how to install LEDs to ur 360 part 1

[TheDisturbedUser]

learn how to use a fkn camera. so out of focus

[JPzSHUffLe]

i hate when people only explain but dont actually show us

[JTGillray]

can you put all the things we need in the discription ?

[ReecesTechInput]

what about 220R ohms? is that not right?

[TheMardayParday]

@MONK10021 did u find out yet i still need to i have the same question,

[barnuu]

In 3:01 is that a green sex toy

[TheHippo00100]

@barnuu I really hope not

[bbonebk]

That's hard and scary

[ElevateParkour]

dude i have the same blanket!

[SHERAZ95]

hey watch my 34 mins light source

[PrimoMakers]

Or you could wire it in parallel and just use 1 resistor.

[pntba11er16]

@mistasnipez Dumbass pointing out things that are irrelevant, black tape/ electrical tape, everybody knew what he meant, and if you have ever been to a store you would know that super glue literally is packaged as "Krazy Glue" depending on the brand, you can Troll out to a different bid now

[mistasnipez]

dumbass doesn't even know what the supplies hes using are called. l0l0l black tape= electrical tape crazy glue= super glue or hot glue l0l0l

[dredful00]

If i were to screw up would it break my 360?

[MrCalinou]

@dredful00 yes there is a 50 50 chance

[matt3rat]

where can i find the ohms cables?

[K1LLERJC]

its not bs, you just did something wrong, i even showed it working

[harryp2k9]

this is bull shit video my xbox dont work no more fucking lier

[harryp2k9]

wow if you watch both of these they actualy help

[mrlonghorns16]

is there like a place i can go to do this or i have to do it myself?

[x1daBr3Dx]

How much volts to the LED need to be for 220 Ohmz resistor?

[leiit1]

Hey,can you write down everything I need to buy (lights) and ....

[TheMasterOfMusic321]

@leiit1 Thumb leiit1's comment up so the guy who maked the video can make a list of things you need to buy ;)

[LolTechTutorials]

You can get 100 leds assorted colors or all one color and 100 free 220 ohm resistor and 100 free 470 ohm resistors. Look Up Satistronics on ebay

[imjerkin247]

Thia kinda confusig cuz of all the wires already there

[elsacko1]

i wana put led strips how would those be?

[lelanddesland]

im doing my xbox and this TUT is a big help and i thank you for that but how many watts do the resistors have to be

[11dainiel]

can i do this without resistor

[11dainiel]

can i do this without resistor?

[DStepHardstyleMixes]

it probably wasnt a good idea to solder on top of your bed because if the solder drops on the bed it could burn it or even set it on fire :)

[CharlesB6977]

do u need 1 resister for each LED light

[alkalionpower]

big ass sticklol

[drewricomakeubu1]

not ahms. its ohms...

[MrSimpleTUTS]

@DTAxProductionsx your stupid. He said RadioShack. You need to get your ears checked bro. I went and watched it again after you posted that and he said RadioShack.

[Prittydanixx]

i made a monster 360 from this :P

[tchamlin13]

i have watched many videos on how to do this and i still have no idea what im doing

[goofywhiz]

Do I need diffused LEDs.. or just the normal ones?

[DTAxProductionsx]

He kept saying he bought them at "Rent-A-Center" You got them at RadioShack.

[BEASTMODEMODZ]

No offense man, but this way of installing LED lights is prehistoric. Don't get me wrong I applaud what you've done and think yor smart, but theres a new product out there called Nexilux 360 STORM that requires no soldering, has like 6 different light choices on one LED strip and a remote. There's a chick gamer that sells them on ebay for $25!!! You should check it out and I bet you'll agree with me. I still gave you a thumbs up though. You should suport her and post this comment.

[WaWxL0bbYz]

how do you connect the wire to the power thing that goes to the cd drive? what do you connect it to?

[TheBrutalPlayer]

PLease put in description information about the lights :P

[adidasprep]

put the caption on this stuff is hilarious

[kurtstewartrocks]

dude i don't know shit your saying

[rayfalcon777]

if they are not longer 9 times out of 10 they have one that is usually either a funky shaped leg like a triangled shape or a square leg on the led and a round one the square is usually the + but ALWAYS check and double check and be positive BEFORE allowing them to go hot( powering them up) otherwise they could catch fire or blow your led's. lolol I have without a doubt worked on tooo many computers to know this much info.

[irJakexD]

I would do this... but it's a bad tutorial and there are no good ones :(

[OHQxELITEOHQx]

its not umm its oohhmmm

[nickyy2626]

Um um um um um um um um ummmmm um

[VADERGAM3R]

im subbing you

[INDEPENDENTPRODUCTS]

What happens if i use 22k-Ohm?

[fitbikeco4g6]

what watt do you need 1/8 1/4 or 1/2???? help me please.

[TheProRussianGamer]

is the ground wire attached to the chassis with 1 side or both? plz answer asap

[coolknowhow]

@TheProRussianGamer i side use the negative to the chassis and put tape on the pos so it doesnt touch the chassis

[dogz1044]

How many times did you say " um " in this video

[browndd]

Thanks to your vids i learned how to do this. Video Response above.

[dynastydb]

that is the poorest excuse of installing lights i have ever seen

[ShockRawTecTalk]

resistors don't drop voltage they control current

[fakeBULL]

what is an UM

[sudsbear54]

AMPS ... NOT AUMPS

FUUUCCCKKK

[LaTopx]

@sudsbear54

OHMS NOT AMPS

FUUUUUUUUUCK

[Lawnboii]

@sudsbear54 he means ohms and kila ohms.

[NBVvideos]

do u have to soter or can u elecrtical tape it on

[xboxkid324]

the way you pronounce ohms through me off. 

[funkymonks127]

@xboxkid324 the way you spelled "threw" through me off.

[secretshorty]

thumbs up if you watched many vids of this and tell yourself tht you will do it but never do it cause you're too lazy :D

[JamesAColemanFan]

@secretshorty I hear ya bro... I've been telling myself i'm going to fix the RRoD in my original 360 and then flash and mod it.. Never have i been arsed to do it.

[Kaluhbrate]

Thanks! Really good tut.

[dj7310]

I'd make a solid ground by screwing in the wire with one of those crimp things on it so you dont have to open it again

[ddd369822432]

I Wish There Was A Radio Shack In England...

[6satan6ist6]

220 oms lol its OHM bro. OH -EM.

[xXCREATERXx]

coulkd you wire it to the other 12v point on the board rather then stealing it from the disk drive?

[lewisgreg981]

BI-LO



[N0RCALGiRL559]

did you use the 220 ohm 1/4 watt or 1/2 watt resistors

[mewhohansan]

On the resistors, is a 0.5watt 10-ohm the same as a 220 amp one ?????? very curious because i live in the UK

[andrewisflyyy]

If you guys dont want to risk messing up the wire to your dvd drive theres pins on the bottom of your xbox under where the power cable plugs in BUT you have to makesure you know the pins there numbered PM me if you need me to tell you.

[ghanda6666]

what cables did u use

[ShadowlessDragon]

Your camera skill are not the greatest...cool stuff nonetheless

[andrewisflyyy]

@ShadowlessDragon im sure he was using it with 1 hand while holding other stuff. _-

[LaurenceLeonard1]

keep it at 12v you knumb nuts lol

[snake10566]

I dont get why they just were not ran in series so you only use 1 resister.

[nesportskid]

thats a beast of a soldering gun

[froddoyo]

You should get a Green talismoon fan with that.

[STSGuitarMan]

what does grammar have to do with tools?

[DAVISEDWARD88]

i had a question i was looking up flexible LED lights would they work the same as the LED lights you installed i mean they are easier to install and they run off12 V power source. so instead of having to solder them all together you could just put one strip all through the 360?

[DAVISEDWARD88]

i had a question i was looking up flexible LED lights would they work the same as the LED lights you installed i mean they are easier to install and they run off12 V power source.

[Rocky13Ray]

if i use the dvd wire for the led light can i add another wire for the fan mod?

[thecrueldeath]

@sempre5 I know the best thing to do is not to do this. But being aware of the risk what other power source can you use. or any suggestion? Maybe even using batteries or a 2nd power plug or something? Also isn't there thinner wires then that?

[froddoyo]

@thecrueldeath Well, My xbox has got. Talismoon Blue fans, which glow when you turn the xbox on. Then, I have a old toy led, It has Three really tiny batteries and a button, There is a green, red and blue led, Fast strobe, slow strobe and fade. I put those in an the wire runs out to the back.. it works good and looks nice, i soon to soder the led INTO the xbox.

[superaci21]

where u buy the led light

[Bcharlery]

@superaci21 radio shack i think

[JJBruzProduct]

@superaci21 He said radio shack like 583 times lol... this video really helps cheers, we dont have radio shack in australia or atleast where i live :(

[diceadams]

hi my names jc lol how ironic- anyway i wanted to know if i could possibly buy a modded xbox from you?

[ovaltine111]

meant to send that as a reply to mrsecretagentman3 my bad

[rddddb]

are they 10 or 5 mm leds



[MrSecretagentman3]

5:38 THATS WAT SHE SAID



[ovaltine111]

shutup pussy

[Anddyproductions]

@ovaltine111 wuts ur prob

[lilBOY993]

watch?v=_Dm8U77J9x4

MUCH EASIER WAY TO PUT LED INTO UR 360

[ToonSxO]

@lilBOY993 funny thing is the smart leds are known to melt the control board that turns them on and off, it doesnt ruin your xbox but then u have to buy new ones an clean up the melted plastic, doing it this way is more creative, safer an take less energy BUT it harder to do....if ur a noob

[home232323]

do u hav to solder

[559MODS]

please replie i am sk8boiie559 i fergot my pass nd cant get it back from yahoo i asked u 1 day how much volts r the leds u used i need 2 no cuz ama do this 2 mine ps u should make a vid on wat cable it is u used from the dvd drive cuz its hard 2 see

[BloodyiBall0]

OK YOU WILL NEED TO KNOW OHMS LAW IF YOU WAN'T TO KNOW PERFECTLY IT IS SIMPLE !!!

[ToonSxO]

so im going to mod my xbox with leds so can i do it like this...

im going to have 20 leds- 5 on each side, can i connect a wire to all of the negitive leads on the LEDs than connect to the metal casing?

and second, can u make a video on how to connect the postive wire to the 12volts cord?

and last after you get the positive wire connected tot he 12volt cord, connect it to the ohm resistor, can i connect all positive leads to this wire? u arnt very detailive in this video an im new

[CommAnd3rX10]

Haha great vid. I love how mexicans always sound like they are constantly asking questions. It's so entertaining lol. (not being racist btw)

[sk8boiie559]

kk u put 3 leds on each side nd the fraim is ground the cable for the dvd drive is positive nd u use 220 oms risisters for them how much volts r the leds u used nd r all of them the same volts

[ltogan1]

you only need one resistor. you need flux for the solder to stick. hey, make a video about water cooling ur xbox.

[jdc746]

thats not how you pronounce ohms dumass

[TigerrHD]

@jdc746 chill tha fuck out its not a big deal just dumbasses like you have to make it one

[iL3GiiTx678]

ok so wat happens to the negative wire wat do we do with that

[iL3GiiTx678]

ok so wat happens to the negative wire wat do we do with that

[BloodyiBall0]

does it matter witch side of the resistert you solder to the positive of the Led ?

[HardRemixx]

there is a better way and you don't even need resistors.

[iFeaRzZx]

want something easier then soldering and buying the LeDS? look up Storm LED v2x

[EvilDxtreme]

My Grandmother has a better soldering iron than that. lol "NOOB"

Sorry had to but it should help some out!

[AnonymousLaughingMan]

omfg, this is some ghetto ass shit! this isnt even step by step, u did half the shit before hand. i hope ur xbox blows up! lmfao

[ScrewBallModder]

how did you attach your wire to the cd drive power cord

[STSGuitarMan]

@ScrewBallModder I did this mod on my 360 it worked and is still working, you have to strip the wire and then it helps if u make the wires into a Y shape, and at the joint cover it with thermo wrap or Electrical tape :)

[STSGuitarMan]

@panda100123 I did this mod bout a month ago msg me what you need help with and i'll do my best to help you out.

[panda100123]

@STSGuitarMan i thought i removed my comment lol...anyways, sorry but im gona buy a led strip with a remote control for 20$...Ill sub to u for atleast being genorous lol

[GamingHouseStudios]

Man I did everything u said to do in your videos wen I was trying to test out the 360 I turned the power on n the led lights didn't turn on can u please tell me wut I did rong

[ihackx360]

dude that did not help at all

[shahineisawi]

i was 8 when i first took apart my 360 im 11 now

[GuitarCaliburx]

Guys LEDs are nice but they're risky just buy lights for xboxs they shone just as bright and only take ten seconds

[eZiReFame]

270 work?

[thormx47]

Thats sloppy!



[easterrbunnyy]

is there a big risk of ruining xbox while adding led lights

[ScrewBallModder]

@easterrbunnyy you can shock your self 

[steelers4life130]

@easterrbunnyy only if your retarded

[HardRemixx]

@easterrbunnyy if your like realllly don't no what your doing.

[Rocky13Ray]

@easterrbunnyy sorta

[madassgamer08]

@easterrbunnyy only if u wire it wrong

[BloodyiBall0]

@easterrbunnyy no noob

[ProMediaShare]

@easterrbunnyy at the most, it will void your warranty, but if you are inexperienced when it comes to soldering jobs, then you shouldn't try this.

[soulfire292]

@easterrbunnyy not if you have a big enough psu... and solder them to the right place- hope this helps if you do it this way it is perfectly safe

[VicToRMrOwKa]

@easterrbunnyy NO they draw almost no power



[xLoganMx]

@easterrbunnyy No not realy unless you are retarded

[robthatguyx]

@easterrbunnyy any mod poses a big risk but if u wanna mod the only way to get better is practice, it isnt a cheap hobbie

[robthatguyx]

@easterrbunnyy ive smashed a xbox out of pure frustration but i have myne red and black with a 120mmfan hardwired and a switch to run between 5over to 12 volts for the ohm fan

[2009ryanbennett]

stop sayin er u fruit cake 

[Lorenzo763]

Solder can stick to metal when u put flux on it!

[tubomodz]

dude your retarted! you dont solder ground to the case! you are basically making the case into a power line! turn your 360 on and touch the case! you will electricute yourself! Is this your very first soldering job! also solder does stick to metal! that is the only thing that it sticks to! You are not getting the area where you are solder hot enough to have the solder stick! also, if xbox live happens to run a scan while that xbox is on and the dvd drive is running, your xbox will get banned!

[rserko]

how many watts should i use for the solder

[Ste3althKidz]

How many Ohm things do u use for each LED light?

[L3moNModdingFR]

What type of LED please

[vinnnnnnnnyyyyyyyy]

this is a terrible video... im sorry, im not trying to be rude... and making the whole xbox counsle a ground. is a terrible i mean down right stupid idea.

[STSGuitarMan]

I'm not meaning to be rude but if your going to make an instructional video, you should learn the names of your tools. :)

[GarrettBMXes]

@STSGuitarMan I'm not meaning to be rude, but if you're going to make a comment telling someone to know what they're doing, you should learn to use proper grammar.

[RoguePreatorian]

what if you get the 3 red rings after you connect the LEDs to the CD power source. (I have fixed the RROD on this XBOX already...and it worked before I attempted to add the lights) Any help??

[InstinctMods]

Can u do a tutorial how to Jtag a falcon motherboard? plz

[BLACKmambaa247]

theres a less complicated tutorial on here this tut is shit

[honata999]

gaming-sector.co.cc/forums/ind­­ex.php

[theonlykfizzle]

get a tripod man, just a thought.

[TheSteffanShow]

dude why not by a light kit like the aroura 4 like 7 bucks and save yourself all of this work

[pacco1133]

you have gross fingers lol

[TacticalNinja96]

around 8:40 were you expain the sodering the negative to ground dou you souder alll the negative to gethar and the end one to the chasey

[sonic4sale]

you show us how to install the lights but not what to connect/solder them to, to make them turn on when the 360 turns on.

[TacticalNinja96]

@sonic4sale in the begining when he showed the spliting from cd wire thing when the xbox is on that is how the lights turn on

[B3ASTMODZ]

join b3astmodz.info for the lateset modz and cheapest leds nice post

[csmanofshit]

Not blacktape but Electric tape ;)

[xSNIPESxful]

This sounds complicated:(

[TheOtherMedik]

dude good idea on that but i would rather just buy a red and a green light kit and wire the switch to them

[Minesr357pete]

can u tell me how to wire it too the 360 and the led, resistors wireing?

[jraconos]

does it have to be speaker cable

[harmond2]

@jraconos no you can use any kind

[deathbyflowerpower]

8:09 i dont know wot ur going on about