TM P90 High Speed 55 rps

[TotalChaos1231]

thumbs up for noveske!

[TheApplepoo100]

soundslike a minigun lol

[bobthebombable]

yep brutal and impressive but in airsoft at the sites i go to completely useless we have a 600 round limit per game and that would last all of 10 seconds

[bobthebombable]

@monsimand i know where you are coming from but that calculation is a bit off a 30 round mag would last 0.0545 seconds recurring

[monsimand]

@bobthebombable whoa, my jaws just fell off, thats stupidly fast, highcap all the way :D

[reeckoza]

i would put a 5000 drum mag on my 1500 round p90 drum mag

[appsNstuff]

is it possible to get one of these firing at 350 fps?

[InstinctAirsoftTV]

Very nice rate of fire. sucks to be on the other end of that.

[Doomcommin]

Does the Box mag keep up with the ROF :) ?

[ablahblah54]

That's awesome lol....tick off everyone at the field by blaring that Noveske at 55rps man! :D

[Doomcommin]

Dude, which magazines can keep up with this ROF?, which M4 magazine is that ?

[bf2lover42]

@Doomcommin Drop your regular mag on the ground, fully loaded. See how 100 bbs just flew out in less than a second? If not, drop it again.

[Doomcommin]

@bf2lover42 That doesent make any sesne?

[bf2lover42]

@Doomcommin it does. As soon a mag releases it's BBs they will fly out in less than a second. Magazines are perfectly capable of feeding +50bps, but I'm not sure what is the limit.

[Doomcommin]

@bf2lover42 Yes, but not all magazines can feed up to 55 Rps, i believe the only ones that can feed in this speed are G&G 450's

[Homer2591]

how fast is a magazine empty ? ^^

[SaitekFreak999]

@Homer2591 5-6 seconds on a 300 rd HiCap

[JonasTheSniper]

That thing looks more like some sort of cannon that's meant to be surgically attached to your arm! AWESOMEEEEEEEEEEEEEEEEEEEEEEEE­EEEEE!

[nitromehane189]

can the magazine keep up?

[flameboy3456]

stripped geears makes the gearbox sound like that

[andromedarr]

@flameboy3456 He does not have stripped gears

[shiskabobilitious]

@flameboy3456 lolwat...............

[Horhey232]

hows the feeding on it?

[airsoftjoe12]

@1000spook dude your bullshit gtfo

[TeamSpecOpsAirsoft]

How much would it cost to make it as highspeed as possible and under 350?

[1000spook]

dude u massacred your gun with that shit high cap mag piece of shit don't know why ppl put those on the p90

[busterlonghorn]

@1000spook Someones been trolling...

[xxbladerunner71xx]

@1000spook if you have a lot of M4/M16 mags

[skimowhite586]

@1000spook FUCK IT I WOULD PUT A 5000 high cap box mag on that shit

[tripwireza1977]

@1000spook Its a personal prefrence thing I too have a Box mag on my P90. The High Cap mags for the P90 are crap and also you need to take them out to wind. I have other guns and want to try and keep my mags M4 so I can use one type for all. Its not a stupid thing to do at all plus you are up 1200 bbs in that box =)

[JackassHelmets]

@1000spook we use box mags in high rof p90s as standard p90 mids n highs cant feed fast enough

[KaoVSMogiz]

aye did i go to insight with you? im the short asian kid.

[MrZippy1315]

dam can i be on ur team i dont wanna get sprayed by u!!!

[tehsuperepicpwnzor]

How........... how? 0_0

[teamkvs]

were can i get the gears u use

[DAT183D]

I only need 1 to 3 bb's to hit a guy , you need 3000² ? ^^

[ryandonian]

Jesus... that sounds like an air compressor.

[churchhate]

schwul



[sekundary1]

:O

[HGClark]

have you ever burnt your trigger contacts? because i did using a 10.8

[H4nz08]

Where did you buy the dual sector gear?

[ProgDrummerJDG]

sounds like an anus

[21185003239070]

haha it sounds like someone playing tennis on single fire. like if you agree

[hellfireinator]

Lol handle held mini gun

[ZombiePeppers]

im tryin to find a tightbore barrel and and silencer for my Echo 1 E90, but im not really sure what im lookin at... if any could link me a barrel that will work. i'd appreciate it!

[Drumdudeck]

if you want to replace the parts every hour....

[74guitarmen]

total minigun

[TheSk0rpion]

It Sounds like a coffee maker  :-)

[808RJR]

my bottom jaw dropped.

[InternetFreak1088]

Please stop. Its starting to scare me. It sounds like a demon screaming. D:

EPIC!!!!!! >:O

[bossconnor7]

like like like like!

[busterlonghorn]

It's an amp high torque.

[AustrailianIchigo]

@busterlonghorn hey, theres a simple in-line burst on sale at airsoftpost thats programable from 1-9 rounds and its only $50 bucks. just put deans connectors on either side, leave it in the battery compartment, and connect it when you feel like bursts instead of full auto. product number:

Wiring_MTX_Burstwizard

it even says that its li-po ready. hell, it says its good on up to 16v. get your self that and a 12.8v Li-FE battery from ebay all for under $100!

[busterlonghorn]

@AustrailianIchigo No

[HGClark]

@busterlonghorn lol way to be boss

[Z2theONA]

@busterlonghorn Can you take a video from further away with the amplifier on and off so we get a real appreciation of the noise difference? The amount of noise it puts out at the muzzle doesn't mean as much as how much it puts out at like 30-40 feet.

[busterlonghorn]

@Z2theONA This gun has been sold for awhile now. 

[Z2theONA]

@busterlonghorn well damn.

[andromedarr]

@AustrailianIchigo REAL LiFePo Batterys are 13,2V with 4 Cells and 9,9V owith 3 Cells and have better C Rating (60C) and better Capacity (1100-4400mAh) than the MadBull ones

[J12242]

damn, wat motor?

[Killasniper232]

a fucking lawnmover :D

[xball22]

Dammm

[FuckingOwnd]

Damn. I didn't know they made mags that feed this fast.

[hooramarines]

its a mini mini gun lol

[TheBelva85]

Would normal mags work with this rate of fire?

[Grass221]

Riot SC dual sector gear FTW. Good luck replacing the T-plate every 5k~ 6k rounds for those who are interested in this kind of set up. Also the gears along were $120.

[OrdinatorMan]

It sounds like my dad's lawnmower...

[unrealerror404]

what gears do you have on it?

[busterlonghorn]

@InvokeZero, yes that's possible, but this gun is costing me so much since it requires very high quality parts, that I can't really afford a mosfet. Thanks for the compliments tho :)

[InvokeZero]

My god I just jizzed in my pants.... how reliable is that gun? It sounds absolutely perfect!

[dey005]

use dual sector chip gears, settled guarder sp100,DF full teeth piston body, a 4cell lipo and the fastest motor you can find

[maxipinson05]

Dude, didn't your gears burn out?

[Heheh274]

@maxipinson05 Their SiegeTek. They literally last for ever. Iv'e had 5 Supercore Pistons break on my high speed gun and my gears are showing minimal wear and tear.

[Heheh274]

lol I have something similar with an M4.

[busterlonghorn]

+1, this has cost me in excess of 600 not counting the hours and hours of labor.

[InvokeZero]

@busterlonghorn Then honestly you have the best sounding airsoft gun I have ever heard. If there was any way of being able to get a mosfet programmed to fire a 3(6 in your case) round burst in semi you would have the ultimate mid range airsoft gun.

[fanofCOH]

my .2 cents. if your asking how much this will cost or what is needed, then you have no business in the high speed world.

[SuperSonicSith]

From the sound of it, can I assume that you are having no feeding issues using a box mag at that speed?

[iamblackism]

hey could you write those parts down and tell me how much they would be on evike

[busterlonghorn]

@iamblackism - Dude...Evike is not gonna have anything from this build except like the bushings.. And unless you are very expierenced with tuning, this build will not work for you.

[ProgDrummerJDG]

@iamblackism lol, fail.

[busterlonghorn]

It's a bravo piston.

[patokme]

what piston are u using?

[busterlonghorn]

@legoguy69 - Well about 200 ~250 of parts. Ill do a parts list if you're really interested

[legoguy69]

how much would that cost partswise to do that to a Ca p90? and what parts are needed

[busterlonghorn]

I'm using an AMP high torque motor.

[sniperjesus]

Good stuff!, Dannys gears are on a different level ;) What motor are you running in that?