think we used zerotherm

-Price

[TheGuessWhatTech]

What was theat thing he applied to screw on the retension bracket at 6:09

[LavcoPriceTech]

@TheGuessWhatTech its the socket screwdriver adapter that coolermaster includes with the V6

-Price

[medemer1976]

Hi LavcoPriceTech, Could you able to do Unboxing and Reviews on Corsair H100 CPU Cooler? Thanks.....

[LavcoPriceTech]

@medemer1976 we have

-Price

[medemer1976]

@LavcoPriceTech Thank you very much for the unboxing and review. By the way, I have already purchased Noctua NH-D14 as per as your CPU cooler recommendations and it works and performs great for my PhenomII X6 1090T CPU.

[Computerlover1994]

@LavcoPriceTech what was the temp in the room you tested the v6 in ??

[LavcoPriceTech]

@Computerlover1994 probably fairly cool, don't remember, too long ago

-Price

[Computerlover1994]

@LavcoPriceTech thanks for the quick reply

[LavcoPriceTech]

@Computerlover1994 no problem

-Price

[MEDOESKI]

To much noise get Noctua

[LavcoPriceTech]

@MEDOESKI we did

-Price

[L45V3G45]

i stopped watching at 4:21 - YOU are a fucking idiot, d00d.

[LavcoPriceTech]

@L45V3G45 cool story bro

-Price

[SickWickedClown]

OK THANKS THAT'S WHAT I THOUGHT SO I BOUGHT THE V8 MODEL INSTEAD KEEP UP THE GOOD REVIEWS PUFF PUFF PASS ~SWC~

[SickWickedClown]

HEY ? 4 U I WAS GOING TO BUY SAME SET UP MOBO SANDY AND COOLER BUT WANTED TO GO WITH 16GBs OF RAM 4X4 WILL THEY ALL NOT FIT WITH THE COOLER NEED TO KNOW BEFORE I BUY COOLER THANKS ~SWC~

[LavcoPriceTech]

@SickWickedClown No it will not. The ram is too tall.

-Lavco

[asus3571]

what tim did u use and method

[PirateKing1256]

Wow you're one CUTE guy.

[LavcoPriceTech]

@PirateKing1256 Thank you =D

-Lavco

[lord2468vader22]

Do u have to war that yello crappy thing when u make your Computer

[LavcoPriceTech]

@lord2468vader22 It is just a precaution. I dont wanna fry my board or anything else

[lord2468vader22]

@LavcoPriceTech srs thx ima suscribe ur vids are fun to watch but you utube dosent work so i have to watch your vids of your channel

[maitaufu]

how the v6gt noise??is that loud??

[LavcoPriceTech]

@maitaufu Its not so loud when you have the case side on. Personally I dont think its loud at all

[MasterNaruto1214]

How good is the Hyper 212+ vs this V6?

[ldavidtw2000]

I kept trying to find the vid where it fits in the x58 boards where there's 6 slots of RAM. I got those high profile RAMs from G.skill and I got 6 of them. I'm worried if the fan will block the RAM?

[LavcoPriceTech]

@ldavidtw2000 Yeah your going to run into problems............ Sorry. My V6 barely didnt hit my ram and I only had 3 dimms =/

[naka538]

Way too much paste

[LavcoPriceTech]

@naka538 no way, proper application according to temps

[KillaDoor89]

Hey Guys, Whats the name of that cooler to the right at 7:32. Ive been looking for a nice looking green cooler for my haf x nvidia.

[LavcoPriceTech]

@KillaDoor89 Its a Prolimatech Megahalems with green fans on it lol

[KillaDoor89]

@LavcoPriceTech Damnit, do you think i should get the thermaltake jing?

[LavcoPriceTech]

@KillaDoor89 No we are pretty sure its bad its smaller and way less CFM"s" then the frio =]

[KillaDoor89]

@LavcoPriceTech Well have you had any experiance with the Zalman cnps9900nt? its the only other green cooler i can find.

[LavcoPriceTech]

@KillaDoor89 In the past Zalman coolers arent so great...............

[KillaDoor89]

@LavcoPriceTech i think ill give up on getting a green cooler, and just get a good, basic white or black colored one.

[TechMatt7]

Haha, nice video guys, I was like checking your channel everyday and you didn't upload a video until now, love your vids, btw, try Arctic MX3 should give you abt 1-3 degrees better than zerotherm trust me :)

[LavcoPriceTech]

@TechMatt7 Ha thank you that means alot to us!!

Oh and we got that NZXT case you asked for!! Review will be up shortly.

And we will be doing a fatty review on thermal compound

[TechMatt7]

@LavcoPriceTech Haha, its cool man, I love how you give your HONEST opinion on stuff since that can actaully help us decide what to buy, but yeah I love your reviews :) (see how I bolded that HONEST there?)

[LavcoPriceTech]

@TechMatt7 Haha thank you thats cool

[TechMatt7]

@LavcoPriceTech Oh and btw if you want to get into custom watercooling really cheap, check out the XSPC Rasa 750 kit, it comes in a 120, 240, and 360 rad kit. It's freekin' cheap! The 240 rad kit only costs 129$ and includes everything you need for a CPU loop (a waterblock, a dual-bay reservoir and pump, and the rad and fittings, tubing and all the kool stuff) It gave me like a 10-15 degree drop from my old and sucky H50! Oh check performance pcs and jab tech for prices :)

[LavcoPriceTech]

@TechMatt7 Hmmmm I quite like it. Muhahaha we will look at that

[TechMatt7]

@LavcoPriceTech Are you uploading the NZXT m59 case review now? btw, we should chat sometime, you guys seem like EXTREMELY COOL ppl to talk to. you guys have any aim or skype or anythin? oh btw, is that a HAF 932 side panel i see? :o

[MrRageaholic1]

7:17 You have C1E on.

[LavcoPriceTech]

@MrRageaholic1 This is the varying multiplier?

[MrRageaholic1]

@LavcoPriceTech Yes, I have it off my AMD x6 rig and it helps temps on idle and i think helps power consumption. but you can turn it off if you wanted.

[LavcoPriceTech]

@MrRageaholic1 When i turned it off just now the varying multiplier was still active. So weird..............

[MrRageaholic1]

@LavcoPriceTech SpeedStep is on to, That is making the multiplyer dropping to keep it low temps. I think it's called Cool 'n' Quiet on AMD boards.

[evilhugbear]

I like your videos the best out of all the other pc-type channels :D

[LavcoPriceTech]

@evilhugbear Thank you so much!! That means alot to us!!

Thank you for watching!!