@MCDEVVOMAN Mix in some White Phosphorus and some sulfur. Note: Do the sulfer last and be VERY careful with it after the sulfur is mixed in as it can be EXTREMELY friction sensitive after this.
castings from power tools such as old chainsaws and porter cable wood saws are magnesium...to test just scrape off paint and pour on some vinegar......wait a few seconds....if it foams up its magnesium.... :D
Even better idea (YOu get about 40 matches least of 30) cut of 20 match heads crush them so you have a somewhat grainy or dust like powder and there you go =)
I tried to light my potassium nitrate, and it is spectricide stump remover, and it wont flare up, even when i mixed it with the same exact magnesium bar. Can someone tell me what im doing wrong please?
@wowmodblake you need to ball mill the kn03 you get for about 2-3 hours, till it turns a silverish color if using lead tumblers. I ballmill my kn03 for about 12 hours, with outstanding results. no MG for me though.
@Ubojica6661 really, i would never have guessed flour. although there probably is some different natural chemicals in the wheat that might make it explosive
Good stuff but some constructive criticism... You should use aluminum powder (400+ mesh) it is way better and much easier to use (no sandpaper) instead of magnesium.
I know its prolly been said before, but make sure you wear proctective eyeglasses when you light this stuff. It is way brighter than the video and could damage your eyes. Friend of mine made some and looked right at it, left a nice redish orange mark in his vision for 5 minutes XD
I had no idea BaNO3 was in sparklers. I wish I had some. I wonder if you ground up the sparklers and removed the iron with a magnet then replaced it with some iron oxide, would it make a much more energetic reaction.
i thought also so. But it would be cool if you can make some experiments with the mg/kno3 powder for example with sulfuric acid and make a video of some properties of it :)
yea.. i actually dried some at 50* C in oven one day.. powdered it as much as i liked and put in a container.. i use that for detonations now.. btw idk if my an/mg is so extremely powerful because im so win at making it (lol) OR because its a little bit wet (magnesium reacting with water reaction?) ''flashpowder deflagration'' is my video called.. somebody flagged it for the real title -.- anyways.. theres iron, alumimiun, bano3 and starch in sparklers (: bano3 = REALLY powerful!!
soon its new year.. theyre selling TONNES of sparklers.. i do have a tutorial on how to get Ba(NO3)2 from them (: bad quality.. but i think its the only? q: btw.. ammonium nitrate.. i use 3:5 an/mg mine isnt all dry every time.. use by volume/parts.. not good for firecrackers.. dont let it stand somewhere.. for too long (; but youre going to do some flashpowder and such for now? q: but use ferrocerium/magnesium as a fuel and use 1:1 with kno3.. then its 2:1:1 kno3:ferrocerium/flint:magnesium
hey... you know ferrocerium or flint.. ferrocerium is in zippos.. the zippo flints.. mix magnesium and flint(or ferrocerium) 1:1 then use that with magnesium 1:1 btw i think you gotta use a finer sandpaper for your magnesium.. looks quite slow (: i use a firesteel.. rather wanted a magnesium bar.. but screw it! firesteel is AWESOME flashpowder fuel.. matchpowder/firesteel is really fast too.. 1:1 xD you could try other oxidizers too.. Ba(NO3)2 is VERY powerful with magnesium!!
I think i pooped my pants lol nice test haha
SuperThejammer 1 week ago
could you replace the magnesium with thermite?
sweeter48 2 weeks ago
oh i am so glad my uncle bought me that fire starter
MORTARS987 1 month ago
so can i get you to do a tutorial on how to make a really good one
xxnightrayvenxX 1 month ago
i was wondering will u do a tutorial on how to do a good ninja smoke screen bomb i really need one thanks
xxnightrayvenxX 2 months ago
@xxnightrayvenxX i know a way..
RedTigerAirsoft1 1 month ago
2 KNO3 + 5 Mg → K2O + N2 + 5 MgO
You should of followed the correct proportions of 2 mole KNO3 to 5 mole Mg
Pyrance 2 months ago
... making powdered magneisum by grinding it can cause it to catch fire with friction.. it burns + 900* C and will combust out and in your face btw
MrKolerful 2 months ago
@MrKolerful If you could make enough friction to make magnesium catch fire that way i would applaud you!
ThePyroKid454 4 weeks ago
The only thing he said in hole video was that was fucking amazing
Xxnate500 3 months ago
thanks i wil try and make some for myself
Ak47fu100 3 months ago
i can honestly say thats a pretty good fuse oh yeah and DAAAAYUM
THe808KiNGX 5 months ago
I have KCLO4 and othes stuff (In EU) labchemo@gmail.com
labchemo 6 months ago
can you use Barium Nitrate do to the fact that Potassium Nitrate is now illegal in the States
dylondragon 6 months ago
@dylondragon Yes, but it's toxic... Silver nitrate is good, but expensive...
MGoose66 4 months ago
@dylondragon Not illegal. Moron.
stupidgaga 2 months ago
how long does it take you to grind down the whole magnesium stick
oodimmock 6 months ago
why did it burn so slow : / it needs to be alot quicker to make a flash powder bomb
MCDEVVOMAN 7 months ago
@MCDEVVOMAN Mix in some White Phosphorus and some sulfur. Note: Do the sulfer last and be VERY careful with it after the sulfur is mixed in as it can be EXTREMELY friction sensitive after this.
stupidgaga 2 months ago
id give it five stars
if fucking youtube hadnt put in the thumbs up thing
so i hope a thumbs up will do
MrTheanimemaniac 7 months ago
are you ever going to make new videos?
spotlightman1234 7 months ago
will this work if I use visco fuse instead of an improvised fuse ?
Ralphgtx280 8 months ago in playlist Feux d artifice
can you use magnelium instead of magnesium and will it be bigger
lxshomeproductions 8 months ago
@superawsomeninjajizz i got stumo remover you dont need to be 18 at menards
khank1995bmx 8 months ago
@superawsomeninjajizz The potassium nitrate I got from Lowes. There's a stump remover they sell that's close to 100% potassium nitrate.
AmatureChemist 8 months ago
@AmatureChemist or you buy it via amazon..:)
TheAllimania 4 months ago
that WAS fuckin amazing lol. Nicely Done
BitchHoliday 9 months ago 3
@BitchHoliday Much appreciated. Thanks!
AmatureChemist 8 months ago 2
@superawsomeninjajizz You can use tree stump remover too 6.39$ tax included.
SergeantNugget 9 months ago
I laughed so damn hard when I heard him say "That was fucking amazing"
teen3564 10 months ago
"that was fucking amazing"
NightmareNewz 10 months ago
castings from power tools such as old chainsaws and porter cable wood saws are magnesium...to test just scrape off paint and pour on some vinegar......wait a few seconds....if it foams up its magnesium.... :D
minuteman2012 1 year ago
Even better idea (YOu get about 40 matches least of 30) cut of 20 match heads crush them so you have a somewhat grainy or dust like powder and there you go =)
TheTrickster626 1 year ago
I tried to light my potassium nitrate, and it is spectricide stump remover, and it wont flare up, even when i mixed it with the same exact magnesium bar. Can someone tell me what im doing wrong please?
wowmodblake 1 year ago
@wowmodblake you need to ball mill the kn03 you get for about 2-3 hours, till it turns a silverish color if using lead tumblers. I ballmill my kn03 for about 12 hours, with outstanding results. no MG for me though.
9DragonMaster 1 year ago
@wowmodblake theres also the chance someone bought the stump remover before you, and replaced it with ordinary sugar so he could get free kn03.
9DragonMaster 1 year ago
@wowmodblake it mite help to grind it with a coffee grinder it makes it real fine..hope this helps ya..george
rubylaser163 1 year ago
Why the magnesium don't spark when you sharp it?
Ubojica6661 1 year ago
@Ubojica6661 because magnesium needs a high heat source to light it, the friction created from the sandpaper isnt enough to make it spark
666TECHNO666 10 months ago
@666TECHNO666 Sorry, I commented this on wrong video XD...
Ubojica6661 10 months ago
@Ubojica6661 lol, ok then...are you talking about the vid where the idiot uses a bench grinder??
666TECHNO666 10 months ago
@666TECHNO666 Yes, right that. Did you know, that flour is verry explosive?
Ubojica6661 10 months ago
@Ubojica6661 really, i would never have guessed flour. although there probably is some different natural chemicals in the wheat that might make it explosive
666TECHNO666 10 months ago
, wait , so if ur just rubbing on sandpaper and the powder that's coming off it is magnesium powder and that is flameable ?
MsHouseboy 1 year ago
you spill that 10 gram you better could put it in an tube and fill it with lime and tape it full closed with a fuse and you get an loud firecracker
strpwnownz4 1 year ago
Good stuff but some constructive criticism... You should use aluminum powder (400+ mesh) it is way better and much easier to use (no sandpaper) instead of magnesium.
diabeticwaffle1 1 year ago
Lol that was amazing
lewberry6 1 year ago
@AmatureChemist what about holding that huge flint block directly in an open flame until red hot, then slamming it on a hard surface xD
mistameanor420 1 year ago
plz dutch version plzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
jrietmolen2 1 year ago
@AmatureChemist Best tut man!!! Now I can buy 10 dollars worth of Magneiseum flints and make M-80s yay your god!
LighterMan98 1 year ago
actually do i nee only magnesium ???
forceablenton1 1 year ago
i did that in my toilet just so that the flame will not spread(just in case) because its my first time burning magnesium
haloreach57 1 year ago
I know its prolly been said before, but make sure you wear proctective eyeglasses when you light this stuff. It is way brighter than the video and could damage your eyes. Friend of mine made some and looked right at it, left a nice redish orange mark in his vision for 5 minutes XD
litematter 1 year ago
@AmatureChemist yeh its works a little better now and
mike12703 1 year ago
@AmatureChemist but i slightly fixed it
mike12703 1 year ago
@AmatureChemist potassium nitrate 325 mesh
mike12703 1 year ago
@AmatureChemist so basically it just dont burn right or dont burn at all
mike12703 1 year ago
@AmatureChemist well it just sparkles a little and oesnt go off and once i added a little sugar to it and it was like sparkling rocket fuel
mike12703 1 year ago
@AmatureChemist mine doesnt work help
mike12703 1 year ago
Thanks!
Decembers1Final 1 year ago
is it okay if some of the sand from the sand paper gets in the mg?
Decembers1Final 1 year ago
lets say i use oh.......10 GRAMS OF EACH >:D how big will the spolson be?
shotgunpi 1 year ago
hm... its really slow.. use finer sandpaper and mix 1:1 by volume (:
antiswattt3 2 years ago
it made me jump lol
jamecrowley 2 years ago
Its good brings a kick ass epic part in it hah
VenomXProduction 2 years ago
be careful magnesium fumes are posionous and will kill...!
david1513 2 years ago
This comment has received too many negative votes show
dont cuss in your vids
kidsgotgame3 2 years ago
I want meh some more videos! Keep it up your videos are awesome!
naxps 2 years ago
"that was fuckin amazing" :P you ar fuckin amazing bro GOOD JOB !
vinay0429 2 years ago
try putting some copper sulfate in it or some other copper compound
wouldn't the explosion be green?
PyroAbsestion22 2 years ago
yup.. but you should use the best ratios.. its in my video of bano3 flashpowder tests q:
antiswattt2 2 years ago
That is exactly the same magneisum "survival" lighter as i have/use :)
...it's the best value where i live
MrWafflesMonster 2 years ago
I had no idea BaNO3 was in sparklers. I wish I had some. I wonder if you ground up the sparklers and removed the iron with a magnet then replaced it with some iron oxide, would it make a much more energetic reaction.
biowerks 2 years ago
i thought also so. But it would be cool if you can make some experiments with the mg/kno3 powder for example with sulfuric acid and make a video of some properties of it :)
Frresh123 2 years ago
no doubt.
zapo147 2 years ago
Wait, isn't potassium more reactive than magnesium, and thus can't be replaced by it in this kind of competition reaction?
pyropakman 2 years ago
Rofl nice commentary.
zapo147 2 years ago
yea.. i actually dried some at 50* C in oven one day.. powdered it as much as i liked and put in a container.. i use that for detonations now.. btw idk if my an/mg is so extremely powerful because im so win at making it (lol) OR because its a little bit wet (magnesium reacting with water reaction?) ''flashpowder deflagration'' is my video called.. somebody flagged it for the real title -.- anyways.. theres iron, alumimiun, bano3 and starch in sparklers (: bano3 = REALLY powerful!!
antiswattt2 2 years ago
soon its new year.. theyre selling TONNES of sparklers.. i do have a tutorial on how to get Ba(NO3)2 from them (: bad quality.. but i think its the only? q: btw.. ammonium nitrate.. i use 3:5 an/mg mine isnt all dry every time.. use by volume/parts.. not good for firecrackers.. dont let it stand somewhere.. for too long (; but youre going to do some flashpowder and such for now? q: but use ferrocerium/magnesium as a fuel and use 1:1 with kno3.. then its 2:1:1 kno3:ferrocerium/flint:magnesium
antiswattt2 2 years ago
hey... you know ferrocerium or flint.. ferrocerium is in zippos.. the zippo flints.. mix magnesium and flint(or ferrocerium) 1:1 then use that with magnesium 1:1 btw i think you gotta use a finer sandpaper for your magnesium.. looks quite slow (: i use a firesteel.. rather wanted a magnesium bar.. but screw it! firesteel is AWESOME flashpowder fuel.. matchpowder/firesteel is really fast too.. 1:1 xD you could try other oxidizers too.. Ba(NO3)2 is VERY powerful with magnesium!!
antiswattt2 2 years ago
try aluminium /magnesium,and use some sodium nitrate if you want a very bright yellow flash-needs more heat to ignite tho
m3sca1 2 years ago
i´ll be using old pencil sharpeners, which usually consist of pure Mg as well! \o/
sciencoking 2 years ago
this is awesome!
I really need Mg metal...
sciencoking 2 years ago
i have a question: does the Mg/KNO3 Powder react also with water like a Mg/AgNO3 Powder ?
Frresh123 2 years ago
ok!
megafeltch 2 years ago
no worries
megafeltch 2 years ago
going to start talking any time soon? dont be shy
DidntKnowWhatToPut1 2 years ago
so where do i get Magnesium
sn1p3r41ife 2 years ago
use 400 grit sandpaper the result is much better and less grinding time
megafeltch 2 years ago
dude never cancel you channel
megafeltch 2 years ago
how strong is this stuff is it equivalent to gunpowder?
Sojaofdapepo 2 years ago
Haha. I so totally agree. That was fucking amazing :P
ikillyou121 2 years ago
you´re right 1:46 fuckin amazing =P science rulz !
Frresh123 2 years ago