Where do you buy or found this ferrofluid ? I'm french and i'm 14 and Sciences interresting me a lot. Where can I found so many informations about this ? Thank you !
@sgtdlesavenport hahahaha ,Anyone can get pussy easily ,but Do you even know what's happening in this video? I bet you don't see knowledge is hard and For your kind of comment you must be lacking some.
@ThePatocheStriker I tried it with liquid nitrogen, it hardens - but it is so cold that attracts humidity and the next action is to clean the oil and water mix.
My sister is a science teacher...I think something like this would make a great gift for her and her students. Do you or does anyone know of where I can purchase something the manipulates the ferrofluid like this?
@chaserivz a strong magnet. the person in the video used a really strong magnet and put it under the table and basically turned the magnet so that the ferrofluid would basically go up the meat grinder
@cleave6 As mentioned before in the comments, take copper wire and wind it around an iron bar. A dc-current will magnetize the iron. In this case for 6000 turns and 6A it took around 80kg of copper. For a smaller size coil it could be less.
@manf1234 Sorry, I'm trying to make one of these myself and I'm running into trouble... What were the core dimensions of your electromagnet. (i.e. solid iron 6" in diameter, and 3" thick, etc...)
Also, does the diameter of the electromagnet need to be similar to the base of the meat grinder piece your magnetizing, or does that not matter?
@KDCindustries It will not help to tell you to work with certain dimensions and spend a lot of material and money not knowing what you want to get and for which effort. At least for most households it will be more than a weekend project. Some might prefer to make a simulation of a system before building it.
@manf1234 I understand that fact painfully well, believe me. I've been working on this stuff for months now. I've built a few of my own electromagnets that just weren't strong enough for one reason or another. Honestly, the hardest part for me has been finding iron to use as the core.
As far as running magnetic simulations go, what program would you recommend? SolidWorks (which is what I use most often) doesn't have magnetic simulation as a features.
@ch2011ww In the shown configuration the meatgrinder is one end of a cylinder magnet. The field distribution shows a (more or less) steady increase towards the top.
So like I saw how to make it, ink oil and magnet. And I know that different metal sculptures with magnets will.....thats where I get lost. How artistic could you potentialize the effect. This could be a major idea for a commercial.
i want to get clothes that are made out of magnets and get a pool filled with ferrofluid and put my hand in that pool and i will look like venom from spiderman
International musicians cooperate to release a historic UK single Freedom for Palestine. Release 3 July
Freedom for Palestine - OneWorld
youtube.com/watch?v=V28HnPTYz-I&feature=feedlik
Pre-order now from ITunes & HMV Digital 2011.
Featuring: Maxi Jazz (Faithless), Dave Randall (Slovo/Faithless), LSK, comedian Mark Thomas, Jamie Catto (1 Giant Leap), Andrea Britton, Harry Collier, Sudha Kheterpalthe London Community Gospel Choir and many more!
@Smithburg01 Ferrofluids are made by mixing metal particles in a liquid. You should be able to Google around for instructions on what materials make good ferrofluids.
its alive!
reapzilla 3 days ago
Future power source/propulsion, anyone?
nitroxide2011 3 days ago
That's one cool ass spikey snake. ^_^
CallMeQuinnie 6 days ago
Where does one acquire or make this fluid?
mummyjohn 1 week ago
@mummyjohn google: ferrofluid price
manf1234 6 days ago
Beautiful!
I would like to know about the source of magnetism. You say it is an DC elctromagnet?
Of how many volts and amperes?
Thanks
TheBonjoman 1 week ago
But will it blend . . .
xXAaron771Xx 1 week ago 2
KILL IT WITH FIRE!
Kelsonie8293 1 week ago
Does it bite? And if it does, will I turn into a T1000?
MotorMouth930 1 week ago
All seems rather T2 to me. I'm a bit scared XD
samwisethree 2 weeks ago
.....hands-free vibrator
aww yeah
elsquisheeone 2 weeks ago
Comment removed
elsquisheeone 2 weeks ago
This has been flagged as spam show
ITS LIVING!
MattGreyDesign 2 weeks ago
ITS LIVING!
MattGreyDesign 2 weeks ago
science!
PattyMMelt 2 weeks ago
looks unfamiliar
MrTelefant 3 weeks ago
I always thought these things were filmed with time lapse techniques, thanks for proving me wrong by holding the camera yourself!
jonthamo 3 weeks ago
2:34
monsterblood2000 4 weeks ago
What is this and how do I replace my blood with it?
ConvictiveDemagogue 1 month ago 5
is that real?its amazing!
XMisterKnisterX 1 month ago in playlist Weitere Videos von manf1234
That's the work of the DEVIL.....
DIECASTER 1 month ago 2
1:37 when the Ferrofluid is on the meat grinder for those wanted to see it
noah962 1 month ago
looks like what the suit from crysis 2 is made from
BRAKESUK80 1 month ago
That tray looks a dirty as a frenchman!
TheGreatSteve 1 month ago
Where do you buy or found this ferrofluid ? I'm french and i'm 14 and Sciences interresting me a lot. Where can I found so many informations about this ? Thank you !
enferss 1 month ago
@enferss make your own. here's a video
/watch?v=vsQh1AT6qUE&feature=g-vrec&context=G2ea5d4fRVAAAAAAAAAQ
flowiepanda 1 month ago
I-It's eating her! And then it's gonna eat me! OH MY GOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOODDD!!! o A o
KuribohBaby 1 month ago
um, wtf
thingkinfast 1 month ago
Would this work with any shape of metal or are conical screws the only things with suficient flux density.
Aldariuna 1 month ago
Thouch it ;)
keosni391 1 month ago
this is like tenticle porn
chickenmonstroh 1 month ago
Why are th ere random spac es in your writ ing?
Midnightsun115 1 month ago 15
@Midnightsun115 It is an option of the title generator of my video editor.
It is named space generator and it is only provided in the extended version but I did not read the manual.
manf1234 1 month ago 13
WHAT SORCERY IS THIS?
TheChuchulainn 1 month ago 2
this's beautifull!
nhesusrz 1 month ago in playlist Más vídeos de manf1234
ink heart
YektenMarjinal 1 month ago
Mein gott. It's Milton Fine.
IriathZhul 2 months ago
fake and gay
BIEBERBRO420 2 months ago
Its a McDouble after a few weeks
masso172 2 months ago in playlist More videos from manf1234
Finally somebody tells me how this works!
Variaman 2 months ago
w the freak is it
afrobunny247 2 months ago
wat would happen if someone had a metal limb and this stuff went on them?
TheLolzLizard 2 months ago
Comment removed
pedromoratalla 2 months ago
so when can i touch it?
vincster666 2 months ago
This...This is what our children will be made from in the future...
TheDancingBurrito 2 months ago 30
Comment removed
sgtdlesavenport 2 months ago
@sgtdlesavenport hahahaha ,Anyone can get pussy easily ,but Do you even know what's happening in this video? I bet you don't see knowledge is hard and For your kind of comment you must be lacking some.
TheValalupe 2 months ago
@TheValalupe
One of the few perks of taking an Ambian is doing stupid things you regret the next day. That comment I made is one of them and I apologize.
sgtdlesavenport 2 months ago
@sgtdlesavenport It's all good man.
TheValalupe 2 months ago
Now what if you put Liquid Hidrogen on the ferrofluid, with be hardened ?
ThePatocheStriker 2 months ago
@ThePatocheStriker I tried it with liquid nitrogen, it hardens - but it is so cold that attracts humidity and the next action is to clean the oil and water mix.
manf1234 2 months ago
1:35 is where is where the show begins
Your welcome.
DeadCaseyJones 2 months ago
It's the symbiote!
premiumlager7 2 months ago
Will it blend? >:)
TheKidWhisler 3 months ago
Is ferrofluid poisonous?
Kinda reminds me of Mercury
Weemancake 3 months ago
@Weemancake Not really - it's finely ground iron and oil. You can smell, but not eat
kalleguld 2 months ago
1:36 thank me later.
RETARDlCON 3 months ago
it looks like a snake
ryoryox 3 months ago
did you tuch it?
Mr1mathi1 3 months ago
So is thios magnetic flux stuff dangerous? as in if you accidentally swallowed a bit, would it cause bodily harm?
Julibugs357 3 months ago
NO YOU FOOL, This is exactally what Skynet wants. Didn't you see Terminator 2.
Beastrider9 3 months ago
Does it Bite?
david11movie 3 months ago
how the hell did i get here?????
JAVu52 3 months ago
VENOM!
spikerdude111 3 months ago
does it come off easily?
york246 3 months ago
My sister is a science teacher...I think something like this would make a great gift for her and her students. Do you or does anyone know of where I can purchase something the manipulates the ferrofluid like this?
chaserivz 3 months ago
@chaserivz a strong magnet. the person in the video used a really strong magnet and put it under the table and basically turned the magnet so that the ferrofluid would basically go up the meat grinder
cow1234ful 2 months ago
Isn't this what made Spiderman evil?
ImperfectTurtle 3 months ago
Thanks for making magnatism visible, aren't natural Forces beautiful!
shenergy47 3 months ago
Wouldn't the current be stronger more towards the bottom of the screw?
Galorious330 3 months ago
This has been flagged as spam show
Checkout this video
watch?v=Ny0rEvjbstc
AdEMotion1 3 months ago
What the flux?
SulfuricAcidChugger 3 months ago
@manf1234 i am trying to figure out how you adjusted your magnet's power. where did you find an adjustable DC magnet?
cleave6 3 months ago
@cleave6 As mentioned before in the comments, take copper wire and wind it around an iron bar. A dc-current will magnetize the iron. In this case for 6000 turns and 6A it took around 80kg of copper. For a smaller size coil it could be less.
manf1234 3 months ago
@manf1234 Sorry, I'm trying to make one of these myself and I'm running into trouble... What were the core dimensions of your electromagnet. (i.e. solid iron 6" in diameter, and 3" thick, etc...)
Also, does the diameter of the electromagnet need to be similar to the base of the meat grinder piece your magnetizing, or does that not matter?
Thanks!
KDCindustries 2 months ago
@KDCindustries It will not help to tell you to work with certain dimensions and spend a lot of material and money not knowing what you want to get and for which effort. At least for most households it will be more than a weekend project. Some might prefer to make a simulation of a system before building it.
manf1234 2 months ago
@manf1234 I understand that fact painfully well, believe me. I've been working on this stuff for months now. I've built a few of my own electromagnets that just weren't strong enough for one reason or another. Honestly, the hardest part for me has been finding iron to use as the core.
As far as running magnetic simulations go, what program would you recommend? SolidWorks (which is what I use most often) doesn't have magnetic simulation as a features.
KDCindustries 2 months ago
@KDCindustries FEMM could be a good start, as freeware, (in polar coordinates).
manf1234 2 months ago
TRANSFORMERS :D:D
pukti14 3 months ago
0:22 does it smell like chicken?
xSwiiFTxTriicKsx 3 months ago
0:11 you can see a sexy bitch
chadwardennz 3 months ago
how to u get that stuff
jcdude8310 3 months ago
Can i get thumbs up for nothing?
NicSchumi 4 months ago
NEAT! :D
JenniferWalton 4 months ago
what if you drank that?
avengedxseven1 4 months ago
dont let it touch you, ull be venom from spider man
fryybabi33 4 months ago
That's pretty cool. Where can I get some of this stuff?
senorcrab 4 months ago
it seems evil 2:10
cncsmarty 4 months ago
it seems evil
cncsmarty 4 months ago
and at 1:36 you have created an alien life-form!
Nonchalants8 4 months ago
@TheLordMilton
... uncalled for?
Robubbabub 4 months ago
Oh god damnit Phyrexia, take everything why don't you?
DoragonShinzui 4 months ago
thb if u wanna to tuch it!
ROMANI15ful 4 months ago
ITS GOING TO EAT THE MAGNET!!!
DinoVideoman 4 months ago
would it climb you if you touch it
52684 4 months ago
You can easily make this stuff with vegetable oil and ink toner. All you need after that is a magnet, a strong one.
MrStaleningrad 4 months ago
I don't find this hard to masturbate to...
Robubbabub 4 months ago
@Robubbabub ..I suggest you try to pick your nose, in a darkened room, with a pitchfork.
TheLordMilton 4 months ago
So would 2 different types a ferofluid react to each other like magnits or would they repulse each other plz reply
nagato123ful 4 months ago
had I been there, I'd have screamed "ITS ALIVE!!!!"
:D
MrBipulpandey 4 months ago 31
This has been flagged as spam show
thumbs up if you would want to touche it!!!!
mindaugux 4 months ago
Can I touch it? Please???
SoEAvatars 4 months ago
I WANNA TOUCH IT :3
gh3god129 4 months ago
How do I make one?
textkestrel 5 months ago
why do they form spikes?
Alesandros356 5 months ago
I want to get some of that
MyGrassIsGreenest 5 months ago
Can I ask what the songs were?
rovinglycan 5 months ago
NO SPIDERMAN! DON'T TOUCH IT! YOU'LL BECOME CORRUPTED BY THE SYMBIOTE!!
LUISELPOLLOLOCO 5 months ago
i have no idea what this even is but it looked cool in the pick
TEDEBAGOS 5 months ago
(S) Skynet is coming, Skynet is coming
t800assberg 5 months ago
This has been flagged as spam show
who the fuck r the ppl in the back?
heavymigration 5 months ago
i have a question if i put gold flakes in the liquid will it mess with the magnatizm
bloodlust177 6 months ago
Who divided by zero?!
Nickolakis21aek 6 months ago 15
is the meatgrinder magnetic on its own? would the ferrofluid react to it if it wasn't connected to the electromagnet?
ch2011ww 6 months ago in playlist Ferrofluid
@ch2011ww In the shown configuration the meatgrinder is one end of a cylinder magnet. The field distribution shows a (more or less) steady increase towards the top.
manf1234 6 months ago
@manf1234 can u touch ferrofluid?
TheGameplays101 3 months ago
we should totally be able to use this for something. reply w/ ideas
ididnotsignin 6 months ago
but will it blend
maskman6969 6 months ago
Do you have any details on the electromagnet you used? Number of turns, shape, construction, size?
I'd be very grateful, thanks!
frankstrudel1 6 months ago
Thumbs up if you had to read the description 3 times before you figured out what the hell it was talking about.
shaymayca1 6 months ago
would it be alright to use this as a science project?
lalalandgroupie221 6 months ago
This has been flagged as spam show
Question is: CAN you eat it??
fearmycomments 6 months ago
Someone needs to make a tutorial on making one of these.
abc123icuucme 6 months ago
Weird, stuff, lovely vid!
AintBigAintClever 6 months ago
FAKE LOOK IT'S PLASTIC!
RoboticusMusic 6 months ago
@RoboticusMusic its a magnetic liquid dipshit
SexyKush420 6 months ago
@SexyKush420 nah its not.
RoboticusMusic 6 months ago
@RoboticusMusic yea it fucking is are you mental? you can make it by taking the ink out of an ink cartridge
SexyKush420 6 months ago
@SexyKush420 WTF KID ARE YOU METAL??! \m/
RoboticusMusic 6 months ago
i love how it always looks like a bunch of blobs partying
slipknot0259 7 months ago
sweet
patmac573 7 months ago
reminds me of venom from spiderman
25alo2514m 7 months ago
thank you for explaining how this beautiful process is done. wouldn't it be amazing if done on a larger scale!
susieboo74 7 months ago
fuck
Kabbeats 7 months ago
Drink or Inject ur veins with this shit and then get an MRI
hallariousct 7 months ago 60
@hallariousct lol no thanks.
daniyellowjello 7 months ago
This has been flagged as spam show
Thanks for the new science project
CHINTASTICQuesadilla 7 months ago
...I don't remember smoking weed today.....
aramilalpha 7 months ago 3
And that's how the Android from Terminator 2 was born.
Akatsukik13 7 months ago
So like I saw how to make it, ink oil and magnet. And I know that different metal sculptures with magnets will.....thats where I get lost. How artistic could you potentialize the effect. This could be a major idea for a commercial.
btyler4606 7 months ago
this is amazing
plda123 8 months ago
that is scary.....
videowizdude 8 months ago
Spiderman!
CJFRANKS7 8 months ago
1:37
huloguy20 8 months ago 5
im scared
galenator123 8 months ago 3
i want to get clothes that are made out of magnets and get a pool filled with ferrofluid and put my hand in that pool and i will look like venom from spiderman
huskieboy123 8 months ago
This has been flagged as spam show
thumbs up if you got no idea whats going on and why you are watching this vid
MexicanKola 8 months ago
thumbs up if u have no idea how you got here :3
shoesize15w 8 months ago 540
@shoesize15w This is how youtube became a place for people with no directions... :D
piarronbz 7 months ago
@shoesize15w i came here from minecraft somehow...
TheRubbenn 6 months ago
@shoesize15w I got here from watching the blood test scene from the Thing.
AdrenalineAddict610 6 months ago
@shoesize15w Left for Dead Videos Brought Me Here XD
Billybob98Vids 6 months ago
@shoesize15w Best comment I've read in forever.
StackCityEntOfficial 4 months ago
@StackCityEntOfficial woooow apparently over 500 people agree with you lol
shoesize15w 4 months ago
@shoesize15w Crazy right? lol
StackCityEntOfficial 4 months ago
@StackCityEntOfficial i think this is a new record lol
shoesize15w 4 months ago
this shit is pure evil!
DeathFromAbove1985 8 months ago 3
nice! hey what is the music u used?
bacanright 8 months ago
Lol a musician can take over the world with verofluird
videomaster635 9 months ago
How did you magnetize it? Without a copper wire to send a current through i can't figure it out? Thanks
Hansgruber0090 9 months ago
who else had the idea of making some kind of armor with this fluid that could shape-shift?
ZiozoneEmperor 9 months ago
2:20 it has a afro :D
pupluvr2222 9 months ago
fucking magnets how do they work
xdansivarx 9 months ago
where do i get this stuff?? how do i make the object fluxuate with magnetism?? explain haha i want to understand so i can try.
china0090 9 months ago
thumbs up for the eighties pop/rock =D
Amalekites 9 months ago
This has been flagged as spam show
International musicians cooperate to release a historic UK single Freedom for Palestine. Release 3 July
Freedom for Palestine - OneWorld
youtube.com/watch?v=V28HnPTYz-I&feature=feedlik
Pre-order now from ITunes & HMV Digital 2011.
Featuring: Maxi Jazz (Faithless), Dave Randall (Slovo/Faithless), LSK, comedian Mark Thomas, Jamie Catto (1 Giant Leap), Andrea Britton, Harry Collier, Sudha Kheterpalthe London Community Gospel Choir and many more!
Release 3 July 2011...
BlackRoof 9 months ago
Je n'ai pas très bien compris....
pourriez vous m'aider?
Rubikorigami 9 months ago
at 2:16 i really wanted to poke it!
elliybear 9 months ago
That why I love youtube
Kazerst 9 months ago
Удивительная магнитная жидкость в безопасных бутылочках
magnitfluid.ucoz.ru/
fopf1557 10 months ago
You should do one in the shape of the terminator from T2 lol. But how is this liquid made?
Smithburg01 10 months ago
@Smithburg01 Ferrofluids are made by mixing metal particles in a liquid. You should be able to Google around for instructions on what materials make good ferrofluids.
MaaveMaave 9 months ago
Where can i get some of this Jesus fluid?
animepwn3r 10 months ago
What did you use for a power supply? A 12v car battery or something?
ldu02115 10 months ago
@ldu02115 In this case it was a switched lab. power supply 150V 5A, it needed to be adjustable to measure the field distribution.
manf1234 10 months ago